Re: [PATCH v6 11/12] drm/exynos: atomic dpms support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Inki,

2015-05-22 Inki Dae <inki.dae@xxxxxxxxxxx>:

> Hi,
> 
> On 2015년 05월 22일 05:02, Gustavo Padovan wrote:
> > From: Gustavo Padovan <gustavo.padovan@xxxxxxxxxxxxxxx>
> > 
> > Run dpms operations through the atomic intefaces. This basically removes
> > the .dpms() callback from econders and crtcs and use .disable() and
> > .enable() to turn the crtc on and off.
> > 
> > v2: Address comments by Joonyoung:
> > 	- make hdmi code call ->disable() instead of ->dpms()
> > 	- do not use WARN_ON on crtc enable/disable
> > 
> > v3: - Fix build failure after the hdmi change in v2
> >     - Change dpms helper of ptn3460 bridge
> > 
> > Signed-off-by: Gustavo Padovan <gustavo.padovan@xxxxxxxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/bridge/ps8622.c             |  2 +-
> >  drivers/gpu/drm/bridge/ptn3460.c            |  2 +-
> >  drivers/gpu/drm/exynos/exynos_dp_core.c     |  2 +-
> >  drivers/gpu/drm/exynos/exynos_drm_crtc.c    | 99 ++++++++++++++++-------------
> >  drivers/gpu/drm/exynos/exynos_drm_dpi.c     |  2 +-
> >  drivers/gpu/drm/exynos/exynos_drm_drv.h     |  4 +-
> >  drivers/gpu/drm/exynos/exynos_drm_dsi.c     |  2 +-
> >  drivers/gpu/drm/exynos/exynos_drm_encoder.c | 27 ++------
> >  drivers/gpu/drm/exynos/exynos_drm_vidi.c    |  2 +-
> >  drivers/gpu/drm/exynos/exynos_hdmi.c        |  6 +-
> >  10 files changed, 71 insertions(+), 77 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/bridge/ps8622.c b/drivers/gpu/drm/bridge/ps8622.c
> > index b604326..d686235 100644
> > --- a/drivers/gpu/drm/bridge/ps8622.c
> > +++ b/drivers/gpu/drm/bridge/ps8622.c
> > @@ -499,7 +499,7 @@ static void ps8622_connector_destroy(struct drm_connector *connector)
> >  }
> >  
> >  static const struct drm_connector_funcs ps8622_connector_funcs = {
> > -	.dpms = drm_helper_connector_dpms,
> > +	.dpms = drm_atomic_helper_connector_dpms,
> >  	.fill_modes = drm_helper_probe_single_connector_modes,
> >  	.detect = ps8622_detect,
> >  	.destroy = ps8622_connector_destroy,
> > diff --git a/drivers/gpu/drm/bridge/ptn3460.c b/drivers/gpu/drm/bridge/ptn3460.c
> > index 8ed3617..260bc9f 100644
> > --- a/drivers/gpu/drm/bridge/ptn3460.c
> > +++ b/drivers/gpu/drm/bridge/ptn3460.c
> > @@ -260,7 +260,7 @@ static void ptn3460_connector_destroy(struct drm_connector *connector)
> >  }
> >  
> >  static struct drm_connector_funcs ptn3460_connector_funcs = {
> > -	.dpms = drm_helper_connector_dpms,
> > +	.dpms = drm_atomic_helper_connector_dpms,
> >  	.fill_modes = drm_helper_probe_single_connector_modes,
> >  	.detect = ptn3460_detect,
> >  	.destroy = ptn3460_connector_destroy,
> > diff --git a/drivers/gpu/drm/exynos/exynos_dp_core.c b/drivers/gpu/drm/exynos/exynos_dp_core.c
> > index 195fe60..c9995b1 100644
> > --- a/drivers/gpu/drm/exynos/exynos_dp_core.c
> > +++ b/drivers/gpu/drm/exynos/exynos_dp_core.c
> > @@ -954,7 +954,7 @@ static void exynos_dp_connector_destroy(struct drm_connector *connector)
> >  }
> >  
> >  static struct drm_connector_funcs exynos_dp_connector_funcs = {
> > -	.dpms = drm_helper_connector_dpms,
> > +	.dpms = drm_atomic_helper_connector_dpms,
> >  	.fill_modes = drm_helper_probe_single_connector_modes,
> >  	.detect = exynos_dp_detect,
> >  	.destroy = exynos_dp_connector_destroy,
> > diff --git a/drivers/gpu/drm/exynos/exynos_drm_crtc.c b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> > index 3251652..92a5595 100644
> > --- a/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> > +++ b/drivers/gpu/drm/exynos/exynos_drm_crtc.c
> > @@ -22,51 +22,57 @@
> >  #include "exynos_drm_encoder.h"
> >  #include "exynos_drm_plane.h"
> >  
> > -static void exynos_drm_crtc_dpms(struct drm_crtc *crtc, int mode)
> > +static void exynos_drm_crtc_enable(struct drm_crtc *crtc)
> >  {
> >  	struct exynos_drm_crtc *exynos_crtc = to_exynos_crtc(crtc);
> > +	struct exynos_drm_plane *exynos_plane = to_exynos_plane(crtc->primary);
> >  
> > -	DRM_DEBUG_KMS("crtc[%d] mode[%d]\n", crtc->base.id, mode);
> > -
> > -	if (exynos_crtc->dpms == mode) {
> > -		DRM_DEBUG_KMS("desired dpms mode is same as previous one.\n");
> > +	if (exynos_crtc->enabled)
> >  		return;
> > -	}
> > -
> > -	if (mode > DRM_MODE_DPMS_ON) {
> > -		/* wait for the completion of page flip. */
> > -		if (!wait_event_timeout(exynos_crtc->pending_flip_queue,
> > -				(exynos_crtc->event == NULL), HZ/20))
> > -			exynos_crtc->event = NULL;
> > -		drm_crtc_vblank_off(crtc);
> > -	}
> >  
> >  	if (exynos_crtc->ops->dpms)
> > -		exynos_crtc->ops->dpms(exynos_crtc, mode);
> > +		exynos_crtc->ops->dpms(exynos_crtc, DRM_MODE_DPMS_ON);
> >  
> > -	exynos_crtc->dpms = mode;
> > +	exynos_crtc->enabled = true;
> >  
> > -	if (mode == DRM_MODE_DPMS_ON)
> > -		drm_crtc_vblank_on(crtc);
> > -}
> > +	drm_crtc_vblank_on(crtc);
> >  
> > -static void exynos_drm_crtc_prepare(struct drm_crtc *crtc)
> > -{
> > -	/* drm framework doesn't check NULL. */
> > +	if (exynos_crtc->ops->win_commit)
> > +		exynos_crtc->ops->win_commit(exynos_crtc, exynos_plane->zpos);
> > +
> > +	if (exynos_crtc->ops->commit)
> > +		exynos_crtc->ops->commit(exynos_crtc);
> 
> crtc commit already was called by mode_set_nofb callback as soon as it
> disables crtc and encoder devices so I think unnecessary. Please see the
> drm_atomic_helper_commit_modeset_disable function.

This is already gone for v7, see my comments on
[PATCH v6 03/12] drm/exynos: atomic phase 1: add .mode_set_nofb() callback

	Gustavo
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux