As there isn't a way for the firmware on the Nyan chromebooks to hand
over the display to the kernel, and the kernel isn't redoing the whole
configuration at present.
With this patch, the SOR is brought to a known state and we get correct
display on every boot.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
---
v8: * Use usleep_range instead of msleep as suggested by Dmitry
Osipenko
v7: * Move the reset to the host1x_client_ops.init callback as
suggested by Thierry
* Reduced the time during which the reset line is asserted from
20ms to 2ms
---
drivers/gpu/drm/tegra/sor.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/gpu/drm/tegra/sor.c b/drivers/gpu/drm/tegra/sor.c
index 2afe478..dc51a8e 100644
--- a/drivers/gpu/drm/tegra/sor.c
+++ b/drivers/gpu/drm/tegra/sor.c
@@ -1354,12 +1354,30 @@ static int tegra_sor_init(struct host1x_client *client)
}
}
+ /*
+ * XXX: Remove this reset once proper hand-over from firmware to
+ * kernel is possible.
+ */
+ err = reset_control_assert(sor->rst);
+ if (err < 0) {
+ dev_err(sor->dev, "failed to assert SOR reset: %d\n", err);
+ return err;
+ }
+
err = clk_prepare_enable(sor->clk);
if (err < 0) {
dev_err(sor->dev, "failed to enable clock: %d\n", err);
return err;
}
+ usleep_range(1000, 3000);
+
+ err = reset_control_deassert(sor->rst);
+ if (err < 0) {
+ dev_err(sor->dev, "failed to deassert SOR reset: %d\n", err);
+ return err;
+ }
+
err = clk_prepare_enable(sor->clk_safe);
if (err < 0)
return err;
--
2.1.0
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
