All modes exposed by simple panels should be tagged as driver defined modes. Moreover, if a panel supports only one mode, this mode is obviously the preferred one. Doing this also fix a problem occurring when a 'video=' parameter is passed on the kernel cmdline. In some cases the user provided mode is preferred over the simple panel ones, which might result in unpredictable behavior. Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> --- drivers/gpu/drm/panel/panel-simple.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index d14b904..95ae390 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -111,6 +111,10 @@ static int panel_simple_get_fixed_modes(struct panel_simple *panel) continue; } + mode->type |= DRM_MODE_TYPE_DRIVER; + if (panel->desc->num_modes == 1) + mode->type |= DRM_MODE_TYPE_PREFERRED; + drm_display_mode_from_videomode(&vm, mode); drm_mode_probed_add(connector, mode); @@ -127,6 +131,10 @@ static int panel_simple_get_fixed_modes(struct panel_simple *panel) continue; } + mode->type |= DRM_MODE_TYPE_DRIVER; + if (panel->desc->num_modes == 1) + mode->type |= DRM_MODE_TYPE_PREFERRED; + drm_mode_set_name(mode); drm_mode_probed_add(connector, mode); -- 1.9.1 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
