25.03.2015 11:59, Tomeu Vizoso пишет:
As there isn't a way for the firmware on the Nyan chromebooks to hand
over the display to the kernel, and the kernel isn't redoing the whole
configuration at present.
With this patch, the SOR is brought to a known state and we get correct
display on every boot.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@xxxxxxxxxxxxx>
---
v7: * Move the reset to the host1x_client_ops.init callback as
suggested by Thierry
* Reduced the time during which the reset line is asserted from
20ms to 2ms
---
drivers/gpu/drm/tegra/sor.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/gpu/drm/tegra/sor.c b/drivers/gpu/drm/tegra/sor.c
index 2afe478..027a25d22 100644
--- a/drivers/gpu/drm/tegra/sor.c
+++ b/drivers/gpu/drm/tegra/sor.c
@@ -1354,12 +1354,30 @@ static int tegra_sor_init(struct host1x_client *client)
}
}
+ /*
+ * XXX: Remove this reset once proper hand-over from firmware to
+ * kernel is possible.
+ */
+ err = reset_control_assert(sor->rst);
+ if (err < 0) {
+ dev_err(sor->dev, "failed to assert SOR reset: %d\n", err);
+ return err;
+ }
+
err = clk_prepare_enable(sor->clk);
if (err < 0) {
dev_err(sor->dev, "failed to enable clock: %d\n", err);
return err;
}
+ msleep(2);
+
+ err = reset_control_deassert(sor->rst);
+ if (err < 0) {
+ dev_err(sor->dev, "failed to deassert SOR reset: %d\n", err);
+ return err;
+ }
+
err = clk_prepare_enable(sor->clk_safe);
if (err < 0)
return err;
According to kernel doc, you should use usleep_range() instead of msleep().
https://www.kernel.org/doc/Documentation/timers/timers-howto.txt
--
Dmitry
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
