From: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
This patch changes the order to:
- write CTS3 CTS_manual (if supported) | N_shift | CTS[19:16]
- write CTS2 CTS[15:8]
- write CTS1 CTS[7:0]
- write N3 N[19:16]
- write N2 N[15:8]
- write N1 N[7:0]
Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
Signed-off-by: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
---
Changes in v4:
- Combine CTS3 registers setting, reduce register operate times
Changes in v3:
- Only adjust the n/cts setting order
Changes in v2: None
drivers/gpu/drm/bridge/dw_hdmi.c | 25 +++++++++++++++----------
drivers/gpu/drm/bridge/dw_hdmi.h | 6 ++++--
2 files changed, 19 insertions(+), 12 deletions(-)
diff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c
index 3d7c048..12d8b7e 100644
--- a/drivers/gpu/drm/bridge/dw_hdmi.c
+++ b/drivers/gpu/drm/bridge/dw_hdmi.c
@@ -199,19 +199,24 @@ static void hdmi_mask_writeb(struct dw_hdmi *hdmi, u8 data, unsigned int reg,
static void hdmi_set_clock_regenerator(struct dw_hdmi *hdmi,
unsigned int n, unsigned int cts)
{
- hdmi_writeb(hdmi, n & 0xff, HDMI_AUD_N1);
- hdmi_writeb(hdmi, (n >> 8) & 0xff, HDMI_AUD_N2);
- hdmi_writeb(hdmi, (n >> 16) & 0x0f, HDMI_AUD_N3);
+ u8 cts3 = 0;
- /* nshift factor = 0 */
- hdmi_modb(hdmi, 0, HDMI_AUD_CTS3_N_SHIFT_MASK, HDMI_AUD_CTS3);
- /* Must be set/cleared first */
- hdmi_modb(hdmi, 0, HDMI_AUD_CTS3_CTS_MANUAL, HDMI_AUD_CTS3);
+ /* set CTS_MANUAL (if present) */
+ if (hdmi->id.design == 0x20)
+ cts3 = HDMI_AUD_CTS3_CTS_MANUAL;
- hdmi_writeb(hdmi, cts & 0xff, HDMI_AUD_CTS1);
+ cts3 |= HDMI_AUD_CTS3_N_SHIFT_1 << HDMI_AUD_CTS3_N_SHIFT_OFFSET;
+ cts3 |= (cts >> 16) & HDMI_AUD_CTS3_AUDCTS19_16_MASK;
+
+ /* write CTS values; CTS3 must be written first */
+ hdmi_writeb(hdmi, cts3, HDMI_AUD_CTS3);
hdmi_writeb(hdmi, (cts >> 8) & 0xff, HDMI_AUD_CTS2);
- hdmi_writeb(hdmi, ((cts >> 16) & HDMI_AUD_CTS3_AUDCTS19_16_MASK) |
- HDMI_AUD_CTS3_CTS_MANUAL, HDMI_AUD_CTS3);
+ hdmi_writeb(hdmi, cts & 0xff, HDMI_AUD_CTS1);
+
+ /* write N values; N1 must be written last */
+ hdmi_writeb(hdmi, (n >> 16) & 0xf, HDMI_AUD_N3);
+ hdmi_writeb(hdmi, (n >> 8) & 0xff, HDMI_AUD_N2);
+ hdmi_writeb(hdmi, n & 0xff, HDMI_AUD_N1);
}
static unsigned int hdmi_compute_n(unsigned int freq, unsigned long pixel_clk,
diff --git a/drivers/gpu/drm/bridge/dw_hdmi.h b/drivers/gpu/drm/bridge/dw_hdmi.h
index e4ba634..c7ac538 100644
--- a/drivers/gpu/drm/bridge/dw_hdmi.h
+++ b/drivers/gpu/drm/bridge/dw_hdmi.h
@@ -916,8 +916,10 @@ enum {
HDMI_AUD_CTS3_N_SHIFT_64 = 0x60,
HDMI_AUD_CTS3_N_SHIFT_128 = 0x80,
HDMI_AUD_CTS3_N_SHIFT_256 = 0xa0,
- /* note that the CTS3 MANUAL bit has been removed
- from our part. Can't set it, will read as 0. */
+ /*
+ * Note: CTS_MANUAL is not present on iMX6 dw_hdmi, but is present on
+ * rk3288 (design_id = 0x20).
+ */
HDMI_AUD_CTS3_CTS_MANUAL = 0x10,
HDMI_AUD_CTS3_AUDCTS19_16_MASK = 0x0f,
--
2.1.2
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
