On Sun, May 10, 2015 at 02:40:40PM -0400, nick wrote:
>
>
> On 2015-05-10 02:35 PM, patrik.r.jakobsson@xxxxxxxxx wrote:
> > On Sun, May 10, 2015 at 01:48:14PM -0400, nick wrote:
> >>
> >>
> >> On 2015-05-10 01:04 PM, patrik.r.jakobsson@xxxxxxxxx wrote:
> >>> On Tue, May 05, 2015 at 11:17:07AM -0400, nick wrote:
> >>>>
> >>>>
> >>>> On 2015-05-05 09:06 AM, Patrik Jakobsson wrote:
> >>>>> On Tue, May 5, 2015 at 12:29 AM, Nicholas Krause <xerofoify@xxxxxxxxx> wrote:
> >>>>>> This removes the deprecated functions,i2c_dp_aux_add_bus and
> >>>>>> i2c_dp_aux_prepare_bus and the only call in the function,
> >>>>>> cdv_intel_dp_i2c_init to i2c_dp_aux_add_bus respectfully.
> >>>>>> The call and use of these functions is now replaced alongside
> >>>>>> the removal of setting other values in the function,cdv_intel_dp_i2c_init
> >>>>>> to use the helper function, drm_dp_aux_register that can handle all this
> >>>>>> work internally.
> >>>>>
> >>>>> You need to fill in the drm_dp_aux structure and implement a proper transfer
> >>>>> function. This patch would only break things. But the cdv dp output is already
> >>>>> broken on my system so it needs fixing first.
> >>>>>
> >>>>> -Patrik
> >>>>>
> >>>> Patrik,
> >>>> Due to me not being an expert in this area of the kernel I based my work off the similar function,
> >>>> intel_dp_aux_init for i915. I was unsure of which helper functions for i915 need to be written
> >>>> differently for gma500 based solutions as I don't known the differences between these two in the
> >>>> graphics specs area.
> >>>> Thanks,
> >>>> Nick
> >>>
> >>> Hi Nick
> >>> You are _required_ to know what your patches are doing before sending them. If
> >>> you don't test your code and don't know what it's doing then we will not accept
> >>> it. You're expected to read the available documentation and relevant literature
> >>> before sending patches and asking questions. Otherwise someone else is doing the
> >>> work for you, which I assume is not the purpose of you patch submission.
> >>>
> >>> Thanks
> >>> Patrik
>
> >> Patrik,
> >> Sorry about that my question is actually this ,I am unsure of what parts of the function,intel_dp_aux_init
> >> need to be ported for the gma500 gpu driver. Furthermore I will list what parts for certain I known need to
> >> be ported over above the lines of code in the function definition I have pasted below. Please let me known
> >> if there are any areas I am missing. This is more just of a double check to make sure I don't miss something
> >> critical:)(I like to verify something before I code it).
> >> Sorry for the misunderstanding,
> >
> > You can figure this out by reading the drm dp helpers docs and looking at
> > cdv_intel_dp.c. For instance, in gma500 we initialize DP_B and DP_C.
> >
> > My point is that _you_ need to read the code and understand it. I cannot help
> > you with that.
> >
> > But as I said in my first reply. DP on CDV is broken (at least on my machine) so
> > that should be fixed first.
> >
> > Cheers
> > Patrik
> >
> Patrik,
> Sorry about that :). Your right it's a bad habit :(, I will start working on it.
> Further more by "broken" you mean what. This is very vague and if you would like
> some help with it, I am willing to if you can give me a detailed response of what
> is wrong.
> Nick
Vague? Both DP and LVDS displays are black after boot when DP is connected. What
additional information do you need?
> >> Nick
> >> static void
> >> 1002 intel_dp_aux_init(struct intel_dp *intel_dp, struct intel_connector *connector)
> >> 1003 {
> >> /*Unsure about how to port this over the functions in these lines a.k.a any differences between i915 and gma500 related to these functions?
> >> I read through these function definitions but would like to double check*/
> >> 1004 struct drm_device *dev = intel_dp_to_dev(intel_dp);
> >> 1005 struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
> >> 1006 enum port port = intel_dig_port->port;
> >> /*Port these lines*/
> >> 1007 const char *name = NULL;
> >> 1008 int ret;
> >> /*Port this switch statement */
> >> 1009
> >> 1010 switch (port) {
> >> 1011 case PORT_A:
> >> 1012 intel_dp->aux_ch_ctl_reg = DPA_AUX_CH_CTL;
> >> 1013 name = "DPDDC-A";
> >> 1014 break;
> >> 1015 case PORT_B:
> >> 1016 intel_dp->aux_ch_ctl_reg = PCH_DPB_AUX_CH_CTL;
> >> 1017 name = "DPDDC-B";
> >> 1018 break;
> >> 1019 case PORT_C:
> >> 1020 intel_dp->aux_ch_ctl_reg = PCH_DPC_AUX_CH_CTL;
> >> 1021 name = "DPDDC-C";
> >> 1022 break;
> >> 1023 case PORT_D:
> >> 1024 intel_dp->aux_ch_ctl_reg = PCH_DPD_AUX_CH_CTL;
> >> 1025 name = "DPDDC-D";
> >> 1026 break;
> >> 1027 default:
> >> 1028 BUG();
> >> 1029 }
> >> 1030
> >> 1031 /*
> >> 1032 * The AUX_CTL register is usually DP_CTL + 0x10.
> >> 1033 *
> >> 1034 * On Haswell and Broadwell though:
> >> 1035 * - Both port A DDI_BUF_CTL and DDI_AUX_CTL are on the CPU
> >> 1036 * - Port B/C/D AUX channels are on the PCH, DDI_BUF_CTL on the CPU
> >> 1037 *
> >> 1038 * Skylake moves AUX_CTL back next to DDI_BUF_CTL, on the CPU.
> >> 1039 */
> >> 1040 if (!IS_HASWELL(dev) && !IS_BROADWELL(dev))
> >> 1041 intel_dp->aux_ch_ctl_reg = intel_dp->output_reg + 0x10;
> >> 1042
> >> /*Port these lines*/
> >> 1043 intel_dp->aux.name = name;
> >> 1044 intel_dp->aux.dev = dev->dev;
> >> 1045 intel_dp->aux.transfer = intel_dp_aux_transfer;
> >> 1046
> >> /*Port this devugging message */
> >> 1047 DRM_DEBUG_KMS("registering %s bus for %s\n", name,
> >> 1048 connector->base.kdev->kobj.name);
> >> 1049
> >> /*Port these lines*/
> >> 1050 ret = drm_dp_aux_register(&intel_dp->aux);
> >> 1051 if (ret < 0) {
> >> 1052 DRM_ERROR("drm_dp_aux_register() for %s failed (%d)\n",
> >> 1053 name, ret);
> >> 1054 return;
> >> 1055 }
> >> 1056
> >> /*Port the of the function */
> >> 1057 ret = sysfs_create_link(&connector->base.kdev->kobj,
> >> 1058 &intel_dp->aux.ddc.dev.kobj,
> >> 1059 intel_dp->aux.ddc.dev.kobj.name);
> >> 1060 if (ret < 0) {
> >> 1061 DRM_ERROR("sysfs_create_link() for %s failed (%d)\n", name, ret);
> >> 1062 drm_dp_aux_unregister(&intel_dp->aux);
> >> 1063 }
> >> 1064 }
> >> 1065
> >>>
> >>>>>> Signed-off-by: Nicholas Krause <xerofoify@xxxxxxxxx>
> >>>>>> ---
> >>>>>> drivers/gpu/drm/gma500/cdv_intel_dp.c | 42 ++---------------------------------
> >>>>>> 1 file changed, 2 insertions(+), 40 deletions(-)
> >>>>>>
> >>>>>> diff --git a/drivers/gpu/drm/gma500/cdv_intel_dp.c b/drivers/gpu/drm/gma500/cdv_intel_dp.c
> >>>>>> index 0fafb8e..c8c20fc 100644
> >>>>>> --- a/drivers/gpu/drm/gma500/cdv_intel_dp.c
> >>>>>> +++ b/drivers/gpu/drm/gma500/cdv_intel_dp.c
> >>>>>> @@ -200,38 +200,6 @@ static const struct i2c_algorithm i2c_dp_aux_algo = {
> >>>>>> .functionality = i2c_algo_dp_aux_functionality,
> >>>>>> };
> >>>>>>
> >>>>>> -static void
> >>>>>> -i2c_dp_aux_reset_bus(struct i2c_adapter *adapter)
> >>>>>> -{
> >>>>>> - (void) i2c_algo_dp_aux_address(adapter, 0, false);
> >>>>>> - (void) i2c_algo_dp_aux_stop(adapter, false);
> >>>>>> -}
> >>>>>> -
> >>>>>> -static int
> >>>>>> -i2c_dp_aux_prepare_bus(struct i2c_adapter *adapter)
> >>>>>> -{
> >>>>>> - adapter->algo = &i2c_dp_aux_algo;
> >>>>>> - adapter->retries = 3;
> >>>>>> - i2c_dp_aux_reset_bus(adapter);
> >>>>>> - return 0;
> >>>>>> -}
> >>>>>> -
> >>>>>> -/*
> >>>>>> - * FIXME: This is the old dp aux helper, gma500 is the last driver that needs to
> >>>>>> - * be ported over to the new helper code in drm_dp_helper.c like i915 or radeon.
> >>>>>> - */
> >>>>>> -static int __deprecated
> >>>>>> -i2c_dp_aux_add_bus(struct i2c_adapter *adapter)
> >>>>>> -{
> >>>>>> - int error;
> >>>>>> -
> >>>>>> - error = i2c_dp_aux_prepare_bus(adapter);
> >>>>>> - if (error)
> >>>>>> - return error;
> >>>>>> - error = i2c_add_adapter(adapter);
> >>>>>> - return error;
> >>>>>> -}
> >>>>>> -
> >>>>>> #define _wait_for(COND, MS, W) ({ \
> >>>>>> unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \
> >>>>>> int ret__ = 0; \
> >>>>>> @@ -275,6 +243,7 @@ struct cdv_intel_dp {
> >>>>>> int backlight_on_delay;
> >>>>>> int backlight_off_delay;
> >>>>>> struct drm_display_mode *panel_fixed_mode; /* for eDP */
> >>>>>> + struct drm_dp_aux aux;
> >>>>>> bool panel_on;
> >>>>>> };
> >>>>>>
> >>>>>> @@ -855,18 +824,11 @@ cdv_intel_dp_i2c_init(struct gma_connector *connector,
> >>>>>> intel_dp->algo.running = false;
> >>>>>> intel_dp->algo.address = 0;
> >>>>>> intel_dp->algo.aux_ch = cdv_intel_dp_i2c_aux_ch;
> >>>>>> -
> >>>>>> memset(&intel_dp->adapter, '\0', sizeof (intel_dp->adapter));
> >>>>>> - intel_dp->adapter.owner = THIS_MODULE;
> >>>>>> - intel_dp->adapter.class = I2C_CLASS_DDC;
> >>>>>> - strncpy (intel_dp->adapter.name, name, sizeof(intel_dp->adapter.name) - 1);
> >>>>>> - intel_dp->adapter.name[sizeof(intel_dp->adapter.name) - 1] = '\0';
> >>>>>> - intel_dp->adapter.algo_data = &intel_dp->algo;
> >>>>>> - intel_dp->adapter.dev.parent = connector->base.kdev;
> >>>>>>
> >>>>>> if (is_edp(encoder))
> >>>>>> cdv_intel_edp_panel_vdd_on(encoder);
> >>>>>> - ret = i2c_dp_aux_add_bus(&intel_dp->adapter);
> >>>>>> + ret = drm_dp_aux_register(&intel_dp->aux);
> >>>>>> if (is_edp(encoder))
> >>>>>> cdv_intel_edp_panel_vdd_off(encoder);
> >>>>>>
> >>>>>> --
> >>>>>> 2.1.4
> >>>>>>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
