Re: [PATCH 4/4] drm/msm/mdp5: Make the intf connection in config module

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> Hi,

Hi Archit,

>
> On 03/04/2015 12:06 AM, Stephane Viau wrote:
>> Up until now, we assume that eDP is tight to intf_0 and HDMI to
>> intf_3. This information shall actually come from the mdp5_cfg
>> module since it can change from one chip to another.
>>
>> Signed-off-by: Stephane Viau <sviau@xxxxxxxxxxxxxx>
>> ---
>>   drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c |   8 +++
>>   drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.h |   4 ++
>>   drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c | 111
>> ++++++++++++++++++--------------
>>   3 files changed, 74 insertions(+), 49 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c
>> b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c
>> index 72c075a..8bee023 100644
>> --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c
>> +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.c
>> @@ -62,6 +62,10 @@ const struct mdp5_cfg_hw msm8x74_config = {
>>   		.count = 4,
>>   		.base = { 0x12500, 0x12700, 0x12900, 0x12b00 },
>>   	},
>> +	.intfs = {
>> +		[0] = INTF_eDP,
>> +		[3] = INTF_HDMI,
>> +	},
>>   	.max_clk = 200000000,
>>   };
>>
>> @@ -111,6 +115,10 @@ const struct mdp5_cfg_hw apq8084_config = {
>>   		.count = 5,
>>   		.base = { 0x12500, 0x12700, 0x12900, 0x12b00, 0x12d00 },
>>   	},
>> +	.intfs = {
>> +		[0] = INTF_eDP,
>> +		[3] = INTF_HDMI,
>> +	},
>>   	.max_clk = 320000000,
>>   };
>>
>> diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.h
>> b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.h
>> index be149b3..4e91f14 100644
>> --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.h
>> +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_cfg.h
>> @@ -58,6 +58,8 @@ struct mdp5_smp_block {
>>   	int reserved[MAX_CLIENTS];	/* # of MMBs allocated per client */
>>   };
>>
>> +#define MDP5_INTF_NUM_MAX	5
>> +
>>   struct mdp5_cfg_hw {
>>   	char  *name;
>>
>> @@ -71,6 +73,8 @@ struct mdp5_cfg_hw {
>>   	struct mdp5_sub_block ad;
>>   	struct mdp5_sub_block intf;
>>
>> +	u32 intfs[MDP5_INTF_NUM_MAX]; /* array of enum mdp5_intf_type */
>> +
>
> The array type could be "enum mdp5_intf_type" rather than u32.
>

The problem here is that mdp5_cfg.h must be included before mdp5.xml.h
(see mdp5_kms.h #24) so that mdp5_cfg pointer can be resolved in the
latter.
mdp5_cfg.h hence cannot use any types defined in mdp5.xml.h, including
'enum mdp5_intf_type'.

>>   	uint32_t max_clk;
>>   };
>>
>> diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c
>> b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c
>> index 390d9d2..8cec00e 100644
>> --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c
>> +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_kms.c
>> @@ -161,6 +161,44 @@ int mdp5_enable(struct mdp5_kms *mdp5_kms)
>>   	return 0;
>>   }
>>
>> +static int construct_encoder(struct mdp5_kms *mdp5_kms,
>> +		enum mdp5_intf_type intf_type, int intf_num)
>> +{
>> +	struct drm_device *dev = mdp5_kms->dev;
>> +	struct msm_drm_private *priv = dev->dev_private;
>> +	struct drm_encoder *encoder;
>> +	struct mdp5_interface intf = {
>> +			.num	= intf_num,
>> +			.type	= intf_type,
>> +			.mode	= MDP5_INTF_MODE_NONE,
>> +	};
>> +	int ret = 0;
>> +
>> +	encoder = mdp5_encoder_init(dev, &intf);
>> +	if (IS_ERR(encoder)) {
>> +		ret = PTR_ERR(encoder);
>> +		dev_err(dev->dev, "failed to construct encoder: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	encoder->possible_crtcs = (1 << priv->num_crtcs) - 1;
>> +	priv->encoders[priv->num_encoders++] = encoder;
>> +
>> +	if (intf_type == INTF_HDMI) {
>> +		ret = hdmi_modeset_init(priv->hdmi, dev, encoder);
>> +		if (ret)
>> +			dev_err(dev->dev, "failed to init HDMI: %d\n", ret);
>> +
>> +	} else if (intf_type == INTF_eDP) {
>> +		/* Construct bridge/connector for eDP: */
>> +		ret = msm_edp_modeset_init(priv->edp, dev, encoder);
>> +		if (ret)
>> +			dev_err(dev->dev, "failed to init eDP: %d\n", ret);
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>>   static int modeset_init(struct mdp5_kms *mdp5_kms)
>>   {
>>   	static const enum mdp5_pipe crtcs[] = {
>> @@ -171,7 +209,6 @@ static int modeset_init(struct mdp5_kms *mdp5_kms)
>>   	};
>>   	struct drm_device *dev = mdp5_kms->dev;
>>   	struct msm_drm_private *priv = dev->dev_private;
>> -	struct drm_encoder *encoder;
>>   	const struct mdp5_cfg_hw *hw_cfg;
>>   	int i, ret;
>>
>> @@ -222,56 +259,29 @@ static int modeset_init(struct mdp5_kms *mdp5_kms)
>>   		}
>>   	}
>>
>> -	if (priv->hdmi) {
>> -		struct mdp5_interface intf = {
>> -				.num	= 3,
>> -				.type	= INTF_HDMI,
>> -				.mode	= MDP5_INTF_MODE_NONE,
>> -		};
>> -
>> -		/* Construct encoder for HDMI: */
>> -		encoder = mdp5_encoder_init(dev, &intf);
>> -		if (IS_ERR(encoder)) {
>> -			dev_err(dev->dev, "failed to construct encoder\n");
>> -			ret = PTR_ERR(encoder);
>> -			goto fail;
>> -		}
>> -
>> -		encoder->possible_crtcs = (1 << priv->num_crtcs) - 1;;
>> -		priv->encoders[priv->num_encoders++] = encoder;
>> -
>> -		ret = hdmi_modeset_init(priv->hdmi, dev, encoder);
>> -		if (ret) {
>> -			dev_err(dev->dev, "failed to initialize HDMI: %d\n", ret);
>> -			goto fail;
>> -		}
>> -	}
>> -
>> -	if (priv->edp) {
>> -		struct mdp5_interface intf = {
>> -				.num	= 0,
>> -				.type	= INTF_eDP,
>> -				.mode	= MDP5_INTF_MODE_NONE,
>> -		};
>> -
>> -		/* Construct encoder for eDP: */
>> -		encoder = mdp5_encoder_init(dev, &intf);
>> -		if (IS_ERR(encoder)) {
>> -			dev_err(dev->dev, "failed to construct eDP encoder\n");
>> -			ret = PTR_ERR(encoder);
>> -			goto fail;
>> +	/* Construct external display interfaces' encoders: */
>> +	for (i = 0; i < ARRAY_SIZE(hw_cfg->intfs); i++) {
>> +		enum mdp5_intf_type intf_type = hw_cfg->intfs[i];
>> +
>> +		switch (intf_type) {
>> +		case INTF_DISABLED:
>> +			break;
>> +		case INTF_eDP:
>> +			if (priv->edp)
>> +				ret = construct_encoder(mdp5_kms, INTF_eDP, i);
>> +			break;
>> +		case INTF_HDMI:
>> +			if (priv->hdmi)
>> +				ret = construct_encoder(mdp5_kms, INTF_HDMI, i);
>> +			break;
>> +		default:
>> +			dev_err(dev->dev, "unknown intf: %d\n", intf_type);
>> +			ret = -EINVAL;
>> +			break;
>>   		}
>>
>> -		encoder->possible_crtcs = (1 << priv->num_crtcs) - 1;
>> -		priv->encoders[priv->num_encoders++] = encoder;
>> -
>> -		/* Construct bridge/connector for eDP: */
>> -		ret = msm_edp_modeset_init(priv->edp, dev, encoder);
>> -		if (ret) {
>> -			dev_err(dev->dev, "failed to initialize eDP: %d\n",
>> -									ret);
>> +		if (ret)
>>   			goto fail;
>> -		}
>>   	}
>>
>>   	return 0;
>> @@ -415,8 +425,11 @@ struct msm_kms *mdp5_kms_init(struct drm_device
>> *dev)
>>   	 * we don't disable):
>>   	 */
>>   	mdp5_enable(mdp5_kms);
>> -	for (i = 0; i < config->hw->intf.count; i++)
>> +	for (i = 0; i < MDP5_INTF_NUM_MAX; i++) {
>> +		if (MDP5_INTF_IS_VIRTUAL_DISPLAY(config->hw->intfs[i]))
>> +			continue;
>
> This may not be sufficient to prevent register writes to interfaces that
> don't exist. We'd probably need:
>
> 	if(MDP5_INTF_IS_VIRTUAL_DISPLAY(config->hw->intfs[i]) ||
> 			config->hw->intfs[i] == INTF_DISABLED)
> 		continue;
>

We actually need to disable all display interfaces even though they are
not listed as "enabled". If we do not do so, we get faults[1].
As you mentioned, it shouldn't harm to write 0 in non existent interfaces'
registers.

[1] http://www.hastebin.com/raw/dekaqaboju

>>   		mdp5_write(mdp5_kms, REG_MDP5_INTF_TIMING_ENGINE_EN(i), 0);
>> +	}
>
> Writing to registers for a non existent interface shouldn't do any harm,
> but it's best to be safe :)
>
>>   	mdp5_disable(mdp5_kms);
>>   	mdelay(16);
>>
>>
>
> Thanks,
> Archit
>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm"
> in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

Thanks,
Stéphane.

-- 
Qualcomm Innovation Center, Inc.

The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux