On 03/10/2015 03:16 PM, Daniel Vetter wrote:
On Tue, Mar 10, 2015 at 03:11:28PM +0530, Archit Taneja wrote:
Legacy fbdev emulation support via DRM is achieved through KMS FB helpers.
Most modesetting drivers enable provide fbdev emulation by default by selecting
KMS FB helpers. A few provide a separate Kconfig option for the user to enable
or disbale fbdev emulation.
Enabling fbdev emulation is finally a distro-level decision. Having a top level
Kconfig option for fbdev emulation helps by providing a uniform way to
enable/disable fbdev emulation for any modesetting driver. It also lets us
remove unnecessary driver specific Kconfig options that causes bloat.
With a top level Kconfig in place, we can stub out the fb helper functions when
not needed without breaking functionality. Having stub functions also prevents
drivers to require wrapping fb helper function calls with #ifdefs.
DRM_FBDEV_EMULATION defaults to y since many drivers enable fbdev emulation by
default and majority of distributions expect the fbdev interface in the kernel.
For now, this config selects both FB_SYS_* and FB_CFB_* configs as some
modesetting drivers use the former and other the later. This needs to be taken
care of in a better way.
Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/Kconfig | 18 +++++++
drivers/gpu/drm/Makefile | 4 ++
include/drm/drm_fb_helper.h | 120 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 142 insertions(+)
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 151a050..38f83a0 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -40,6 +40,24 @@ config DRM_KMS_FB_HELPER
help
FBDEV helpers for KMS drivers.
+config DRM_FBDEV_EMULATION
+ bool "Enable legacy fbdev support for your modesetting driver"
+ depends on DRM
+ select DRM_KMS_HELPER
+ select DRM_KMS_FB_HELPER
+ select FB_SYS_FILLRECT
+ select FB_SYS_COPYAREA
+ select FB_SYS_IMAGEBLIT
+ select FB_SYS_FOPS
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ default y
+ help
+ Choose this option if you have a need for the legacy fbdev
+ support. Note that this support also provide the linux console
+ support on top of your modesetting driver.
+
config DRM_LOAD_EDID_FIRMWARE
bool "Allow to specify an EDID data set instead of probing for it"
depends on DRM_KMS_HELPER
diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
index 2c239b9..c1d44b2 100644
--- a/drivers/gpu/drm/Makefile
+++ b/drivers/gpu/drm/Makefile
@@ -25,7 +25,11 @@ drm-$(CONFIG_OF) += drm_of.o
drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \
drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o
drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o
+
+ifeq ($(CONFIG_DRM_FBDEV_EMULATION),y)
drm_kms_helper-$(CONFIG_DRM_KMS_FB_HELPER) += drm_fb_helper.o
+endif
This should work as
drm_kms_helper-$CONFIG_DRM_FBDEV_EMULATION += drm_fb_helper.o
since both <modename>-y and <modename>-m are merged together.
Ah right. I'll fix that.
Archit
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
