Re: [PATCH v2 3/6] drm/exynos: mic: add MIC driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2015년 03월 18일 17:16, Hyungwon Hwang wrote:
> MIC(Mobile image compressor) is newly added IP in Exynos5433. MIC
> resides between decon and mipi dsim, and compresses frame data by 50%.
> With dsi, not display port, to send frame data to the panel, the
> bandwidth is not enough. That is why this compressor is introduced.
> 
> Signed-off-by: Hyungwon Hwang <human.hwang@xxxxxxxxxxx>
> ---
> Changes for v2:
> - make mic driver to be registered by exynos drm driver instead as a module                                      |      -------------------------------------------------------------------------------------------------------------
> driver                                                                                                           |      -------------------------------------------------------------------------------------------------------------
> - change the description of mic driver in documentation
> - add module author at the top of the source file removing MODULE_OWNER,
> MODULE_DESCRIPTION, MODULE_LICENSE
>  .../devicetree/bindings/video/exynos-mic.txt       |  49 +++
>  drivers/gpu/drm/exynos/Kconfig                     |   6 +
>  drivers/gpu/drm/exynos/Makefile                    |   1 +
>  drivers/gpu/drm/exynos/exynos_drm_drv.c            |   3 +
>  drivers/gpu/drm/exynos/exynos_drm_drv.h            |   1 +
>  drivers/gpu/drm/exynos/exynos_drm_mic.c            | 481 +++++++++++++++++++++
>  6 files changed, 541 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/video/exynos-mic.txt
>  create mode 100644 drivers/gpu/drm/exynos/exynos_drm_mic.c
> 
> diff --git a/Documentation/devicetree/bindings/video/exynos-mic.txt b/Documentation/devicetree/bindings/video/exynos-mic.txt
> new file mode 100644
> index 0000000..006d072
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/exynos-mic.txt
> @@ -0,0 +1,49 @@
> +Device-Tree bindings for Samsung Exynos SoC mobile image compressor (MIC)
> +
> +MIC (mobile image compressor) resides between decon and mipi dsi. Mipi dsi is
> +not capable to transfer high resoltuion frame data as decon can send. MIC
> +solves this problem by compressing the frame data by 1/2 before it is transfered
> +through mipi dsi. The compressed frame data must be uncompressed in the panel
> +PCB.
> +
> +Required properties:
> +- compatible: value should be "samsung,exynos5433-mic".
> +- reg: physical base address and length of the MIC registers set and system
> +       register of mic.
> +- clocks: must include clock specifiers corresponding to entries in the
> +	  clock-names property.
> +- clock-names: list of clock names sorted in the same order as the clocks
> +	       property. Must contain "pclk_mic0", "sclk_rgb_vclk_to_mic0".
> +- ports: contains a port which is connected to decon node and dsi node.
> +	 address-cells and size-cells must 1 and 0, respectively.
> +- port: contains an endpoint node which is connected to the endpoint in the
> +	decon node or dsi node. The reg value must be 0 and 1 respectively.
> +
> +Example:
> +SoC specific DT entry:
> +mic: mic@13930000 {
> +	compatible = "samsung,exynos5433-mic";
> +	reg = <0x13930000 0x48 0x13B80000 0x1010>;
> +	clocks = <&cmu_disp CLK_PCLK_MIC0>,
> +	       <&cmu_disp CLK_SCLK_RGB_VCLK_TO_MIC0>;
> +	clock-names = "pclk_mic0", "sclk_rgb_vclk_to_mic0";
> +
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		port@0 {
> +			reg = <0>;
> +			mic_to_decon: endpoint {
> +				remote-endpoint = <&decon_to_mic>;
> +			};
> +		};
> +
> +		port@1 {
> +			reg = <1>;
> +			mic_to_dsi: endpoint {
> +				remote-endpoint = <&dsi_to_mic>;
> +			};
> +		};
> +	};
> +};
> diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
> index e15cc2e..a796175 100644
> --- a/drivers/gpu/drm/exynos/Kconfig
> +++ b/drivers/gpu/drm/exynos/Kconfig
> @@ -103,3 +103,9 @@ config DRM_EXYNOS_GSC
>  	depends on DRM_EXYNOS_IPP && ARCH_EXYNOS5 && !ARCH_MULTIPLATFORM
>  	help
>  	  Choose this option if you want to use Exynos GSC for DRM.
> +
> +config DRM_EXYNOS_MIC
> +	bool "Exynos DRM MIC"
> +	depends on (DRM_EXYNOS && DRM_EXYNOS5433_DECON)
> +	help
> +	  Choose this option if you want to use Exynos MIC for DRM.
> diff --git a/drivers/gpu/drm/exynos/Makefile b/drivers/gpu/drm/exynos/Makefile
> index fbd084d..7de0b10 100644
> --- a/drivers/gpu/drm/exynos/Makefile
> +++ b/drivers/gpu/drm/exynos/Makefile
> @@ -22,5 +22,6 @@ exynosdrm-$(CONFIG_DRM_EXYNOS_IPP)	+= exynos_drm_ipp.o
>  exynosdrm-$(CONFIG_DRM_EXYNOS_FIMC)	+= exynos_drm_fimc.o
>  exynosdrm-$(CONFIG_DRM_EXYNOS_ROTATOR)	+= exynos_drm_rotator.o
>  exynosdrm-$(CONFIG_DRM_EXYNOS_GSC)	+= exynos_drm_gsc.o
> +exynosdrm-$(CONFIG_DRM_EXYNOS_MIC)     += exynos_drm_mic.o
> 
>  obj-$(CONFIG_DRM_EXYNOS)		+= exynosdrm.o
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c
> index 1fa0dd0..ec9984d 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c
> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c
> @@ -562,6 +562,9 @@ static struct platform_driver *const exynos_drm_kms_drivers[] = {
>  #ifdef CONFIG_DRM_EXYNOS7_DECON
>  	&decon_driver,
>  #endif
> +#ifdef CONFIG_DRM_EXYNOS_MIC
> +	&mic_driver,
> +#endif
>  #ifdef CONFIG_DRM_EXYNOS_DP
>  	&dp_driver,
>  #endif
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.h b/drivers/gpu/drm/exynos/exynos_drm_drv.h
> index 40996d8..9c94dc9 100644
> --- a/drivers/gpu/drm/exynos/exynos_drm_drv.h
> +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.h
> @@ -357,4 +357,5 @@ extern struct platform_driver fimc_driver;
>  extern struct platform_driver rotator_driver;
>  extern struct platform_driver gsc_driver;
>  extern struct platform_driver ipp_driver;
> +extern struct platform_driver mic_driver;
>  #endif
> diff --git a/drivers/gpu/drm/exynos/exynos_drm_mic.c b/drivers/gpu/drm/exynos/exynos_drm_mic.c
> new file mode 100644
> index 0000000..b898a2a
> --- /dev/null
> +++ b/drivers/gpu/drm/exynos/exynos_drm_mic.c
> @@ -0,0 +1,481 @@
> +/*
> + * Copyright (C) 2015 Samsung Electronics Co.Ltd
> + * Authors:
> + *	Hyungwon Hwang <human.hwang@xxxxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundationr
> + */
> +
> +#include <linux/platform_device.h>
> +#include <video/of_videomode.h>
