Re: [PATCH v2] drm/dp: add DPCD definitions from DP 1.1 and 1.2a

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Apologies, this was supposed to be in reply to
http://mid.gmane.org/54EEECC9.4010902@xxxxxxxxx


On Fri, 27 Feb 2015, Jani Nikula <jani.nikula@xxxxxxxxx> wrote:
> Add a number of DPCD definitions from DP 1.1 and 1.2a.
>
> v2: drop wrong DP version reference, rename DP training set macros
> (Sonika).
>
> Reviewed-by: Sonika Jindal <sonika.jindal@xxxxxxxxx>
> Signed-off-by: Jani Nikula <jani.nikula@xxxxxxxxx>
> ---
>  include/drm/drm_dp_helper.h | 93 ++++++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 88 insertions(+), 5 deletions(-)
>
> diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
> index a3ecaa06c9db..319d5edfb3b5 100644
> --- a/include/drm/drm_dp_helper.h
> +++ b/include/drm/drm_dp_helper.h
> @@ -92,6 +92,15 @@
>  # define DP_MSA_TIMING_PAR_IGNORED	    (1 << 6) /* eDP */
>  # define DP_OUI_SUPPORT			    (1 << 7)
>  
> +#define DP_RECEIVE_PORT_0_CAP_0		    0x008
> +# define DP_LOCAL_EDID_PRESENT		    (1 << 1)
> +# define DP_ASSOCIATED_TO_PRECEDING_PORT    (1 << 2)
> +
> +#define DP_RECEIVE_PORT_0_BUFFER_SIZE	    0x009
> +
> +#define DP_RECEIVE_PORT_1_CAP_0		    0x00a
> +#define DP_RECEIVE_PORT_1_BUFFER_SIZE       0x00b
> +
>  #define DP_I2C_SPEED_CAP		    0x00c    /* DPI */
>  # define DP_I2C_SPEED_1K		    0x01
>  # define DP_I2C_SPEED_5K		    0x02
> @@ -101,10 +110,16 @@
>  # define DP_I2C_SPEED_1M		    0x20
>  
>  #define DP_EDP_CONFIGURATION_CAP            0x00d   /* XXX 1.2? */
> +# define DP_ALTERNATE_SCRAMBLER_RESET_CAP   (1 << 0)
> +# define DP_FRAMING_CHANGE_CAP		    (1 << 1)
>  # define DP_DPCD_DISPLAY_CONTROL_CAPABLE     (1 << 3) /* edp v1.2 or higher */
>  
>  #define DP_TRAINING_AUX_RD_INTERVAL         0x00e   /* XXX 1.2? */
>  
> +#define DP_ADAPTER_CAP			    0x00f   /* 1.2 */
> +# define DP_FORCE_LOAD_SENSE_CAP	    (1 << 0)
> +# define DP_ALTERNATE_I2C_PATTERN_CAP	    (1 << 1)
> +
>  #define DP_SUPPORTED_LINK_RATES		    0x010 /* eDP 1.4 */
>  # define DP_MAX_SUPPORTED_RATES		     8	    /* 16-bit little-endian */
>  
> @@ -115,6 +130,44 @@
>  #define DP_MSTM_CAP			    0x021   /* 1.2 */
>  # define DP_MST_CAP			    (1 << 0)
>  
> +#define DP_NUMBER_OF_AUDIO_ENDPOINTS	    0x022   /* 1.2 */
> +
> +/* AV_SYNC_DATA_BLOCK                                  1.2 */
> +#define DP_AV_GRANULARITY		    0x023
> +# define DP_AG_FACTOR_MASK		    (0xf << 0)
> +# define DP_AG_FACTOR_3MS		    (0 << 0)
> +# define DP_AG_FACTOR_2MS		    (1 << 0)
> +# define DP_AG_FACTOR_1MS		    (2 << 0)
> +# define DP_AG_FACTOR_500US		    (3 << 0)
> +# define DP_AG_FACTOR_200US		    (4 << 0)
> +# define DP_AG_FACTOR_100US		    (5 << 0)
> +# define DP_AG_FACTOR_10US		    (6 << 0)
> +# define DP_AG_FACTOR_1US		    (7 << 0)
> +# define DP_VG_FACTOR_MASK		    (0xf << 4)
> +# define DP_VG_FACTOR_3MS		    (0 << 4)
> +# define DP_VG_FACTOR_2MS		    (1 << 4)
> +# define DP_VG_FACTOR_1MS		    (2 << 4)
> +# define DP_VG_FACTOR_500US		    (3 << 4)
> +# define DP_VG_FACTOR_200US		    (4 << 4)
> +# define DP_VG_FACTOR_100US		    (5 << 4)
> +
> +#define DP_AUD_DEC_LAT0			    0x024
> +#define DP_AUD_DEC_LAT1			    0x025
> +
