The DDC error interrupt bit is located in REG_INT1, not REG_INT0. Update
both the interrupt wait code and the interrupt sources reset code
accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i2c/adv7511.c | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c
index fa140e04d5fa..5109c215018e 100644
--- a/drivers/gpu/drm/i2c/adv7511.c
+++ b/drivers/gpu/drm/i2c/adv7511.c
@@ -467,14 +467,16 @@ static int adv7511_get_edid_block(void *data, u8 *buf, unsigned int block,
block);
ret = adv7511_wait_for_interrupt(adv7511,
ADV7511_INT0_EDID_READY |
- ADV7511_INT1_DDC_ERROR, 200);
+ (ADV7511_INT1_DDC_ERROR << 8), 200);
if (!(ret & ADV7511_INT0_EDID_READY))
return -EIO;
}
regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
- ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR);
+ ADV7511_INT0_EDID_READY);
+ regmap_write(adv7511->regmap, ADV7511_REG_INT(1),
+ ADV7511_INT1_DDC_ERROR);
/* Break this apart, hopefully more I2C controllers will
* support 64 byte transfers than 256 byte transfers
@@ -528,7 +530,9 @@ static int adv7511_get_modes(struct drm_encoder *encoder,
/* Reading the EDID only works if the device is powered */
if (adv7511->dpms_mode != DRM_MODE_DPMS_ON) {
regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
- ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR);
+ ADV7511_INT0_EDID_READY);
+ regmap_write(adv7511->regmap, ADV7511_REG_INT(1),
+ ADV7511_INT1_DDC_ERROR);
regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
ADV7511_POWER_POWER_DOWN, 0);
adv7511->current_edid_segment = -1;
@@ -563,7 +567,9 @@ static void adv7511_encoder_dpms(struct drm_encoder *encoder, int mode)
adv7511->current_edid_segment = -1;
regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
- ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR);
+ ADV7511_INT0_EDID_READY);
+ regmap_write(adv7511->regmap, ADV7511_REG_INT(1),
+ ADV7511_INT1_DDC_ERROR);
regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
ADV7511_POWER_POWER_DOWN, 0);
/*
--
2.0.5
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