> +#include <linux/of_address.h>
> +#include <video/videomode.h>
> +#include <linux/module.h>
> +#include <linux/delay.h>
> +#include <linux/mutex.h>
> +#include <linux/of.h>
> +#include <linux/of_graph.h>
> +#include <linux/clk.h>
> +#include <drm/drmP.h>
> +
> +/* Sysreg registers for MIC */
> +#define DSD_CFG_MUX	0x1004
> +#define MIC0_RGB_MUX	(1 << 0)
> +#define MIC0_I80_MUX	(1 << 1)
> +#define MIC0_ON_MUX	(1 << 5)
> +
> +/* MIC registers */
> +#define MIC_OP				0x0
> +#define MIC_IP_VER			0x0004
> +#define MIC_V_TIMING_0			0x0008
> +#define MIC_V_TIMING_1			0x000C
> +#define MIC_IMG_SIZE			0x0010
> +#define MIC_INPUT_TIMING_0		0x0014
> +#define MIC_INPUT_TIMING_1		0x0018
> +#define MIC_2D_OUTPUT_TIMING_0		0x001C
> +#define MIC_2D_OUTPUT_TIMING_1		0x0020
> +#define MIC_2D_OUTPUT_TIMING_2		0x0024
> +#define MIC_3D_OUTPUT_TIMING_0		0x0028
> +#define MIC_3D_OUTPUT_TIMING_1		0x002C
> +#define MIC_3D_OUTPUT_TIMING_2		0x0030
> +#define MIC_CORE_PARA_0			0x0034
> +#define MIC_CORE_PARA_1			0x0038
> +#define MIC_CTC_CTRL			0x0040
> +#define MIC_RD_DATA			0x0044
> +
> +#define MIC_UPD_REG			(1 << 31)
> +#define MIC_ON_REG			(1 << 30)
> +#define MIC_TD_ON_REG			(1 << 29)
> +#define MIC_BS_CHG_OUT			(1 << 16)
> +#define MIC_VIDEO_TYPE(x)		(((x) & 0xf) << 12)
> +#define MIC_PSR_EN			(1 << 5)
> +#define MIC_SW_RST			(1 << 4)
> +#define MIC_ALL_RST			(1 << 3)
> +#define MIC_CORE_VER_CONTROL		(1 << 2)
> +#define MIC_MODE_SEL_COMMAND_MODE	(1 << 1)
> +#define MIC_MODE_SEL_MASK		(1 << 1)
> +#define MIC_CORE_EN			(1 << 0)
> +
> +#define MIC_V_PULSE_WIDTH(x)		(((x) & 0x3fff) << 16)
> +#define MIC_V_PERIOD_LINE(x)		((x) & 0x3fff)
> +
> +#define MIC_VBP_SIZE(x)			(((x) & 0x3fff) << 16)
> +#define MIC_VFP_SIZE(x)			((x) & 0x3fff)
> +
> +#define MIC_IMG_V_SIZE(x)		(((x) & 0x3fff) << 16)
> +#define MIC_IMG_H_SIZE(x)		((x) & 0x3fff)
> +
> +#define MIC_H_PULSE_WIDTH_IN(x)		(((x) & 0x3fff) << 16)
> +#define MIC_H_PERIOD_PIXEL_IN(x)	((x) & 0x3fff)
> +
> +#define MIC_HBP_SIZE_IN(x)		(((x) & 0x3fff) << 16)
> +#define MIC_HFP_SIZE_IN(x)		((x) & 0x3fff)
> +
> +#define MIC_H_PULSE_WIDTH_2D(x)		(((x) & 0x3fff) << 16)
> +#define MIC_H_PERIOD_PIXEL_2D(x)	((x) & 0x3fff)
> +
> +#define MIC_HBP_SIZE_2D(x)		(((x) & 0x3fff) << 16)
> +#define MIC_HFP_SIZE_2D(x)		((x) & 0x3fff)
> +
> +#define MIC_BS_SIZE_2D(x)	((x) & 0x3fff)
> +
> +enum {
> +	ENDPOINT_DECON_NODE,
> +	ENDPOINT_DSI_NODE,
> +	NUM_ENDPOINTS
> +};
> +
> +static char *clk_names[] = { "pclk_mic0", "sclk_rgb_vclk_to_mic0" };
> +#define NUM_CLKS		ARRAY_SIZE(clk_names)
> +static DEFINE_MUTEX(mic_mutex);
> +
> +struct exynos_mic {
> +	struct device *dev;
> +	void __iomem *reg;
> +	void __iomem *sysreg;
> +	struct clk *clks[NUM_CLKS];
> +
> +	bool i80_mode;
> +	struct videomode vm;
> +	struct drm_encoder *encoder;
> +	struct drm_bridge bridge;
> +
> +	bool enabled;
> +};
> +
> +static void mic_set_path(struct exynos_mic *mic, bool enable)
> +{
> +	u32 reg;
> +
> +	reg = readl(mic->sysreg + DSD_CFG_MUX);
> +	if (enable)
> +		reg |= MIC0_RGB_MUX | MIC0_I80_MUX | MIC0_ON_MUX;
> +	else
> +		reg &= ~(MIC0_RGB_MUX | MIC0_I80_MUX | MIC0_ON_MUX);

exynos_mic has already which video mode - RGB or i80 - is used so it'd
be reasonable to select one of them to avoid confusing.

> +
> +	writel(reg, mic->sysreg + DSD_CFG_MUX);
> +}
> +
> +static int mic_sw_reset(struct exynos_mic *mic)
> +{
> +	unsigned int retry = 100;
> +	int ret;
> +
> +	writel(MIC_SW_RST, mic->reg + MIC_OP);
> +
> +	while (retry-- > 0) {
> +		ret = readl(mic->reg + MIC_OP);
> +		if (!(ret & MIC_SW_RST))
> +			return 0;
> +
> +		udelay(10);
> +	}
> +
> +	return -ETIMEDOUT;
> +}
> +
> +static void mic_set_porch_timing(struct exynos_mic *mic)
> +{
> +	struct videomode vm;
> +	u32 reg;
> +
> +	if (!mic->i80_mode) {

It'd be better to check it before this function is called. This funcion
call really is unnecessary in case of i80 mode.

> +		vm = mic->vm;
> +
> +		reg = MIC_V_PULSE_WIDTH(vm.vsync_len) +
> +			MIC_V_PERIOD_LINE(vm.vsync_len + vm.vactive +
> +					vm.vback_porch + vm.vfront_porch);
> +		writel(reg, mic->reg + MIC_V_TIMING_0);
> +
> +		reg = MIC_VBP_SIZE(vm.vback_porch) +
> +						MIC_VFP_SIZE(vm.vfront_porch);
> +		writel(reg, mic->reg + MIC_V_TIMING_1);
> +
> +		reg = MIC_V_PULSE_WIDTH(vm.hsync_len) +
> +			MIC_V_PERIOD_LINE(vm.hsync_len + vm.hactive +
> +					vm.hback_porch + vm.hfront_porch);
> +		writel(reg, mic->reg + MIC_INPUT_TIMING_0);
> +
> +		reg = MIC_VBP_SIZE(vm.hback_porch) +
> +						MIC_VFP_SIZE(vm.hfront_porch);
> +		writel(reg, mic->reg + MIC_INPUT_TIMING_1);
> +	}
> +}
> +
> +static void mic_set_img_size(struct exynos_mic *mic)
> +{
> +	struct videomode *vm = &mic->vm;
> +	u32 reg;
> +
> +	reg = MIC_IMG_H_SIZE(vm->hactive) +
> +		MIC_IMG_V_SIZE(vm->vactive);
> +
> +	writel(reg, mic->reg + MIC_IMG_SIZE);
> +}
> +
> +static void mic_set_output_timing(struct exynos_mic *mic)
> +{
> +	struct videomode vm = mic->vm;
> +	u32 reg, bs_size_2d;
> +
> +	DRM_DEBUG("w: %u, h: %u\n", vm.hactive, vm.vactive);
> +	bs_size_2d = ((vm.hactive >> 2) << 1) + (vm.vactive % 4);
> +	reg = MIC_BS_SIZE_2D(bs_size_2d);
> +	writel(reg, mic->reg + MIC_2D_OUTPUT_TIMING_2);
> +
> +	if (!mic->i80_mode) {

Ditto.

> +		reg = MIC_H_PULSE_WIDTH_2D(vm.hsync_len) +
> +			MIC_H_PERIOD_PIXEL_2D(vm.hsync_len + bs_size_2d +
> +					vm.hback_porch + vm.hfront_porch);
> +		writel(reg, mic->reg + MIC_2D_OUTPUT_TIMING_0);
> +
> +		reg = MIC_HBP_SIZE_2D(vm.hback_porch) +
> +			MIC_H_PERIOD_PIXEL_2D(vm.hfront_porch);
> +		writel(reg, mic->reg + MIC_2D_OUTPUT_TIMING_1);
> +	}
> +}
> +
> +static void mic_set_reg_on(struct exynos_mic *mic, bool enable)
> +{
> +	u32 reg = readl(mic->reg + MIC_OP);
> +
> +	if (enable) {
> +		reg &= ~(MIC_MODE_SEL_MASK | MIC_CORE_VER_CONTROL | MIC_PSR_EN);
> +		reg |= (MIC_CORE_EN | MIC_BS_CHG_OUT | MIC_ON_REG);
> +
> +		if (mic->i80_mode)
> +			reg |= MIC_MODE_SEL_COMMAND_MODE;

Set explicitly it to video mode in case of RGB mode even though MODE_SET
field of this register has 0x0 as default.

i.e.,
               reg  &= ~MIC_MODE_SEL_COMMAND_MODE;
               if (mic->i80_mode)
                        reg |= MIC_MODE_SEL_COMMAND_MODE;

> +	} else {
> +		reg &= ~MIC_CORE_EN;
> +	}
> +
> +	reg |= MIC_UPD_REG;
> +	writel(reg, mic->reg + MIC_OP);
> +}
> +
> +static struct device_node *get_remote_node(struct device_node *from, int reg)
> +{
> +	struct device_node *endpoint = NULL, *remote_node = NULL;
> +
> +	endpoint = of_graph_get_endpoint_by_regs(from, reg, -1);
> +	if (!endpoint) {
> +		DRM_ERROR("mic: Failed to find remote port from %s",
> +				from->full_name);
> +		goto exit;
> +	}
> +
> +	remote_node = of_graph_get_remote_port_parent(endpoint);
> +	if (!remote_node) {
> +		DRM_ERROR("mic: Failed to find remote port parent from %s",
> +							from->full_name);
> +		goto exit;
> +	}
> +
> +exit:
> +	of_node_put(endpoint);
> +	return remote_node;
> +}
> +
> +static int parse_dt(struct exynos_mic *mic)
> +{
> +	int ret = 0, i, j;
> +	struct device_node *remote_node;
> +	struct device_node *nodes[3];
> +
> +	/*
> +	 * The order of endpoints does matter.
> +	 * The first node must be for decon and the second one must be for dsi.
> +	 */
> +	for (i = 0, j = 0; i < NUM_ENDPOINTS; i++) {
> +		remote_node = get_remote_node(mic->dev->of_node, i);
> +		if (!remote_node) {
> +			ret = -EPIPE;
> +			goto exit;
> +		}
> +		nodes[j++] = remote_node;
> +
> +		switch (i) {
> +		case ENDPOINT_DECON_NODE:
> +			/* decon node */
> +			if (of_get_child_by_name(remote_node,
> +						"i80-if-timings"))
> +				mic->i80_mode = 1;
> +
> +			break;
> +		case ENDPOINT_DSI_NODE:
> +			/* panel node */
> +			remote_node = get_remote_node(remote_node, 1);
> +			if (!remote_node) {
> +				ret = -EPIPE;
> +				goto exit;
> +			}
> +			nodes[j++] = remote_node;
> +
> +			ret = of_get_videomode(remote_node,
> +							&mic->vm, 0);
> +			if (ret) {
> +				DRM_ERROR("mic: failed to get videomode");
> +				goto exit;
> +			}
> +
> +			break;
> +		default:
> +			DRM_ERROR("mic: Unknown endpoint from MIC");
> +			break;
> +		}
> +	}
> +
> +exit:
> +	while (--j > -1)
> +		of_node_put(nodes[j]);
> +
> +	return ret;
> +}
> +
> +void mic_disable(struct drm_bridge *bridge) { }

It seems that drm_encoder_disable function of drm_crtc_helper.c doesn't
check if the disable callback is NULL or not. Anyway, no problem but
this funtion could be removed with the disable callback checking later.

> +
> +void mic_post_disable(struct drm_bridge *bridge)
> +{
> +	struct exynos_mic *mic = bridge->driver_private;
> +	int i;
> +
> +	mutex_lock(&mic_mutex);
> +	if (!mic->enabled)
> +		goto already_disabled;
> +
> +	mic_set_path(mic, 0);
> +
> +	for (i = NUM_CLKS - 1; i > -1; i--)
> +		clk_disable_unprepare(mic->clks[i]);
> +
> +	mic->enabled = 0;
> +
> +already_disabled:
> +	mutex_unlock(&mic_mutex);
> +}
> +
> +void mic_pre_enable(struct drm_bridge *bridge)
> +{
> +	struct exynos_mic *mic = bridge->driver_private;
> +	int ret, i;
> +
> +	mutex_lock(&mic_mutex);
> +	if (mic->enabled)
> +		goto already_enabled;
> +
> +	for (i = 0; i < NUM_CLKS; i++) {
> +		ret = clk_prepare_enable(mic->clks[i]);
> +		if (ret < 0) {
> +			DRM_ERROR("Failed to enable clock (%s)\n",
> +							clk_names[i]);
> +			goto turn_off_clks;
> +		}
> +	}
> +
> +	mic_set_path(mic, 1);
> +
> +	ret = mic_sw_reset(mic);
> +	if (ret) {
> +		DRM_ERROR("Failed to reset\n");
> +		goto turn_off_clks;
> +	}
> +
> +	mic_set_porch_timing(mic);
> +	mic_set_img_size(mic);
> +	mic_set_output_timing(mic);
> +	mic_set_reg_on(mic, 1);
> +	mic->enabled = 1;
> +	mutex_unlock(&mic_mutex);
> +
> +	return;
> +
> +turn_off_clks:
> +	while (--i > -1)
> +		clk_disable_unprepare(mic->clks[i]);
> +already_enabled:
> +	mutex_unlock(&mic_mutex);
> +}
> +
> +void mic_enable(struct drm_bridge *bridge) { }
> +
> +void mic_destroy(struct drm_bridge *bridge)
> +{
> +	struct exynos_mic *mic = bridge->driver_private;
> +	int i;
> +
> +	mutex_lock(&mic_mutex);
> +	if (!mic->enabled)
> +		goto already_disabled;
> +
> +	for (i = NUM_CLKS - 1; i > -1; i--)
> +		clk_disable_unprepare(mic->clks[i]);
> +
> +already_disabled:
> +	mutex_unlock(&mic_mutex);
> +}
> +
> +struct drm_bridge_funcs mic_bridge_funcs = {
> +	.disable = mic_disable,
> +	.post_disable = mic_post_disable,
> +	.pre_enable = mic_pre_enable,
> +	.enable = mic_enable,
> +};
> +
> +int exynos_mic_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct exynos_mic *mic;
> +	struct resource res;
> +	int ret, i;
> +
> +	mic = devm_kzalloc(dev, sizeof(*mic), GFP_KERNEL);
> +	if (!mic) {
> +		DRM_ERROR("mic: Failed to allocate memory for MIC object\n");
> +		ret = -ENOMEM;
> +		goto err;
> +	}
> +
> +	mic->dev = dev;
> +
> +	ret = parse_dt(mic);
> +	if (ret)
> +		goto err;
> +
> +	ret = of_address_to_resource(dev->of_node, 0, &res);
> +	if (ret) {
> +		DRM_ERROR("mic: Failed to get mem region for MIC\n");
> +		goto err;
> +	}
> +	mic->reg = devm_ioremap(dev, res.start, resource_size(&res));
> +	if (!mic->reg) {
> +		DRM_ERROR("mic: Failed to remap for MIC\n");
> +		ret = -ENOMEM;
> +		goto err;
> +	}
> +
> +	ret = of_address_to_resource(dev->of_node, 1, &res);
> +	if (ret) {
> +		DRM_ERROR("mic: Failed to get mem region for MIC\n");
> +		goto err;
> +	}
> +	mic->sysreg = devm_ioremap(dev, res.start, resource_size(&res));

Consider to use syscon framework to access system registers.

> +	if (!mic->sysreg) {
> +		DRM_ERROR("mic: Failed to remap for MIC\n");
> +		goto err;
> +	}
> +
> +	mic->bridge.funcs = &mic_bridge_funcs;
> +	mic->bridge.of_node = dev->of_node;
> +	mic->bridge.driver_private = mic;
> +	ret = drm_bridge_add(&mic->bridge);
> +	if (ret) {
> +		DRM_ERROR("mic: Failed to add MIC to the global bridge list\n");
> +		goto err;
> +	}
> +
> +	for (i = 0; i < NUM_CLKS; i++) {
> +		mic->clks[i] = of_clk_get_by_name(dev->of_node, clk_names[i]);
> +		if (IS_ERR(mic->clks[i])) {
> +			DRM_ERROR("mic: Failed to get clock (%s)\n",
> +								clk_names[i]);
> +			ret = PTR_ERR(mic->clks[i]);
> +			goto err;
> +		}
> +	}
> +
> +	DRM_INFO("MIC has been probed\n");

Use DRM_DEBUG_KMS instead.

Thanks,
Inki Dae

> +
> +err:
> +	return ret;
> +}
> +
> +static int exynos_mic_remove(struct platform_device *pdev)
> +{
> +	struct exynos_mic *mic = platform_get_drvdata(pdev);
> +	int i;
> +
> +	drm_bridge_remove(&mic->bridge);
> +
> +	for (i = NUM_CLKS - 1; i > -1; i--)
> +		clk_put(mic->clks[i]);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id exynos_mic_of_match[] = {
> +	{ .compatible = "samsung,exynos5433-mic" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, exynos_mic_of_match);
> +
> +struct platform_driver mic_driver = {
> +	.probe		= exynos_mic_probe,
> +	.remove		= exynos_mic_remove,
> +	.driver		= {
> +		.name	= "exynos-mic",
> +		.owner	= THIS_MODULE,
> +		.of_match_table = exynos_mic_of_match,
> +	},
> +};
> --
> 1.9.1
> 
> 

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux