Re: [RFC/PATCH 0/5] Add live source objects to DRM

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Daniel,

On Monday 16 March 2015 09:35:22 Daniel Vetter wrote:
> On Sun, Mar 15, 2015 at 11:55:35PM +0200, Laurent Pinchart wrote:
> > Hello,
> > 
> > I have a feeling that RFC/PATCH will work better than just RFC, so here's
> > a patch set that adds a new object named live source to DRM.
> > 
> > The need comes from the Renesas R-Car SoCs in which a video processing
> > engine (named VSP1) that operates from memory to memory has one output
> > directly connected to a plane of the display engine (DU) without going
> > through memory.
> > 
> > The VSP1 is supported by a V4L2 driver. While it could be argued that it
> > should instead be supported directly by the DRM rcar-du driver, this
> > wouldn't be a good idea for at least two reasons. First, the R-Car SoCs
> > contain several VSP1 instances, of which only a subset have a direct DU
> > connection. The only other instances operate solely in memory to memory
> > mode. Then, the VSP1 is a video processing engine and not a display
> > engine. Its features are easily supported by the V4L2 API, but don't map
> > to the DRM/KMS API. Significant changes to DRM/KMS would be required,
> > beyond what is in my opinion an acceptable scope for a display API.
> > 
> > Now that the need to interface two separate devices supported by two
> > different drivers in two separate subsystems has been established, we
> > need an API to do so. It should be noted that while that API doesn't
> > exist in the mainline kernel, the need isn't limited to Renesas SoCs.
> > 
> > This patch set proposes one possible solution for the problem in the form
> > of a new DRM object named live source. Live sources are created by
> > drivers to model hardware connections between a plane input and an
> > external source, and are attached to planes through the KMS userspace
> > API.
> > 
> > Patch 1/5 adds live source objects to DRM, with an in-kernel API for
> > drivers to register the sources, and a userspace API to enumerate and
> > configure them. Configuring a live source sets the width, height and
> > pixel format of the video stream. This should ideally be queried directly
> > from the driver that supports the live source device, but I've decided
> > not to implement such communication between V4L2 and DRM/KMS at the
> > moment to keep the proposal simple.
> > 
> > Patch 2/2 implements connection between live sources and planes. This
> > takes different forms depending on whether drivers use the setplane or the
> > atomic updates API:
> > 
> > - For setplane, the fb field can now contain a live source ID in addition
> >   to a framebuffer ID. As DRM allocates object IDs from a single ID space,
> >   the type can be inferred from the ID. This makes specifying both a
> >   framebuffer and a live source impossible, which isn't an issue given
> >   that such a configuration would be invalid.
> >   
> >   The live source is looked up by the DRM core and passed as a pointer to
> >   the .update_plane() operation. Unlike framebuffers live sources are not
> >   refcounted as they're created statically at driver initialization time.
> > 
> > - For atomic update, a new SRC_ID property has been added to planes. The
> >   live source is looked up from the source ID and stored into the plane
> >   state.
> 
> What about directly treating live sources as (very) special framebuffers?
> A bunch of reasons:
> - All the abi fu above gets resolved naturally.
> - You have lot of duplication between fb and live source wrt size,
>   possible/selected pixel format and other stuff.
> - The backing storage of framebuffers is fully opaque anyway ...
> 
> I think we still need separate live source objects though for things like
> telling userspace what v4l thing it corresponds to, and for getting at the
> pixel format. But connecting the live source with the plane could still be
> done with a framebuffer and a special flag in the addfb2 ioctl to use
> live sources as backing storage ids instead of gem/ttm handles.
> 
> That would also give you a good point to enforce pixel format
> compatibility: As soon as someone created a framebuffer for a live source
> you disallow pixel format changes in the v4l pipeline to make sure things
> will fit.

That's an interesting idea, I'll give it a try. This will have to wait a 
little bit though, I'll be busy with other tasks this week, and I'll be 
attending ELC next week.

