MIC must be initilized by MIPI DSI when it is being bound.
Signed-off-by: Hyungwon Hwang <human.hwang@xxxxxxxxxxx>
---
Changes for v2:
- None
Changes for v3:
- None
Changes for v4:
- None
Changes for v5:
- None
.../devicetree/bindings/video/exynos_dsim.txt | 23 ++++++++++++++++++---
drivers/gpu/drm/exynos/exynos_drm_dsi.c | 24 ++++++++++++++++++++++
2 files changed, 44 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/video/exynos_dsim.txt b/Documentation/devicetree/bindings/video/exynos_dsim.txt
index 11ccac9..0be0362 100644
--- a/Documentation/devicetree/bindings/video/exynos_dsim.txt
+++ b/Documentation/devicetree/bindings/video/exynos_dsim.txt
@@ -32,10 +32,19 @@ Video interfaces:
Device node can contain video interface port nodes according to [2].
The following are properties specific to those nodes:
- port node:
- - reg: (required) can be 0 for input RGB/I80 port or 1 for DSI port;
+ port node inbound:
+ - reg: (required) must be 0.
+ port node outbound:
+ - reg: (required) must be 1.
- endpoint node of DSI port (reg = 1):
+ endpoint node connected from mic node (reg = 0):
+ - remote-endpoint: specifies the endpoint in mic node. This node is required
+ for Exynos5433 mipi dsi. So mic can access to panel node
+ thoughout this dsi node.
+ endpoint node connected to panel node (reg = 1):
+ - remote-endpoint: specifies the endpoint in panel node. This node is
+ required in all kinds of exynos mipi dsi to represent
+ the connection between mipi dsi and panel.
- samsung,burst-clock-frequency: specifies DSI frequency in high-speed burst
mode
- samsung,esc-clock-frequency: specifies DSI frequency in escape mode
@@ -74,7 +83,15 @@ Example:
#address-cells = <1>;
#size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ decon_to_mic: endpoint {
+ remote-endpoint = <&mic_to_decon>;
+ };
+ };
+
port@1 {
+ reg = <1>;
dsi_ep: endpoint {
reg = <0>;
samsung,burst-clock-frequency = <500000000>;
diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
index ddcb77e..d5a3baf 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c
@@ -20,6 +20,7 @@
#include <linux/irq.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
+#include <linux/of_graph.h>
#include <linux/phy/phy.h>
#include <linux/regulator/consumer.h>
#include <linux/component.h>
@@ -286,6 +287,7 @@ struct exynos_dsi {
struct list_head transfer_list;
struct exynos_dsi_driver_data *driver_data;
+ struct device_node *bridge_node;
};
#define host_to_dsi(host) container_of(host, struct exynos_dsi, dsi_host)
@@ -1776,7 +1778,22 @@ static int exynos_dsi_parse_dt(struct exynos_dsi *dsi)
ret = exynos_dsi_of_read_u32(ep, "samsung,esc-clock-frequency",
&dsi->esc_clk_rate);
+ if (ret < 0)
+ goto end;
+
+ of_node_put(ep);
+
+ ep = of_graph_get_next_endpoint(node, NULL);
+ if (!ep) {
+ ret = -ENXIO;
+ goto end;
+ }
+ dsi->bridge_node = of_graph_get_remote_port_parent(ep);
+ if (!dsi->bridge_node) {
+ ret = -ENXIO;
+ goto end;
+ }
end:
of_node_put(ep);
@@ -1789,6 +1806,7 @@ static int exynos_dsi_bind(struct device *dev, struct device *master,
struct exynos_drm_display *display = dev_get_drvdata(dev);
struct exynos_dsi *dsi = display_to_dsi(display);
struct drm_device *drm_dev = data;
+ struct drm_bridge *bridge;
int ret;
ret = exynos_drm_create_enc_conn(drm_dev, display);
@@ -1798,6 +1816,12 @@ static int exynos_dsi_bind(struct device *dev, struct device *master,
return ret;
}
+ bridge = of_drm_find_bridge(dsi->bridge_node);
+ if (bridge) {
+ display->encoder->bridge = bridge;
+ drm_bridge_attach(drm_dev, bridge);
+ }
+
return mipi_dsi_host_register(&dsi->dsi_host);
}
--
1.9.1
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