> +#define DP_AUD_PP_LAT0			    0x026
> +#define DP_AUD_PP_LAT1			    0x027
> +
> +#define DP_VID_INTER_LAT		    0x028
> +
> +#define DP_VID_PROG_LAT			    0x029
> +
> +#define DP_REP_LAT			    0x02a
> +
> +#define DP_AUD_DEL_INS0			    0x02b
> +#define DP_AUD_DEL_INS1			    0x02c
> +#define DP_AUD_DEL_INS2			    0x02d
> +/* End of AV_SYNC_DATA_BLOCK */
> +
>  #define DP_GUID				    0x030   /* 1.2 */
>  
>  #define DP_PSR_SUPPORT                      0x070   /* XXX 1.2? */
> @@ -173,11 +226,12 @@
>  # define DP_TRAINING_PATTERN_3		    3	    /* 1.2 */
>  # define DP_TRAINING_PATTERN_MASK	    0x3
>  
> -# define DP_LINK_QUAL_PATTERN_DISABLE	    (0 << 2)
> -# define DP_LINK_QUAL_PATTERN_D10_2	    (1 << 2)
> -# define DP_LINK_QUAL_PATTERN_ERROR_RATE    (2 << 2)
> -# define DP_LINK_QUAL_PATTERN_PRBS7	    (3 << 2)
> -# define DP_LINK_QUAL_PATTERN_MASK	    (3 << 2)
> +/* DPCD 1.1 only. For DPCD >= 1.2 see per-lane DP_LINK_QUAL_LANEn_SET */
> +# define DP_LINK_QUAL_PATTERN_11_DISABLE    (0 << 2)
> +# define DP_LINK_QUAL_PATTERN_11_D10_2	    (1 << 2)
> +# define DP_LINK_QUAL_PATTERN_11_ERROR_RATE (2 << 2)
> +# define DP_LINK_QUAL_PATTERN_11_PRBS7	    (3 << 2)
> +# define DP_LINK_QUAL_PATTERN_11_MASK	    (3 << 2)
>  
>  # define DP_RECOVERED_CLOCK_OUT_EN	    (1 << 4)
>  # define DP_LINK_SCRAMBLING_DISABLE	    (1 << 5)
> @@ -220,14 +274,43 @@
>  /* bitmask as for DP_I2C_SPEED_CAP */
>  
>  #define DP_EDP_CONFIGURATION_SET            0x10a   /* XXX 1.2? */
> +# define DP_ALTERNATE_SCRAMBLER_RESET_ENABLE (1 << 0)
> +# define DP_FRAMING_CHANGE_ENABLE	    (1 << 1)
> +# define DP_PANEL_SELF_TEST_ENABLE	    (1 << 7)
> +
> +#define DP_LINK_QUAL_LANE0_SET		    0x10b   /* DPCD >= 1.2 */
> +#define DP_LINK_QUAL_LANE1_SET		    0x10c
> +#define DP_LINK_QUAL_LANE2_SET		    0x10d
> +#define DP_LINK_QUAL_LANE3_SET		    0x10e
> +# define DP_LINK_QUAL_PATTERN_DISABLE	    0
> +# define DP_LINK_QUAL_PATTERN_D10_2	    1
> +# define DP_LINK_QUAL_PATTERN_ERROR_RATE    2
> +# define DP_LINK_QUAL_PATTERN_PRBS7	    3
> +# define DP_LINK_QUAL_PATTERN_80BIT_CUSTOM  4
> +# define DP_LINK_QUAL_PATTERN_HBR2_EYE      5
> +# define DP_LINK_QUAL_PATTERN_MASK	    7
> +
> +#define DP_TRAINING_LANE0_1_SET2	    0x10f
> +#define DP_TRAINING_LANE2_3_SET2	    0x110
> +# define DP_LANE02_POST_CURSOR2_SET_MASK    (3 << 0)
> +# define DP_LANE02_MAX_POST_CURSOR2_REACHED (1 << 2)
> +# define DP_LANE13_POST_CURSOR2_SET_MASK    (3 << 4)
> +# define DP_LANE13_MAX_POST_CURSOR2_REACHED (1 << 6)
>  
>  #define DP_MSTM_CTRL			    0x111   /* 1.2 */
>  # define DP_MST_EN			    (1 << 0)
>  # define DP_UP_REQ_EN			    (1 << 1)
>  # define DP_UPSTREAM_IS_SRC		    (1 << 2)
>  
> +#define DP_AUDIO_DELAY0			    0x112   /* 1.2 */
> +#define DP_AUDIO_DELAY1			    0x113
> +#define DP_AUDIO_DELAY2			    0x114
> +
>  #define DP_LINK_RATE_SET		    0x115   /* eDP 1.4 */
>  
> +#define DP_UPSTREAM_DEVICE_DP_PWR_NEED	    0x118   /* 1.2 */
> +# define DP_PWR_NOT_NEEDED		    (1 << 0)
> +
>  #define DP_PSR_EN_CFG			    0x170   /* XXX 1.2? */
>  # define DP_PSR_ENABLE			    (1 << 0)
>  # define DP_PSR_MAIN_LINK_ACTIVE	    (1 << 1)
> -- 
> 2.1.4
>

-- 
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux