On Fri, 2015-02-13 at 19:03 +0800, Jianwei Wang wrote:
> Add DCU node, DCU is a display controller of Freescale
> named 2D-ACE.
>
> Signed-off-by: Alison Wang <b18965@xxxxxxxxxxxxx>
> Signed-off-by: Xiubo Li <lixiubo@xxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Jianwei Wang <b52261@xxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/ls1021a.dtsi | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
> index c70bb27..28c37f1 100644
> --- a/arch/arm/boot/dts/ls1021a.dtsi
> +++ b/arch/arm/boot/dts/ls1021a.dtsi
> @@ -383,6 +383,17 @@
> <&platform_clk 1>;
> };
>
> + dcfb: dcfb@2ce0000 {
> + compatible = "fsl,ls1021a-dcfb";
> + reg = <0x0 0x2ce0000 0x0 0x10000>;
> + interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&platform_clk 0>;
> + clock-names = "dcfb";
> + scfg-controller = <&scfg>;
> + big-endian;
> + status = "disabled";
> + };
I don't see "big-endian" in the dcfb binding.
-Scott
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
