Hi Dave, Can you help me review this patch please? Thanks. Jianwei > -----Original Message----- > From: Wang Jianwei-B52261 > Sent: Thursday, May 07, 2015 2:29 PM > To: Wang Jianwei-B52261; airlied@xxxxxxxx; daniel.vetter@xxxxxxxxx; > stefan@xxxxxxxx; Wood Scott-B07421; dri-devel@xxxxxxxxxxxxxxxxxxxxx > Cc: linux-kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; > Jin Zhengxiong-R64188; Wang Huan-B18965; Xiubo Li > Subject: RE: [PATCH v5 1/3] drm/layerscape: Add Freescale DCU DRM driver > > Hi Dave, > > Can you help me to review this patch? Thanks. > > Jianwei > > > -----Original Message----- > > From: Jianwei Wang [mailto:jianwei.wang@xxxxxxxxxxxxx] > > Sent: Friday, April 17, 2015 2:36 PM > > To: airlied@xxxxxxxx; daniel.vetter@xxxxxxxxx; stefan@xxxxxxxx; Wood > > Scott-B07421; dri-devel@xxxxxxxxxxxxxxxxxxxxx > > Cc: linux-kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; > > Jin Zhengxiong-R64188; Wang Jianwei-B52261; Wang Huan-B18965; Xiubo Li; > > Wang Jianwei-B52261 > > Subject: [PATCH v5 1/3] drm/layerscape: Add Freescale DCU DRM driver > > > > From: Jianwei Wang <b52261@xxxxxxxxxxxxx> > > > > This patch add support for Two Dimensional Animation and Compositing > > Engine (2D-ACE) on the Freescale SoCs. > > > > 2D-ACE is a Freescale display controller. 2D-ACE describes the > > functionality of the module extremely well its name is a value that > cannot > > be used as a token in programming languages. > > Instead the valid token "DCU" is used to tag the register names and > > function names. > > > > The Display Controller Unit (DCU) module is a system master that fetches > > graphics stored in internal or external memory and displays them on a > TFT > > LCD panel. A wide range of panel sizes is supported and the timing of > the > > interface signals is highly configurable. > > Graphics are read directly from memory and then blended in real-time, > > which allows for dynamic content creation with minimal CPU intervention. > > > > The features: > > (1) Full RGB888 output to TFT LCD panel. > > (2) For the current LCD panel, WQVGA "480x272" is supported. > > (3) Blending of each pixel using up to 4 source layers dependent on size > > of panel. > > (4) Each graphic layer can be placed with one pixel resolution in either > > axis. > > (5) Each graphic layer support RGB565 and RGB888 direct colors without > > alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha > > channel and YUV422 format. > > (6) Each graphic layer support alpha blending with 8-bit resolution. > > > > This is a simplified version, only one primary plane, one framebuffer > > created for fbdev, one crtc, one connector for TFT LCD panel, an encoder. > > > > Signed-off-by: Alison Wang <b18965@xxxxxxxxxxxxx> > > Signed-off-by: Xiubo Li <lixiubo@xxxxxxxxxxxxxxxxxxxx> > > Signed-off-by: Jianwei Wang <jianwei.wang@xxxxxxxxxxxxx> > > --- > > > > Changed in V5 > > > > - Update commit message > > - Add layer registers initialization > > - Remove unused functions > > - Rename driver folder > > - Move pixel clock control functions to fsl_dcu_drm_drv.c > > - remove redundant enable the clock implicitly using regmap > > - Add maintainer message > > > > Changed in V4: > > > > -This version doesn't have functionality changed Just a minor > adjustment. > > > > Changed in V3: > > > > - Test driver on Vybrid board and add compatible string > > - Remove unused functions > > - set default crtc for encoder > > - replace legacy functions with atomic help functions > > - Set the unique name of the DRM device > > - Implement irq handle function for vblank interrupt > > > > Changed in v2: > > - Add atomic support > > - Modify bindings file > > - Rename node for compatibility > > - Move platform related code out for compatibility > > > > .../devicetree/bindings/drm/fsl-dcu/fsl,dcu.txt | 50 +++ > > MAINTAINERS | 8 + > > drivers/gpu/drm/Kconfig | 2 + > > drivers/gpu/drm/Makefile | 1 + > > drivers/gpu/drm/fsl-dcu/Kconfig | 17 + > > drivers/gpu/drm/fsl-dcu/Makefile | 7 + > > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_connector.c | 194 +++++++++++ > > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_connector.h | 30 ++ > > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c | 172 ++++++++++ > > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.h | 22 ++ > > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c | 373 > > +++++++++++++++++++++ > > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h | 223 ++++++++++++ > > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c | 26 ++ > > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c | 42 +++ > > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.h | 17 + > > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c | 192 +++++++++++ > > drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h | 23 ++ > > 17 files changed, 1399 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/drm/fsl- > > dcu/fsl,dcu.txt > > create mode 100644 drivers/gpu/drm/fsl-dcu/Kconfig create mode 100644 > > drivers/gpu/drm/fsl-dcu/Makefile create mode 100644 > drivers/gpu/drm/fsl- > > dcu/fsl_dcu_drm_connector.c > > create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_connector.h > > create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c > > create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.h > > create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c > > create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h > > create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c > > create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c > > create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.h > > create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c > > create mode 100644 drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h > > > > diff --git a/Documentation/devicetree/bindings/drm/fsl-dcu/fsl,dcu.txt > > b/Documentation/devicetree/bindings/drm/fsl-dcu/fsl,dcu.txt > > new file mode 100644 > > index 0000000..bdc7d5b > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/drm/fsl-dcu/fsl,dcu.txt > > @@ -0,0 +1,49 @@ > > +Device Tree bindings for Freescale DCU DRM Driver > > + > > +Required properties: > > +- compatible: Should be one of > > + * "fsl,ls1021a-dcu". > > + * "fsl,vf610-dcu". > > +- reg: Address and length of the register set for dcu. > > +- clocks: From common clock binding: handle to dcu clock. > > +- clock-names: From common clock binding: Shall be "dcu". > > +- display: The phandle to display node. > > + > > +Required properties: > > +- bits-per-pixel: <16> for RGB565, > > + <24> for RGB888, > > + <32> for RGB8888. > > + > > +Required timing node for dispplay sub-node: > > +- display-timings: Refer to binding doc display-timing.txt for > > details. > > + > > +Examples: > > +dcu: dcu@2ce0000 { > > + compatible = "fsl,ls1021a-dcu"; > > + reg = <0x0 0x2ce0000 0x0 0x10000>; > > + clocks = <&platform_clk 0>; > > + clock-names = "dcu"; > > + big-endian; > > + display = <&display>; > > + > > + display: display@0 { > > + bits-per-pixel = <24>; > > + > > + display-timings { > > + native-mode = <&timing0>; > > + timing0: nl4827hc19 { > > + clock-frequency = <10870000>; > > + hactive = <480>; > > + vactive = <272>; > > + hback-porch = <2>; > > + hfront-porch = <2>; > > + vback-porch = <1>; > > + vfront-porch = <1>; > > + hsync-len = <41>; > > + vsync-len = <2>; > > + hsync-active = <1>; > > + vsync-active = <1>; > > + }; > > + }; > > + }; > > +}; > > diff --git a/MAINTAINERS b/MAINTAINERS > > index 885be14..a6cff2f4 100644 > > --- a/MAINTAINERS > > +++ b/MAINTAINERS > > @@ -3398,6 +3398,14 @@ S: Maintained > > F: drivers/gpu/drm/imx/ > > F: Documentation/devicetree/bindings/drm/imx/ > > > > +DRM DRIVERS FOR FREESCALE DCU > > +M: Jianwei Wang <jianwei.wang@xxxxxxxxxxxxx> > > +M: Alison Wang <alison.wang@xxxxxxxxxxxxx> > > +L: dri-devel@xxxxxxxxxxxxxxxxxxxxx > > +S: Supported > > +F: drivers/gpu/drm/fsl-dcu/ > > +F: Documentation/devicetree/bindings/drm/fsl-dcu/ > > + > > DRM DRIVERS FOR NVIDIA TEGRA > > M: Thierry Reding <thierry.reding@xxxxxxxxx> > > M: Terje Bergström <tbergstrom@xxxxxxxxxx> > > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig index > > 151a050..e64cf18 100644 > > --- a/drivers/gpu/drm/Kconfig > > +++ b/drivers/gpu/drm/Kconfig > > @@ -199,6 +199,8 @@ source "drivers/gpu/drm/bochs/Kconfig" > > > > source "drivers/gpu/drm/msm/Kconfig" > > > > +source "drivers/gpu/drm/fsl-dcu/Kconfig" > > + > > source "drivers/gpu/drm/tegra/Kconfig" > > > > source "drivers/gpu/drm/panel/Kconfig" > > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index > > 2c239b9..398eccf 100644 > > --- a/drivers/gpu/drm/Makefile > > +++ b/drivers/gpu/drm/Makefile > > @@ -56,6 +56,7 @@ obj-$(CONFIG_DRM_UDL) += udl/ > > obj-$(CONFIG_DRM_AST) += ast/ > > obj-$(CONFIG_DRM_ARMADA) += armada/ > > obj-$(CONFIG_DRM_ATMEL_HLCDC) += atmel-hlcdc/ > > +obj-$(CONFIG_DRM_FSL_DCU) += fsl-dcu/ > > obj-$(CONFIG_DRM_RCAR_DU) += rcar-du/ > > obj-$(CONFIG_DRM_SHMOBILE) +=shmobile/ > > obj-$(CONFIG_DRM_OMAP) += omapdrm/ > > diff --git a/drivers/gpu/drm/fsl-dcu/Kconfig b/drivers/gpu/drm/fsl- > > dcu/Kconfig new file mode 100644 index 0000000..e4f8df0 > > --- /dev/null > > +++ b/drivers/gpu/drm/fsl-dcu/Kconfig > > @@ -0,0 +1,17 @@ > > +config DRM_FSL_DCU > > + tristate "DRM Support for Freescale DCU" > > + depends on DRM && OF && ARM > > + select DRM_KMS_HELPER > > + select DRM_KMS_CMA_HELPER > > + select VIDEOMODE_HELPERS > > + select BACKLIGHT_CLASS_DEVICE > > + select BACKLIGHT_LCD_SUPPORT > > + select REGMAP_MMIO > > + select DRM_KMS_FB_HELPER > > + select FB_SYS_FILLRECT > > + select FB_SYS_COPYAREA > > + select FB_SYS_IMAGEBLIT > > + select FB_SYS_FOPS > > + help > > + Choose this option if you have an Freescale DCU chipset. > > + If M is selected the module will be called fsl-dcu-drm. > > diff --git a/drivers/gpu/drm/fsl-dcu/Makefile b/drivers/gpu/drm/fsl- > > dcu/Makefile > > new file mode 100644 > > index 0000000..336b4a6 > > --- /dev/null > > +++ b/drivers/gpu/drm/fsl-dcu/Makefile > > @@ -0,0 +1,7 @@ > > +fsl-dcu-drm-y := fsl_dcu_drm_drv.o \ > > + fsl_dcu_drm_kms.o \ > > + fsl_dcu_drm_connector.o \ > > + fsl_dcu_drm_plane.o \ > > + fsl_dcu_drm_crtc.o \ > > + fsl_dcu_drm_fbdev.o > > +obj-$(CONFIG_DRM_FSL_DCU) += fsl-dcu-drm.o > > diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_connector.c > > b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_connector.c > > new file mode 100644 > > index 0000000..799682d > > --- /dev/null > > +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_connector.c > > @@ -0,0 +1,194 @@ > > +/* > > + * Copyright 2015 Freescale Semiconductor, Inc. > > + * > > + * Freescale DCU drm device driver > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; either version 2 of the License, or > > + * (at your option) any later version. > > + */ > > + > > +#include <linux/backlight.h> > > + > > +#include <drm/drmP.h> > > +#include <drm/drm_atomic_helper.h> > > +#include <video/of_display_timing.h> > > + > > +#include "fsl_dcu_drm_drv.h" > > +#include "fsl_dcu_drm_connector.h" > > + > > +static void fsl_dcu_drm_encoder_dpms(struct drm_encoder *encoder, int > > +mode) { } > > + > > +static void fsl_dcu_drm_encoder_mode_prepare(struct drm_encoder > > +*encoder) { } > > + > > +static void fsl_dcu_drm_encoder_mode_set(struct drm_encoder *encoder, > > + struct drm_display_mode *mode, > > + struct drm_display_mode *adjusted_mode) { } > > + > > +static void fsl_dcu_drm_encoder_mode_commit(struct drm_encoder > > +*encoder) { } > > + > > +static void fsl_dcu_drm_encoder_disable(struct drm_encoder *encoder) { > > +} > > + > > +static int > > +fsl_dcu_drm_encoder_atomic_check(struct drm_encoder *encoder, > > + struct drm_crtc_state *crtc_state, > > + struct drm_connector_state *conn_state) { > > + return 0; > > +} > > + > > +static void fsl_dcu_drm_encoder_destroy(struct drm_encoder *encoder) { > > + drm_encoder_cleanup(encoder); > > +} > > + > > +static const struct drm_encoder_helper_funcs encoder_helper_funcs = { > > + .dpms = fsl_dcu_drm_encoder_dpms, > > + .prepare = fsl_dcu_drm_encoder_mode_prepare, > > + .commit = fsl_dcu_drm_encoder_mode_commit, > > + .mode_set = fsl_dcu_drm_encoder_mode_set, > > + .disable = fsl_dcu_drm_encoder_disable, > > + .atomic_check = fsl_dcu_drm_encoder_atomic_check, }; > > + > > +static const struct drm_encoder_funcs encoder_funcs = { > > + .destroy = fsl_dcu_drm_encoder_destroy, }; > > + > > +int fsl_dcu_drm_encoder_create(struct fsl_dcu_drm_device *fsl_dev, > > + struct drm_crtc *crtc) > > +{ > > + struct drm_encoder *encoder = &fsl_dev->encoder; > > + int ret; > > + > > + encoder->possible_crtcs = 1; > > + ret = drm_encoder_init(fsl_dev->ddev, encoder, &encoder_funcs, > > + DRM_MODE_ENCODER_LVDS); > > + if (ret < 0) > > + return ret; > > + > > + drm_encoder_helper_add(encoder, &encoder_helper_funcs); > > + encoder->crtc = crtc; > > + > > + return 0; > > +} > > + > > +#define to_fsl_dcu_connector(connector) \ > > + container_of(connector, struct fsl_dcu_drm_connector, connector) > > + > > +static int fsl_dcu_drm_connector_get_modes(struct drm_connector > > +*connector) { > > + struct drm_device *dev = connector->dev; > > + struct device_node *display_np, *np = dev->dev->of_node; > > + struct drm_display_mode *mode = drm_mode_create(connector->dev); > > + int num_modes = 0; > > + > > + if (np) { > > + display_np = of_parse_phandle(np, "display", 0); > > + if (!display_np) { > > + dev_err(dev->dev, "failed to find display phandle\n"); > > + return num_modes; > > + } > > + of_get_drm_display_mode(display_np, mode, OF_USE_NATIVE_MODE); > > + mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, > > + drm_mode_probed_add(connector, mode); > > + num_modes++; > > + } > > + > > + return num_modes; > > +} > > + > > +static int fsl_dcu_drm_connector_mode_valid(struct drm_connector > > *connector, > > + struct drm_display_mode *mode) { > > + return MODE_OK; > > +} > > + > > +static struct drm_encoder * > > +fsl_dcu_drm_connector_best_encoder(struct drm_connector *connector) { > > + struct fsl_dcu_drm_connector *fsl_con = > > +to_fsl_dcu_connector(connector); > > + > > + return fsl_con->encoder; > > +} > > + > > +static void fsl_dcu_drm_connector_destroy(struct drm_connector > > +*connector) { > > + drm_connector_unregister(connector); > > + drm_connector_cleanup(connector); > > +} > > + > > +static enum drm_connector_status > > +fsl_dcu_drm_connector_detect(struct drm_connector *connector, bool > > +force) { > > + return connector_status_connected; > > +} > > + > > +static const struct drm_connector_funcs fsl_dcu_drm_connector_funcs = { > > + .dpms = drm_atomic_helper_connector_dpms, > > + .reset = drm_atomic_helper_connector_reset, > > + .detect = fsl_dcu_drm_connector_detect, > > + .fill_modes = drm_helper_probe_single_connector_modes, > > + .destroy = fsl_dcu_drm_connector_destroy, > > + .atomic_duplicate_state = > > drm_atomic_helper_connector_duplicate_state, > > + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, > > +}; > > + > > +static const struct drm_connector_helper_funcs connector_helper_funcs = > { > > + .get_modes = fsl_dcu_drm_connector_get_modes, > > + .mode_valid = fsl_dcu_drm_connector_mode_valid, > > + .best_encoder = fsl_dcu_drm_connector_best_encoder, > > +}; > > + > > +int fsl_dcu_drm_connector_create(struct fsl_dcu_drm_device *fsl_dev, > > + struct drm_encoder *encoder) > > +{ > > + struct drm_connector *connector = &fsl_dev->connector.connector; > > + int ret; > > + > > + fsl_dev->connector.encoder = encoder; > > + > > + connector->display_info.width_mm = 0; > > + connector->display_info.height_mm = 0; > > + > > + ret = drm_connector_init(fsl_dev->ddev, connector, > > + &fsl_dcu_drm_connector_funcs, > > + DRM_MODE_CONNECTOR_LVDS); > > + if (ret < 0) > > + return ret; > > + > > + connector->dpms = DRM_MODE_DPMS_OFF; > > + drm_connector_helper_add(connector, &connector_helper_funcs); > > + ret = drm_connector_register(connector); > > + if (ret < 0) > > + goto err_cleanup; > > + > > + ret = drm_mode_connector_attach_encoder(connector, encoder); > > + if (ret < 0) > > + goto err_sysfs; > > + > > + connector->encoder = encoder; > > + > > + drm_object_property_set_value > > + (&connector->base, fsl_dev->ddev->mode_config.dpms_property, > > + DRM_MODE_DPMS_OFF); > > + > > + return 0; > > + > > +err_sysfs: > > + drm_connector_unregister(connector); > > +err_cleanup: > > + drm_connector_cleanup(connector); > > + return ret; > > +} > > diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_connector.h > > b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_connector.h > > new file mode 100644 > > index 0000000..8141a29 > > --- /dev/null > > +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_connector.h > > @@ -0,0 +1,30 @@ > > +/* > > + * Copyright 2015 Freescale Semiconductor, Inc. > > + * > > + * Freescale DCU drm device driver > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; either version 2 of the License, or > > + * (at your option) any later version. > > + */ > > + > > +#ifndef __FSL_DCU_DRM_CONNECTOR_H__ > > +#define __FSL_DCU_DRM_CONNECTOR_H__ > > + > > +#include <drm/drmP.h> > > +#include <drm/drm_crtc.h> > > +#include "fsl_dcu_drm_crtc.h" > > + > > +struct fsl_dcu_drm_device; > > +struct fsl_dcu_drm_connector { > > + struct drm_connector connector; > > + struct drm_encoder *encoder; > > +}; > > + > > +int fsl_dcu_drm_encoder_create(struct fsl_dcu_drm_device *fsl_dev, > > + struct drm_crtc *crtc); > > +int fsl_dcu_drm_connector_create(struct fsl_dcu_drm_device *fsl_dev, > > + struct drm_encoder *encoder); > > + > > +#endif /* __FSL_DCU_DRM_CONNECTOR_H__ */ > > diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c > > b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c > > new file mode 100644 > > index 0000000..4065a7c > > --- /dev/null > > +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.c > > @@ -0,0 +1,172 @@ > > +/* > > + * Copyright 2015 Freescale Semiconductor, Inc. > > + * > > + * Freescale DCU drm device driver > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; either version 2 of the License, or > > + * (at your option) any later version. > > + */ > > + > > +#include <linux/regmap.h> > > +#include <linux/clk.h> > > + > > +#include <drm/drmP.h> > > +#include <drm/drm_atomic.h> > > +#include <drm/drm_atomic_helper.h> > > +#include <drm/drm_crtc.h> > > + > > +#include "fsl_dcu_drm_crtc.h" > > +#include "fsl_dcu_drm_drv.h" > > +#include "fsl_dcu_drm_plane.h" > > + > > +#define to_fsl_dcu_crtc(c) container_of(c, struct fsl_dcu_drm_crtc, > > crtc) > > + > > +static void fsl_dcu_drm_crtc_mode_set_nofb(struct drm_crtc *crtc) { > > + struct drm_device *dev = crtc->dev; > > + struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; > > + struct drm_display_mode *mode = &crtc->state->mode; > > + uint32_t hbp, hfp, hsw, vbp, vfp, vsw, div, index; > > + > > + DBG(": set mode: %d:\"%s\" %d %d %d %d %d %d %d %d %d %d 0x%x 0x%x", > > + mode->base.id, mode->name, > > + mode->vrefresh, mode->clock, > > + mode->hdisplay, mode->hsync_start, > > + mode->hsync_end, mode->htotal, > > + mode->vdisplay, mode->vsync_start, > > + mode->vsync_end, mode->vtotal, > > + mode->type, mode->flags); > > + > > + index = drm_crtc_index(crtc); > > + div = (uint32_t)clk_get_rate(fsl_dev->clk) / mode->clock / 1000; > > + > > + /* Configure timings: */ > > + hbp = mode->htotal - mode->hsync_end; > > + hfp = mode->hsync_start - mode->hdisplay; > > + hsw = mode->hsync_end - mode->hsync_start; > > + vbp = mode->vtotal - mode->vsync_end; > > + vfp = mode->vsync_start - mode->vdisplay; > > + vsw = mode->vsync_end - mode->vsync_start; > > + > > + regmap_write(fsl_dev->regmap, DCU_HSYN_PARA, > > + DCU_HSYN_PARA_BP(hbp) | > > + DCU_HSYN_PARA_PW(hsw) | > > + DCU_HSYN_PARA_FP(hfp)); > > + regmap_write(fsl_dev->regmap, DCU_VSYN_PARA, > > + DCU_VSYN_PARA_BP(vbp) | > > + DCU_VSYN_PARA_PW(vsw) | > > + DCU_VSYN_PARA_FP(vfp)); > > + regmap_write(fsl_dev->regmap, DCU_DISP_SIZE, > > + DCU_DISP_SIZE_DELTA_Y(mode->vdisplay) | > > + DCU_DISP_SIZE_DELTA_X(mode->hdisplay)); > > + regmap_write(fsl_dev->regmap, DCU_DIV_RATIO, div); > > + regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE, > > +DCU_UPDATE_MODE_READREG); } > > + > > +static bool fsl_dcu_drm_crtc_mode_fixup(struct drm_crtc *crtc, > > + const struct drm_display_mode *mode, > > + struct drm_display_mode *adjusted_mode) { > > + return true; > > +} > > + > > +static void fsl_dcu_drm_crtc_prepare(struct drm_crtc *crtc) { } > > + > > +/* Now enable the clocks, plane, pipe, and connectors that we set up. > > +*/ static void fsl_dcu_drm_crtc_mode_commit(struct drm_crtc *crtc) { } > > + > > +static int fsl_dcu_drm_crtc_atomic_check(struct drm_crtc *crtc, > > + struct drm_crtc_state *state) > > +{ > > + return 0; > > +} > > + > > +static void fsl_dcu_drm_crtc_atomic_begin(struct drm_crtc *crtc) { } > > + > > +static void fsl_dcu_drm_crtc_atomic_flush(struct drm_crtc *crtc) { } > > + > > +static void fsl_dcu_drm_disable_crtc(struct drm_crtc *crtc) { } > > + > > +static void fsl_dcu_drm_crtc_dpms(struct drm_crtc *crtc, int mode) { } > > + > > +static const struct drm_crtc_funcs fsl_dcu_drm_crtc_funcs = { > > + .page_flip = drm_atomic_helper_page_flip, > > + .set_config = drm_atomic_helper_set_config, > > + .destroy = drm_crtc_cleanup, > > + .reset = drm_atomic_helper_crtc_reset, > > + .