Thank you for the quick review and the proposal, it's very appreciated.

> > Patches 3/5 to 5/5 then implement support for live sources in the R-Car DU
> > driver.
> > 
> > Nothing here is set in stone. One point I'm not sure about is whether live
> > sources support should be enabled for setplane or only for atomic updates.
> > Other parts of the API can certainly be modified as well, and I'm open for
> > totally different implementations as well.
> 
> Imo this should be irrespective of atomic or not really. And by using
> magic framebuffers as the link we'd get that for free.
> 
> Cheers, Daniel
> 
> > Laurent Pinchart (5):
> >   drm: Add live source object
> >   drm: Connect live source to plane
> >   drm/rcar-du: Add VSP1 support to the planes allocator
> >   drm/rcar-du: Add VSP1 live source support
> >   drm/rcar-du: Restart the DU group when a plane source changes
> >  
> >  drivers/gpu/drm/armada/armada_overlay.c     |   2 +-
> >  drivers/gpu/drm/drm_atomic.c                |   7 +
> >  drivers/gpu/drm/drm_atomic_helper.c         |   4 +
> >  drivers/gpu/drm/drm_crtc.c                  | 365 +++++++++++++++++++++--
> >  drivers/gpu/drm/drm_fops.c                  |   6 +-
> >  drivers/gpu/drm/drm_ioctl.c                 |   3 +
> >  drivers/gpu/drm/drm_plane_helper.c          |   1 +
> >  drivers/gpu/drm/exynos/exynos_drm_crtc.c    |   4 +-
> >  drivers/gpu/drm/exynos/exynos_drm_plane.c   |   3 +-
> >  drivers/gpu/drm/exynos/exynos_drm_plane.h   |   3 +-
> >  drivers/gpu/drm/i915/intel_display.c        |   4 +-
> >  drivers/gpu/drm/i915/intel_sprite.c         |   2 +-
> >  drivers/gpu/drm/imx/ipuv3-plane.c           |   3 +-
> >  drivers/gpu/drm/nouveau/dispnv04/overlay.c  |   6 +-
> >  drivers/gpu/drm/omapdrm/omap_plane.c        |   1 +
> >  drivers/gpu/drm/rcar-du/rcar_du_crtc.c      |  10 +-
> >  drivers/gpu/drm/rcar-du/rcar_du_drv.c       |   6 +-
> >  drivers/gpu/drm/rcar-du/rcar_du_drv.h       |   3 +
> >  drivers/gpu/drm/rcar-du/rcar_du_group.c     |  21 +-
> >  drivers/gpu/drm/rcar-du/rcar_du_group.h     |   2 +
> >  drivers/gpu/drm/rcar-du/rcar_du_kms.c       |  62 ++++-
> >  drivers/gpu/drm/rcar-du/rcar_du_plane.c     | 196 ++++++++++++---
> >  drivers/gpu/drm/rcar-du/rcar_du_plane.h     |  11 +
> >  drivers/gpu/drm/rcar-du/rcar_du_regs.h      |   1 +
> >  drivers/gpu/drm/rockchip/rockchip_drm_vop.c |   5 +-
> >  drivers/gpu/drm/shmobile/shmob_drm_plane.c  |   3 +-
> >  drivers/gpu/drm/sti/sti_drm_plane.c         |   3 +-
> >  drivers/gpu/drm/sti/sti_hqvdp.c             |   2 +-
> >  include/drm/drmP.h                          |   3 +
> >  include/drm/drm_atomic_helper.h             |   1 +
> >  include/drm/drm_crtc.h                      |  48 ++++
> >  include/drm/drm_plane_helper.h              |   1 +
> >  include/uapi/drm/drm.h                      |   4 +
> >  include/uapi/drm/drm_mode.h                 |  32 +++
> >  34 files changed, 728 insertions(+), 100 deletions(-)

-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux