This patch set adds the Tegra dc one-shot support. The patch set is tested on Dalmore + Sharp lq101r1sx01. Basically this patch set is just for RFC. Some DRM files are changes, I guess maybe there are better solutions for that. Also, Thierry mentioned that "te-polarity" can be designed as a GPIO since not every display controller has a dedicate TE pin like Tegra. So I will try to create v2 after some comments are received. Please be noticed that the patch #12 is not part of the feature, it's just used for testing. Mark Zhang (12): drm: Add a new mode flag: DRM_MODE_FLAG_PREFER_ONE_SHOT drm: panel: Add one-shot flag to Sharp lq101r1sx01 driver drm: panel: Turn on TE(Tearing Effect) on Sharp lq101r1sx01 drm: Add DRM mode flag TE polarity dt: panel: Add property "te-polarity" drm: panel: Parse "te-polarity" in Sharp lq101r1sx01 driver drm/tegra: Set NC(Non-contiguous) mode to dc for one-shot drm/panel: Add panel func: idle/busy drm: dsi: Add "enter idle" & "exit idle" dcs functions drm: panel: Add idle/busy in Sharp lq101r1sx01 driver drm/tegra: Suspend dc/dsi/panel in one-shot mode JUST FOR TEST: Add one-shot trigger to update display .../bindings/panel/sharp,lq101r1sx01.txt | 2 + arch/arm/boot/dts/tegra114-dalmore.dts | 2 + drivers/gpu/drm/drm_mipi_dsi.c | 36 ++++++ drivers/gpu/drm/panel/panel-sharp-lq101r1sx01.c | 51 ++++++++- drivers/gpu/drm/tegra/dc.c | 124 ++++++++++++++++++--- drivers/gpu/drm/tegra/dc.h | 5 + drivers/gpu/drm/tegra/drm.h | 4 + drivers/gpu/drm/tegra/dsi.c | 63 ++++++++++- include/drm/drm_mipi_dsi.h | 2 + include/drm/drm_panel.h | 18 +++ include/uapi/drm/drm_mode.h | 3 + 11 files changed, 290 insertions(+), 20 deletions(-) -- 2.1.4 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