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state, > > + .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state, > > +}; > > + > > +static const struct drm_crtc_helper_funcs fsl_dcu_drm_crtc_helper_funcs > = > > { > > + .disable = fsl_dcu_drm_disable_crtc, > > + .mode_fixup = fsl_dcu_drm_crtc_mode_fixup, > > + .mode_set = drm_helper_crtc_mode_set, > > + .mode_set_nofb = fsl_dcu_drm_crtc_mode_set_nofb, > > + .mode_set_base = drm_helper_crtc_mode_set_base, > > + .prepare = fsl_dcu_drm_crtc_prepare, > > + .commit = fsl_dcu_drm_crtc_mode_commit, > > + .atomic_check = fsl_dcu_drm_crtc_atomic_check, > > + .atomic_begin = fsl_dcu_drm_crtc_atomic_begin, > > + .atomic_flush = fsl_dcu_drm_crtc_atomic_flush, > > + .dpms = fsl_dcu_drm_crtc_dpms, > > +}; > > + > > +int fsl_dcu_drm_crtc_create(struct fsl_dcu_drm_device *fsl_dev) { > > + struct drm_plane *primary; > > + struct drm_crtc *crtc = &fsl_dev->crtc; > > + int i, ret; > > + > > + primary = fsl_dcu_drm_primary_create_plane(fsl_dev->ddev); > > + ret = drm_crtc_init_with_planes(fsl_dev->ddev, crtc, primary, NULL, > > + &fsl_dcu_drm_crtc_funcs); > > + if (ret < 0) > > + return ret; > > + > > + drm_crtc_helper_add(crtc, &fsl_dcu_drm_crtc_helper_funcs); > > + > > + for (i = 0; i < DCU_TOTAL_LAYER_NUM; i++) { > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_1(i), 0); > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_2(i), 0); > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_3(i), 0); > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_4(i), 0); > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_5(i), 0); > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_6(i), 0); > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_7(i), 0); > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_8(i), 0); > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_9(i), 0); > > + if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu")) > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_10(i), 0); > > + } > > + regmap_write(fsl_dev->regmap, DCU_SYN_POL, > > + DCU_SYN_POL_INV_VS_LOW | DCU_SYN_POL_INV_HS_LOW); > > + regmap_write(fsl_dev->regmap, DCU_BGND, DCU_BGND_R(0) | > > + DCU_BGND_G(0) | DCU_BGND_B(0)); > > + regmap_write(fsl_dev->regmap, DCU_DCU_MODE, > > + DCU_MODE_BLEND_ITER(1) | DCU_MODE_RASTER_EN); > > + regmap_write(fsl_dev->regmap, DCU_THRESHOLD, > > + DCU_THRESHOLD_LS_BF_VS(BF_VS_VAL) | > > + DCU_THRESHOLD_OUT_BUF_HIGH(BUF_MAX_VAL) | > > + DCU_THRESHOLD_OUT_BUF_LOW(BUF_MIN_VAL)); > > + regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE, > > + DCU_MODE_DCU_MODE_MASK, > > + DCU_MODE_DCU_MODE(DCU_MODE_OFF)); > > + regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE, > > +DCU_UPDATE_MODE_READREG); > > + > > + return 0; > > +} > > diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.h > > b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.h > > new file mode 100644 > > index 0000000..193785f > > --- /dev/null > > +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_crtc.h > > @@ -0,0 +1,22 @@ > > +/* > > + * Copyright 2015 Freescale Semiconductor, Inc. > > + * > > + * Freescale DCU drm device driver > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; either version 2 of the License, or > > + * (at your option) any later version. > > + */ > > + > > +#ifndef __FSL_DCU_DRM_CRTC_H__ > > +#define __FSL_DCU_DRM_CRTC_H__ > > + > > +#include <drm/drmP.h> > > +#include <drm/drm_crtc.h> > > + > > +struct fsl_dcu_drm_device; > > + > > +int fsl_dcu_drm_crtc_create(struct fsl_dcu_drm_device *fsl_dev); > > + > > +#endif /* __FSL_DCU_DRM_CRTC_H__ */ > > diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c > > b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c > > new file mode 100644 > > index 0000000..1edf7be > > --- /dev/null > > +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.c > > @@ -0,0 +1,373 @@ > > +/* > > + * Copyright 2015 Freescale Semiconductor, Inc. > > + * > > + * Freescale DCU drm device driver > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; either version 2 of the License, or > > + * (at your option) any later version. > > + */ > > + > > +#include <linux/clk.h> > > +#include <linux/io.h> > > +#include <linux/mm.h> > > +#include <linux/module.h> > > +#include <linux/of_platform.h> > > +#include <linux/platform_device.h> > > +#include <linux/pm.h> > > +#include <linux/pm_runtime.h> > > +#include <linux/regmap.h> > > +#include <linux/mfd/syscon.h> > > + > > +#include <drm/drmP.h> > > + > > +#include "fsl_dcu_drm_drv.h" > > +#include "fsl_dcu_drm_crtc.h" > > +#include "fsl_dcu_drm_kms.h" > > + > > +static int fsl_dcu_unload(struct drm_device *dev) { > > + drm_mode_config_cleanup(dev); > > + drm_vblank_cleanup(dev); > > + drm_irq_uninstall(dev); > > + > > + dev->dev_private = NULL; > > + > > + return 0; > > +} > > + > > +static struct regmap_config fsl_dcu_regmap_config = { > > + .reg_bits = 32, > > + .reg_stride = 4, > > + .val_bits = 32, > > +}; > > + > > +static int fsl_dcu_bypass_tcon(struct fsl_dcu_drm_device *fsl_dev, > > + struct device_node *np) > > +{ > > + struct device_node *tcon_np; > > + struct platform_device *pdev; > > + struct clk *tcon_clk; > > + struct resource *res; > > + void __iomem *base; > > + > > + tcon_np = of_parse_phandle(np, "tcon-controller", 0); > > + if (!tcon_np) > > + return -EINVAL; > > + > > + pdev = of_find_device_by_node(tcon_np); > > + if (!pdev) > > + return -EINVAL; > > + > > + tcon_clk = devm_clk_get(&pdev->dev, "tcon"); > > + if (IS_ERR(tcon_clk)) > > + return PTR_ERR(tcon_clk); > > + clk_prepare_enable(tcon_clk); > > + > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > + if (!res) > > + return -ENODEV; > > + > > + base = devm_ioremap_resource(&pdev->dev, res); > > + if (IS_ERR(base)) > > + return PTR_ERR(base); > > + > > + fsl_dev->tcon_regmap = devm_regmap_init_mmio(&pdev->dev, > > + base, &fsl_dcu_regmap_config); > > + if (IS_ERR(fsl_dev->tcon_regmap)) { > > + dev_err(&pdev->dev, "regmap init failed\n"); > > + return PTR_ERR(fsl_dev->tcon_regmap); > > + } > > + > > + regmap_write(fsl_dev->tcon_regmap, TCON_CTRL1, TCON_BYPASS_ENABLE); > > + return 0; > > +} > > + > > +static void dcu_pixclk_enable(void) > > +{ > > + struct regmap *scfg_regmap; > > + > > + scfg_regmap = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg"); > > + if (IS_ERR(scfg_regmap)) { > > + pr_err("No syscfg phandle specified\n"); > > + return; > > + } > > + > > + regmap_write(scfg_regmap, SCFG_PIXCLKCR, PXCK_ENABLE); } > > + > > +static int fsl_dcu_drm_irq_init(struct drm_device *dev) { > > + struct platform_device *pdev = dev->platformdev; > > + struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; > > + unsigned int int_mask; > > + int ret; > > + > > + ret = drm_irq_install(dev, platform_get_irq(dev->platformdev, 0)); > > + if (ret < 0) > > + dev_err(&pdev->dev, "failed to install IRQ handler\n"); > > + > > + dev->irq_enabled = true; > > + dev->vblank_disable_allowed = true; > > + > > + regmap_write(fsl_dev->regmap, DCU_INT_STATUS, 0); > > + regmap_read(fsl_dev->regmap, DCU_INT_MASK, &int_mask); > > + regmap_write(fsl_dev->regmap, DCU_INT_MASK, int_mask & > > + ~DCU_INT_MASK_VBLANK); > > + regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE, > > +DCU_UPDATE_MODE_READREG); > > + > > + return 0; > > +} > > + > > +static int fsl_dcu_load(struct drm_device *dev, unsigned long flags) { > > + struct platform_device *pdev = dev->platformdev; > > + struct fsl_dcu_drm_device *fsl_dev; > > + struct resource *res; > > + void __iomem *base; > > + int ret; > > + > > + fsl_dev = devm_kzalloc(&pdev->dev, sizeof(*fsl_dev), GFP_KERNEL); > > + if (!fsl_dev) > > + return -ENOMEM; > > + > > + fsl_dev->dev = &pdev->dev; > > + fsl_dev->ddev = dev; > > + fsl_dev->np = pdev->dev.of_node; > > + dev->dev_private = fsl_dev; > > + dev_set_drvdata(dev->dev, fsl_dev); > > + drm_dev_set_unique(dev, dev_name(dev->dev)); > > + > > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > > + if (!res) { > > + dev_err(&pdev->dev, "could not get memory IO resource\n"); > > + return -ENODEV; > > + } > > + > > + base = devm_ioremap_resource(&pdev->dev, res); > > + if (IS_ERR(base)) { > > + ret = PTR_ERR(base); > > + return ret; > > + } > > + > > + fsl_dev->clk = devm_clk_get(&pdev->dev, "dcu"); > > + if (IS_ERR(fsl_dev->clk)) { > > + ret = PTR_ERR(fsl_dev->clk); > > + dev_err(&pdev->dev, "could not get clock\n"); > > + return ret; > > + } > > + clk_prepare_enable(fsl_dev->clk); > > + fsl_dev->regmap = devm_regmap_init_mmio(&pdev->dev, base, > > + &fsl_dcu_regmap_config); > > + if (IS_ERR(fsl_dev->regmap)) { > > + dev_err(&pdev->dev, "regmap init failed\n"); > > + return PTR_ERR(fsl_dev->regmap); > > + } > > + > > + /* Put TCON in bypass mode, so the input signals from DCU are passed > > + * through TCON unchanged */ > > + fsl_dcu_bypass_tcon(fsl_dev, fsl_dev->np); > > + > > + if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu")) > > + dcu_pixclk_enable(); > > + ret = fsl_dcu_drm_modeset_init(fsl_dev); > > + if (ret < 0) { > > + dev_err(&pdev->dev, "failed to initialize mode setting\n"); > > + return ret; > > + } > > + > > + ret = drm_vblank_init(dev, dev->mode_config.num_crtc); > > + if (ret < 0) { > > + dev_err(&pdev->dev, "failed to initialize vblank\n"); > > + goto done; > > + } > > + > > + ret = fsl_dcu_drm_irq_init(dev); > > + if (ret < 0) > > + goto done; > > + > > + fsl_dcu_fbdev_init(dev); > > + > > + return 0; > > +done: > > + if (ret) > > + fsl_dcu_unload(dev); > > + > > + return ret; > > +} > > + > > +static void fsl_dcu_drm_preclose(struct drm_device *dev, struct > > +drm_file *file) { } > > + > > +static irqreturn_t fsl_dcu_drm_irq(int irq, void *arg) { > > + struct drm_device *dev = arg; > > + struct fsl_dcu_drm_device *fsl_dev = dev->dev_private; > > + unsigned int int_status; > > + > > + regmap_read(fsl_dev->regmap, DCU_INT_STATUS, &int_status); > > + if (int_status & DCU_INT_STATUS_VBLANK) > > + drm_handle_vblank(dev, 0); > > + > > + regmap_write(fsl_dev->regmap, DCU_INT_STATUS, 0xffffffff); > > + regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE, > > +DCU_UPDATE_MODE_READREG); > > + > > + return IRQ_HANDLED; > > +} > > + > > +static int fsl_dcu_drm_enable_vblank(struct drm_device *dev, int crtc) > > +{ > > + return 0; > > +} > > + > > +static void fsl_dcu_drm_disable_vblank(struct drm_device *dev, int > > +crtc) { } > > + > > +static const struct file_operations fsl_dcu_drm_fops = { > > + .owner = THIS_MODULE, > > + .open = drm_open, > > + .release = drm_release, > > + .unlocked_ioctl = drm_ioctl, > > +#ifdef CONFIG_COMPAT > > + .compat_ioctl = drm_compat_ioctl, > > +#endif > > + .poll = drm_poll, > > + .read = drm_read, > > + .llseek = no_llseek, > > + .mmap = drm_gem_cma_mmap, > > +}; > > + > > +static struct drm_driver fsl_dcu_drm_driver = { > > + .driver_features = DRIVER_HAVE_IRQ | DRIVER_GEM | DRIVER_MODESET > > + | DRIVER_PRIME, > > + .load = fsl_dcu_load, > > + .unload = fsl_dcu_unload, > > + .preclose = fsl_dcu_drm_preclose, > > + .irq_handler = fsl_dcu_drm_irq, > > + .get_vblank_counter = drm_vblank_count, > > + .enable_vblank = fsl_dcu_drm_enable_vblank, > > + .disable_vblank = fsl_dcu_drm_disable_vblank, > > + .gem_free_object = drm_gem_cma_free_object, > > + .gem_vm_ops = &drm_gem_cma_vm_ops, > > + .prime_handle_to_fd = drm_gem_prime_handle_to_fd, > > + .prime_fd_to_handle = drm_gem_prime_fd_to_handle, > > + .gem_prime_import = drm_gem_prime_import, > > + .gem_prime_export = drm_gem_prime_export, > > + .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table, > > + .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table, > > + .gem_prime_vmap = drm_gem_cma_prime_vmap, > > + .gem_prime_vunmap = drm_gem_cma_prime_vunmap, > > + .gem_prime_mmap = drm_gem_cma_prime_mmap, > > + .dumb_create = drm_gem_cma_dumb_create, > > + .dumb_map_offset = drm_gem_cma_dumb_map_offset, > > + .dumb_destroy = drm_gem_dumb_destroy, > > + .fops = &fsl_dcu_drm_fops, > > + .name = "fsl-dcu-drm", > > + .desc = "Freescale DCU DRM", > > + .date = "20150213", > > + .major = 1, > > + .minor = 0, > > +}; > > + > > +#ifdef CONFIG_PM_SLEEP > > +static void dcu_pixclk_disable(void) > > +{ > > + struct regmap *scfg_regmap; > > + > > + scfg_regmap = syscon_regmap_lookup_by_compatible("fsl,ls1021a-scfg"); > > + if (IS_ERR(scfg_regmap)) { > > + pr_err("No syscfg phandle specified\n"); > > + return; > > + } > > + > > + regmap_write(scfg_regmap, SCFG_PIXCLKCR, PXCK_DISABLE); } > > + > > +static int fsl_dcu_drm_pm_suspend(struct device *dev) { > > + struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev); > > + > > + if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu")) > > + dcu_pixclk_disable(); > > + > > + drm_kms_helper_poll_disable(fsl_dev->ddev); > > + regcache_cache_only(fsl_dev->regmap, true); > > + regcache_mark_dirty(fsl_dev->regmap); > > + clk_disable_unprepare(fsl_dev->clk); > > + > > + if (fsl_dev->tcon_regmap) { > > + regcache_cache_only(fsl_dev->tcon_regmap, true); > > + regcache_mark_dirty(fsl_dev->tcon_regmap); > > + clk_disable_unprepare(fsl_dev->tcon_clk); > > + } > > + > > + return 0; > > +} > > + > > +static int fsl_dcu_drm_pm_resume(struct device *dev) { > > + struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev); > > + > > + /* Enable clocks and restore all registers */ > > + if (fsl_dev->tcon_regmap) { > > + clk_prepare_enable(fsl_dev->tcon_clk); > > + regcache_cache_only(fsl_dev->tcon_regmap, false); > > + regcache_sync(fsl_dev->tcon_regmap); > > + } > > + > > + clk_prepare_enable(fsl_dev->clk); > > + drm_kms_helper_poll_enable(fsl_dev->ddev); > > + regcache_cache_only(fsl_dev->regmap, false); > > + regcache_sync(fsl_dev->regmap); > > + > > + if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu")) > > + dcu_pixclk_enable(); > > + > > + return 0; > > +} > > +#endif > > + > > +static const struct dev_pm_ops fsl_dcu_drm_pm_ops = { > > + SET_SYSTEM_SLEEP_PM_OPS(fsl_dcu_drm_pm_suspend, > > fsl_dcu_drm_pm_resume) > > +}; > > + > > +static int fsl_dcu_drm_probe(struct platform_device *pdev) { > > + return drm_platform_init(&fsl_dcu_drm_driver, pdev); } > > + > > +static int fsl_dcu_drm_remove(struct platform_device *pdev) { > > + struct fsl_dcu_drm_device *fsl_dev = platform_get_drvdata(pdev); > > + > > + drm_put_dev(fsl_dev->ddev); > > + > > + return 0; > > +} > > + > > +static const struct of_device_id fsl_dcu_of_match[] = { > > + { .compatible = "fsl,ls1021a-dcu", }, > > + { .compatible = "fsl,vf610-dcu", }, > > + { }, > > +}; > > +MODULE_DEVICE_TABLE(of, fsl_dcu_of_match); > > + > > +static struct platform_driver fsl_dcu_drm_platform_driver = { > > + .probe = fsl_dcu_drm_probe, > > + .remove = fsl_dcu_drm_remove, > > + .driver = { > > + .owner = THIS_MODULE, > > + .name = "fsl,dcu", > > + .pm = &fsl_dcu_drm_pm_ops, > > + .of_match_table = fsl_dcu_of_match, > > + }, > > +}; > > + > > +module_platform_driver(fsl_dcu_drm_platform_driver); > > + > > +MODULE_ALIAS("platform:fsl-dcu-drm"); > > +MODULE_DESCRIPTION("Freescale DCU DRM Driver"); MODULE_LICENSE("GPL"); > > diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h > > b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h > > new file mode 100644 > > index 0000000..40df1c5 > > --- /dev/null > > +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_drv.h > > @@ -0,0 +1,223 @@ > > +/* > > + * Copyright 2015 Freescale Semiconductor, Inc. > > + * > > + * Freescale DCU drm device driver > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; either version 2 of the License, or > > + * (at your option) any later version. > > + */ > > + > > +#ifndef __FSL_DCU_DRM_DRV_H__ > > +#define __FSL_DCU_DRM_DRV_H__ > > + > > +#include <linux/kernel.h> > > +#include <linux/spinlock.h> > > +#include <stddef.h> > > +#include <drm/drm.h> > > +#include <drm/drmP.h> > > +#include <drm/drm_fb_helper.h> > > +#include <drm/drm_crtc_helper.h> > > +#include <drm/drm_gem_cma_helper.h> > > +#include <drm/drm_fb_cma_helper.h> > > + > > +#include "fsl_dcu_drm_crtc.h" > > +#include "fsl_dcu_drm_plane.h" > > +#include "fsl_dcu_drm_connector.h" > > +#define DRIVER_NAME "fsl-dcu-drm" > > + > > +#define DCU_DCU_MODE 0x0010 > > +#define DCU_MODE_BLEND_ITER(x) ((x) << 20) > > +#define DCU_MODE_RASTER_EN BIT(14) > > +#define DCU_MODE_DCU_MODE(x) (x) > > +#define DCU_MODE_DCU_MODE_MASK 0x03 > > +#define DCU_MODE_OFF 0 > > +#define DCU_MODE_NORMAL 1 > > +#define DCU_MODE_TEST 2 > > +#define DCU_MODE_COLORBAR 3 > > + > > +#define DCU_BGND 0x0014 > > +#define DCU_BGND_R(x) ((x) << 16) > > +#define DCU_BGND_G(x) ((x) << 8) > > +#define DCU_BGND_B(x) (x) > > + > > +#define DCU_DISP_SIZE 0x0018 > > +#define DCU_DISP_SIZE_DELTA_Y(x) ((x) << 16) > > +/*Regisiter value 1/16 of horizontal resolution*/ > > +#define DCU_DISP_SIZE_DELTA_X(x) ((x) >> 4) > > + > > +#define DCU_HSYN_PARA 0x001c > > +#define DCU_HSYN_PARA_BP(x) ((x) << 22) > > +#define DCU_HSYN_PARA_PW(x) ((x) << 11) > > +#define DCU_HSYN_PARA_FP(x) (x) > > + > > +#define DCU_VSYN_PARA 0x0020 > > +#define DCU_VSYN_PARA_BP(x) ((x) << 22) > > +#define DCU_VSYN_PARA_PW(x) ((x) << 11) > > +#define DCU_VSYN_PARA_FP(x) (x) > > + > > +#define DCU_SYN_POL 0x0024 > > +#define DCU_SYN_POL_INV_PXCK_FALL (0 << 6) > > +#define DCU_SYN_POL_NEG_REMAIN (0 << 5) > > +#define DCU_SYN_POL_INV_VS_LOW BIT(1) > > +#define DCU_SYN_POL_INV_HS_LOW BIT(0) > > + > > +#define DCU_THRESHOLD 0x0028 > > +#define DCU_THRESHOLD_LS_BF_VS(x) ((x) << 16) > > +#define DCU_THRESHOLD_OUT_BUF_HIGH(x) ((x) << 8) > > +#define DCU_THRESHOLD_OUT_BUF_LOW(x) (x) > > +#define BF_VS_VAL 0x03 > > +#define BUF_MAX_VAL 0x78 > > +#define BUF_MIN_VAL 0x0a > > + > > +#define DCU_INT_STATUS 0x002C > > +#define DCU_INT_STATUS_VSYNC BIT(0) > > +#define DCU_INT_STATUS_UNDRUN BIT(1) > > +#define DCU_INT_STATUS_LSBFVS BIT(2) > > +#define DCU_INT_STATUS_VBLANK BIT(3) > > +#define DCU_INT_STATUS_CRCREADY BIT(4) > > +#define DCU_INT_STATUS_CRCOVERFLOW BIT(5) > > +#define DCU_INT_STATUS_P1FIFOLO BIT(6) > > +#define DCU_INT_STATUS_P1FIFOHI BIT(7) > > +#define DCU_INT_STATUS_P2FIFOLO BIT(8) > > +#define DCU_INT_STATUS_P2FIFOHI BIT(9) > > +#define DCU_INT_STATUS_PROGEND BIT(10) > > +#define DCU_INT_STATUS_IPMERROR BIT(11) > > +#define DCU_INT_STATUS_LYRTRANS BIT(12) > > +#define DCU_INT_STATUS_DMATRANS BIT(14) > > +#define DCU_INT_STATUS_P3FIFOLO BIT(16) > > +#define DCU_INT_STATUS_P3FIFOHI BIT(17) > > +#define DCU_INT_STATUS_P4FIFOLO BIT(18) > > +#define DCU_INT_STATUS_P4FIFOHI BIT(19) > > +#define DCU_INT_STATUS_P1EMPTY BIT(26) > > +#define DCU_INT_STATUS_P2EMPTY BIT(27) > > +#define DCU_INT_STATUS_P3EMPTY BIT(28) > > +#define DCU_INT_STATUS_P4EMPTY BIT(29) > > + > > +#define DCU_INT_MASK 0x0030 > > +#define DCU_INT_MASK_VSYNC BIT(0) > > +#define DCU_INT_MASK_UNDRUN BIT(1) > > +#define DCU_INT_MASK_LSBFVS BIT(2) > > +#define DCU_INT_MASK_VBLANK BIT(3) > > +#define DCU_INT_MASK_CRCREADY BIT(4) > > +#define DCU_INT_MASK_CRCOVERFLOW BIT(5) > > +#define DCU_INT_MASK_P1FIFOLO BIT(6) > > +#define DCU_INT_MASK_P1FIFOHI BIT(7) > > +#define DCU_INT_MASK_P2FIFOLO BIT(8) > > +#define DCU_INT_MASK_P2FIFOHI BIT(9) > > +#define DCU_INT_MASK_PROGEND BIT(10) > > +#define DCU_INT_MASK_IPMERROR BIT(11) > > +#define DCU_INT_MASK_LYRTRANS BIT(12) > > +#define DCU_INT_MASK_DMATRANS BIT(14) > > +#define DCU_INT_MASK_P3FIFOLO BIT(16) > > +#define DCU_INT_MASK_P3FIFOHI BIT(17) > > +#define DCU_INT_MASK_P4FIFOLO BIT(18) > > +#define DCU_INT_MASK_P4FIFOHI BIT(19) > > +#define DCU_INT_MASK_P1EMPTY BIT(26) > > +#define DCU_INT_MASK_P2EMPTY BIT(27) > > +#define DCU_INT_MASK_P3EMPTY BIT(28) > > +#define DCU_INT_MASK_P4EMPTY BIT(29) > > + > > +#define DCU_DIV_RATIO 0x0054 > > + > > +#define DCU_UPDATE_MODE 0x00cc > > +#define DCU_UPDATE_MODE_MODE BIT(31) > > +#define DCU_UPDATE_MODE_READREG BIT(30) > > + > > +#define DCU_DCFB_MAX 0x300 > > + > > +#define DCU_CTRLDESCLN_1(x) (0x200 + (x) * 0x40) > > +#define DCU_CTRLDESCLN_1_HEIGHT(x) ((x) << 16) > > +#define DCU_CTRLDESCLN_1_WIDTH(x) (x) > > + > > +#define DCU_CTRLDESCLN_2(x) (0x204 + (x) * 0x40) > > +#define DCU_CTRLDESCLN_2_POSY(x) ((x) << 16) > > +#define DCU_CTRLDESCLN_2_POSX(x) (x) > > + > > +#define DCU_CTRLDESCLN_3(x) (0x208 + (x) * 0x40) > > + > > +#define DCU_CTRLDESCLN_4(x) (0x20c + (x) * 0x40) > > +#define DCU_CTRLDESCLN_4_EN BIT(31) > > +#define DCU_CTRLDESCLN_4_TILE_EN BIT(30) > > +#define DCU_CTRLDESCLN_4_DATA_SEL_CLUT BIT(29) > > +#define DCU_CTRLDESCLN_4_SAFETY_EN BIT(28) > > +#define DCU_CTRLDESCLN_4_TRANS(x) ((x) << 20) > > +#define DCU_CTRLDESCLN_4_BPP(x) ((x) << 16) > > +#define DCU_CTRLDESCLN_4_RLE_EN BIT(15) > > +#define DCU_CTRLDESCLN_4_LUOFFS(x) ((x) << 4) > > +#define DCU_CTRLDESCLN_4_BB_ON BIT(2) > > +#define DCU_CTRLDESCLN_4_AB(x) (x) > > + > > +#define DCU_CTRLDESCLN_5(x) (0x210 + (x) * 0x40) > > +#define DCU_CTRLDESCLN_5_CKMAX_R(x) ((x) << 16) > > +#define DCU_CTRLDESCLN_5_CKMAX_G(x) ((x) << 8) > > +#define DCU_CTRLDESCLN_5_CKMAX_B(x) (x) > > + > > +#define DCU_CTRLDESCLN_6(x) (0x214 + (x) * 0x40) > > +#define DCU_CTRLDESCLN_6_CKMIN_R(x) ((x) << 16) > > +#define DCU_CTRLDESCLN_6_CKMIN_G(x) ((x) << 8) > > +#define DCU_CTRLDESCLN_6_CKMIN_B(x) (x) > > + > > +#define DCU_CTRLDESCLN_7(x) (0x218 + (x) * 0x40) > > +#define DCU_CTRLDESCLN_7_TILE_VER(x) ((x) << 16) > > +#define DCU_CTRLDESCLN_7_TILE_HOR(x) (x) > > + > > +#define DCU_CTRLDESCLN_8(x) (0x21c + (x) * 0x40) > > +#define DCU_CTRLDESCLN_8_FG_FCOLOR(x) (x) > > + > > +#define DCU_CTRLDESCLN_9(x) (0x220 + (x) * 0x40) > > +#define DCU_CTRLDESCLN_9_BG_BCOLOR(x) (x) > > + > > +#define DCU_CTRLDESCLN_10(x) (0x224 + (x) * 0x40) > > +#define DCU_CTRLDESCLN_10_POST_SKIP(x) ((x) << 16) > > +#define DCU_CTRLDESCLN_10_PRE_SKIP(x) (x) > > + > > +#ifdef CONFIG_SOC_VF610 > > +#define DCU_TOTAL_LAYER_NUM 64 > > +#define DCU_LAYER_NUM_MAX 6 > > +#else > > +#define DCU_TOTAL_LAYER_NUM 16 > > +#define DCU_LAYER_NUM_MAX 4 > > +#endif > > + > > +#define FSL_DCU_RGB565 4 > > +#define FSL_DCU_RGB888 5 > > +#define FSL_DCU_ARGB8888 6 > > +#define FSL_DCU_ARGB1555 11 > > +#define FSL_DCU_ARGB4444 12 > > +#define FSL_DCU_YUV422 14 > > + > > +#define TCON_CTRL1 0x0000 > > +#define TCON_BYPASS_ENABLE BIT(29) > > + > > +#define SCFG_PIXCLKCR 0x28 > > +#define PXCK_ENABLE BIT(31) > > +#define PXCK_DISABLE 0 > > + > > +#define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__) > > + > > +struct clk; > > +struct device; > > +struct drm_device; > > + > > +struct fsl_dcu_drm_device { > > + struct device *dev; > > + struct device_node *np; > > + struct regmap *regmap; > > + struct regmap *tcon_regmap; > > + unsigned int irq; > > + struct clk *clk; > > + struct clk *tcon_clk; > > + /*protects hardware register*/ > > + spinlock_t irq_lock; > > + struct drm_device *ddev; > > + struct drm_fbdev_cma *fbdev; > > + struct drm_crtc crtc; > > + struct drm_encoder encoder; > > + struct fsl_dcu_drm_connector connector; }; > > + > > +void fsl_dcu_fbdev_init(struct drm_device *dev); > > + > > +#endif /* __FSL_DCU_DRM_DRV_H__ */ > > diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c > > b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c > > new file mode 100644 > > index 0000000..f8ef0e1 > > --- /dev/null > > +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_fbdev.c > > @@ -0,0 +1,26 @@ > > +/* > > + * Copyright 2015 Freescale Semiconductor, Inc. > > + * > > + * This program is free software; you can redistribute it and/or modify > > +it > > + * under the terms of the GNU General Public License version 2 as > > +published by > > + * the Free Software Foundation. > > + * > > + * This program is distributed in the hope that it will be useful, but > > +WITHOUT > > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY > > +or > > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public > > +License for > > + * more details. > > + * > > + */ > > + > > +#include <drm/drmP.h> > > +#include <drm/drm_fb_cma_helper.h> > > + > > +#include "fsl_dcu_drm_drv.h" > > + > > +/* initialize fbdev helper */ > > +void fsl_dcu_fbdev_init(struct drm_device *dev) { > > + struct fsl_dcu_drm_device *fsl_dev = dev_get_drvdata(dev->dev); > > + > > + fsl_dev->fbdev = drm_fbdev_cma_init(dev, 24, 1, 1); } > > diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c > > b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c > > new file mode 100644 > > index 0000000..0de21c6 > > --- /dev/null > > +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.c > > @@ -0,0 +1,42 @@ > > +/* > > + * Copyright 2015 Freescale Semiconductor, Inc. > > + * > > + * Freescale DCU drm device driver > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; either version 2 of the License, or > > + * (at your option) any later version. > > + */ > > + > > +#include <drm/drmP.h> > > +#include <drm/drm_atomic_helper.h> > > + > > +#include "fsl_dcu_drm_crtc.h" > > +#include "fsl_dcu_drm_connector.h" > > +#include "fsl_dcu_drm_drv.h" > > + > > +static const struct drm_mode_config_funcs fsl_dcu_drm_mode_config_funcs > = > > { > > + .fb_create = drm_fb_cma_create, > > + .atomic_check = drm_atomic_helper_check, > > + .atomic_commit = drm_atomic_helper_commit, }; > > + > > +int fsl_dcu_drm_modeset_init(struct fsl_dcu_drm_device *fsl_dev) { > > + drm_mode_config_init(fsl_dev->ddev); > > + > > + fsl_dev->ddev->mode_config.min_width = 0; > > + fsl_dev->ddev->mode_config.min_height = 0; > > + fsl_dev->ddev->mode_config.max_width = 2031; > > + fsl_dev->ddev->mode_config.max_height = 2047; > > + fsl_dev->ddev->mode_config.funcs = &fsl_dcu_drm_mode_config_funcs; > > + > > + drm_kms_helper_poll_init(fsl_dev->ddev); > > + fsl_dcu_drm_crtc_create(fsl_dev); > > + fsl_dcu_drm_encoder_create(fsl_dev, &fsl_dev->crtc); > > + fsl_dcu_drm_connector_create(fsl_dev, &fsl_dev->encoder); > > + drm_mode_config_reset(fsl_dev->ddev); > > + > > + return 0; > > +} > > diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.h > > b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.h > > new file mode 100644 > > index 0000000..b9bd299 > > --- /dev/null > > +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_kms.h > > @@ -0,0 +1,17 @@ > > +/* > > + * Copyright 2015 Freescale Semiconductor, Inc. > > + * > > + * Freescale DCU drm device driver > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; either version 2 of the License, or > > + * (at your option) any later version. > > + */ > > + > > +#ifndef __FSL_DCU_DRM_KMS_H__ > > +#define __FSL_DCU_DRM_KMS_H__ > > + > > +int fsl_dcu_drm_modeset_init(struct fsl_dcu_drm_device *fsl_dev); > > + > > +#endif /* __FSL_DCU_DRM_KMS_H__ */ > > diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c > > b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c > > new file mode 100644 > > index 0000000..6146e80 > > --- /dev/null > > +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.c > > @@ -0,0 +1,192 @@ > > +/* > > + * Copyright 2015 Freescale Semiconductor, Inc. > > + * > > + * Freescale DCU drm device driver > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; either version 2 of the License, or > > + * (at your option) any later version. > > + */ > > + > > +#include <drm/drmP.h> > > +#include <drm/drm_crtc.h> > > +#include <drm/drm_crtc_helper.h> > > +#include <drm/drm_fb_cma_helper.h> > > +#include <drm/drm_gem_cma_helper.h> > > +#include <linux/regmap.h> > > +#include <drm/drm_plane_helper.h> > > +#include <drm/drm_atomic_helper.h> > > + > > +#include "fsl_dcu_drm_drv.h" > > +#include "fsl_dcu_drm_kms.h" > > +#include "fsl_dcu_drm_plane.h" > > + > > +#define to_fsl_dcu_plane(plane) \ > > + container_of(plane, struct fsl_dcu_drm_plane, plane) > > + > > +static int > > +fsl_dcu_drm_plane_prepare_fb(struct drm_plane *plane, > > + struct drm_framebuffer *fb, > > + const struct drm_plane_state *new_state) { > > + return 0; > > +} > > + > > +static void > > +fsl_dcu_drm_plane_cleanup_fb(struct drm_plane *plane, > > + struct drm_framebuffer *fb, > > + const struct drm_plane_state *new_state) { } > > + > > +static int fsl_dcu_drm_plane_atomic_check(struct drm_plane *plane, > > + struct drm_plane_state *state) > > +{ > > + return 0; > > +} > > + > > +static void fsl_dcu_drm_plane_atomic_disable(struct drm_plane *plane, > > + struct drm_plane_state *old_state) { } > > + > > +void fsl_dcu_drm_plane_atomic_update(struct drm_plane *plane, > > + struct drm_plane_state *old_state) { > > + struct fsl_dcu_drm_device *fsl_dev = plane->dev->dev_private; > > + struct drm_plane_state *state = plane->state; > > + struct drm_framebuffer *fb = plane->state->fb; > > + u32 index, alpha, bpp; > > + struct drm_gem_cma_object *gem; > > + struct fsl_dcu_drm_plane *fsl_plane = to_fsl_dcu_plane(plane); > > + > > + index = fsl_plane->index; > > + gem = drm_fb_cma_get_gem_obj(fb, 0); > > + > > + switch (fb->pixel_format) { > > + case DRM_FORMAT_RGB565: > > + bpp = FSL_DCU_RGB565; > > + alpha = 0xff; > > + break; > > + case DRM_FORMAT_RGB888: > > + bpp = FSL_DCU_RGB888; > > + alpha = 0xff; > > + break; > > + case DRM_FORMAT_ARGB8888: > > + bpp = FSL_DCU_ARGB8888; > > + alpha = 0xff; > > + break; > > + case DRM_FORMAT_BGRA4444: > > + bpp = FSL_DCU_ARGB4444; > > + alpha = 0xff; > > + break; > > + case DRM_FORMAT_ARGB1555: > > + bpp = FSL_DCU_ARGB1555; > > + alpha = 0xff; > > + break; > > + case DRM_FORMAT_YUV422: > > + bpp = FSL_DCU_YUV422; > > + alpha = 0xff; > > + break; > > + default: > > + return; > > + } > > + > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_1(index), > > + DCU_CTRLDESCLN_1_HEIGHT(state->crtc_h) | > > + DCU_CTRLDESCLN_1_WIDTH(state->crtc_w)); > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_2(index), > > + DCU_CTRLDESCLN_2_POSY(state->crtc_y) | > > + DCU_CTRLDESCLN_2_POSX(state->crtc_x)); > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_3(index), gem->paddr); > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_4(index), > > + DCU_CTRLDESCLN_4_EN | > > + DCU_CTRLDESCLN_4_TRANS(alpha) | > > + DCU_CTRLDESCLN_4_BPP(bpp) | > > + DCU_CTRLDESCLN_4_AB(0)); > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_5(index), > > + DCU_CTRLDESCLN_5_CKMAX_R(0xFF) | > > + DCU_CTRLDESCLN_5_CKMAX_G(0xFF) | > > + DCU_CTRLDESCLN_5_CKMAX_B(0xFF)); > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_6(index), > > + DCU_CTRLDESCLN_6_CKMIN_R(0) | > > + DCU_CTRLDESCLN_6_CKMIN_G(0) | > > + DCU_CTRLDESCLN_6_CKMIN_B(0)); > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_7(index), 0); > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_8(index), > > + DCU_CTRLDESCLN_8_FG_FCOLOR(0)); > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_9(index), > > + DCU_CTRLDESCLN_9_BG_BCOLOR(0)); > > + if (of_device_is_compatible(fsl_dev->np, "fsl,ls1021a-dcu")) > > + regmap_write(fsl_dev->regmap, DCU_CTRLDESCLN_10(index), > > + DCU_CTRLDESCLN_10_POST_SKIP(0) | > > + DCU_CTRLDESCLN_10_PRE_SKIP(0)); > > + regmap_update_bits(fsl_dev->regmap, DCU_DCU_MODE, > > + DCU_MODE_DCU_MODE_MASK, > > + DCU_MODE_DCU_MODE(DCU_MODE_NORMAL)); > > + regmap_write(fsl_dev->regmap, DCU_UPDATE_MODE, > > +DCU_UPDATE_MODE_READREG); } > > + > > +int fsl_dcu_drm_plane_disable(struct drm_plane *plane) { > > + return 0; > > +} > > + > > +void fsl_dcu_drm_plane_destroy(struct drm_plane *plane) { > > + fsl_dcu_drm_plane_disable(plane); > > + drm_plane_cleanup(plane); > > +} > > + > > +static const uint32_t fsl_dcu_drm_plane_formats[] = { > > + DRM_FORMAT_RGB565, > > + DRM_FORMAT_RGB888, > > + DRM_FORMAT_ARGB8888, > > + DRM_FORMAT_ARGB4444, > > + DRM_FORMAT_ARGB1555, > > + DRM_FORMAT_YUV422, > > +}; > > + > > +static const struct drm_plane_funcs fsl_dcu_drm_plane_funcs = { > > + .update_plane = drm_atomic_helper_update_plane, > > + .disable_plane = drm_atomic_helper_disable_plane, > > + .destroy = fsl_dcu_drm_plane_destroy, > > + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, > > + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, > > + .reset = drm_atomic_helper_plane_reset, }; > > + > > +static const struct drm_plane_helper_funcs > fsl_dcu_drm_plane_helper_funcs > > = { > > + .prepare_fb = fsl_dcu_drm_plane_prepare_fb, > > + .cleanup_fb = fsl_dcu_drm_plane_cleanup_fb, > > + .atomic_check = fsl_dcu_drm_plane_atomic_check, > > + .atomic_update = fsl_dcu_drm_plane_atomic_update, > > + .atomic_disable = fsl_dcu_drm_plane_atomic_disable, }; > > + > > +struct drm_plane *fsl_dcu_drm_primary_create_plane(struct drm_device > > +*dev) { > > + struct drm_plane *primary; > > + int ret; > > + > > + primary = kzalloc(sizeof(*primary), GFP_KERNEL); > > + if (!primary) { > > + DRM_DEBUG_KMS("Failed to allocate primary plane\n"); > > + return NULL; > > + } > > + > > + /* possible_crtc's will be filled in later by crtc_init */ > > + ret = drm_universal_plane_init(dev, primary, 0, > > + &fsl_dcu_drm_plane_funcs, > > + fsl_dcu_drm_plane_formats, > > + ARRAY_SIZE(fsl_dcu_drm_plane_formats), > > + DRM_PLANE_TYPE_PRIMARY); > > + if (ret) { > > + kfree(primary); > > + primary = NULL; > > + } > > + drm_plane_helper_add(primary, &fsl_dcu_drm_plane_helper_funcs); > > + > > + return primary; > > +} > > diff --git a/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h > > b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h > > new file mode 100644 > > index 0000000..ccbfa61 > > --- /dev/null > > +++ b/drivers/gpu/drm/fsl-dcu/fsl_dcu_drm_plane.h > > @@ -0,0 +1,23 @@ > > +/* > > + * Copyright 2015 Freescale Semiconductor, Inc. > > + * > > + * Freescale DCU drm device driver > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License as published by > > + * the Free Software Foundation; either version 2 of the License, or > > + * (at your option) any later version. > > + */ > > + > > +#ifndef __FSL_DCU_DRM_PLANE_H__ > > +#define __FSL_DCU_DRM_PLANE_H__ > > + > > +struct fsl_dcu_drm_device; > > +struct fsl_dcu_drm_plane { > > + struct drm_plane plane; > > + unsigned int index; > > +}; > > + > > +struct drm_plane *fsl_dcu_drm_primary_create_plane(struct drm_device > > +*dev); > > + > > +#endif /* __FSL_DCU_DRM_PLANE_H__ */ > > -- > > 2.1.0.27.g96db324 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
