On Wed, 29 Apr 2015, Shobhit Kumar wrote:
> On some BYT PLatform the PWM is controlled using CRC PMIC. Add a lookup
> entry for the same to be used by the consumer (Intel GFX)
>
> v2: Remove the lookup table on driver unload (Thierry)
>
> CC: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
> Cc: Alexandre Courbot <gnurou@xxxxxxxxx>
> Cc: Thierry Reding <thierry.reding@xxxxxxxxx>
> Signed-off-by: Shobhit Kumar <shobhit.kumar@xxxxxxxxx>
> ---
> drivers/mfd/intel_soc_pmic_core.c | 12 ++++++++++++
> 1 file changed, 12 insertions(+)
How do you expect this set to be managed?
Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
> diff --git a/drivers/mfd/intel_soc_pmic_core.c b/drivers/mfd/intel_soc_pmic_core.c
> index f3d918e..a00ddd9 100644
> --- a/drivers/mfd/intel_soc_pmic_core.c
> +++ b/drivers/mfd/intel_soc_pmic_core.c
> @@ -25,6 +25,7 @@
> #include <linux/regmap.h>
> #include <linux/mfd/intel_soc_pmic.h>
> #include <linux/gpio/machine.h>
> +#include <linux/pwm.h>
> #include "intel_soc_pmic_core.h"
>
> /* Lookup table for the Panel Enable/Disable line as GPIO signals */
> @@ -37,6 +38,11 @@ static struct gpiod_lookup_table panel_gpio_table = {
> },
> };
>
> +/* PWM consumed by the Intel GFX */
> +static struct pwm_lookup crc_pwm_lookup[] = {
> + PWM_LOOKUP("crystal_cove_pwm", 0, "0000:00:02.0", "pwm_backlight", 0, PWM_POLARITY_NORMAL),
> +};
> +
> static int intel_soc_pmic_find_gpio_irq(struct device *dev)
> {
> struct gpio_desc *desc;
> @@ -99,6 +105,9 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
> /* Add lookup table binding for Panel Control to the GPIO Chip */
> gpiod_add_lookup_table(&panel_gpio_table);
>
> + /* Add lookup table for crc-pwm */
> + pwm_add_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup));
> +
> ret = mfd_add_devices(dev, -1, config->cell_dev,
> config->n_cell_devs, NULL, 0,
> regmap_irq_get_domain(pmic->irq_chip_data));
> @@ -121,6 +130,9 @@ static int intel_soc_pmic_i2c_remove(struct i2c_client *i2c)
> /* Remove lookup table for Panel Control from the GPIO Chip */
> gpiod_remove_lookup_table(&panel_gpio_table);
>
> + /* remove crc-pwm lookup table */
> + pwm_remove_table(crc_pwm_lookup, ARRAY_SIZE(crc_pwm_lookup));
> +
> mfd_remove_devices(&i2c->dev);
>
> return 0;
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
