[PATCH v4 00/11] Improvements to Tegra-based Chromebook support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



v4:	* Added support for the system reset GPIO, for proper reboots
	* Moved out changes to ASOC to their own series, as requested by Mark
	Brown
	* Added patch to reset the SOR, to make sure it's in a known state
	* Changed nvidia,model property of the sound nodes to GoogleNyanBig
	and GoogleNyanBlaze so they can be told apart in userspace

v3:	* Added bindings for the LTN140AT29 panel
	* Removed the delay in pwrseq, as what was actually needed was to add
	a dependency on the power supplies of the host
	* Uses the pinmux for the Blaze as generated by tegra-pinmux-scripts
	* Uses the pinmux for the Big as in the last patch from Simon Glass

Hello,

this series adds support for the Tegra-based HP Chromebook 14 (aka nyan
blaze), which is very similar to the Acer Chromebook 13 (aka nyan big).
Because they both include tegra124-nyan.dtsi, some improvements to Blaze
support have also benefitted the Big. I have tested that USB2, the panels,
HDMI, the trackpad, Wifi and sound work on both.

The DT for the Big includes the pinmux configuration as generated by
tegra-pinmux-scripts with Simon's patch at:

https://patchwork.ozlabs.org/patch/417779/

These patches are based on top of linux-next 20150211.

http://cgit.collabora.com/git/user/tomeu/linux.git/log/?h=nyan-v4

Regards,

Tomeu

Andrew Bresticker (1):
  ARM: tegra: add support for warm reset GPIO

Stéphane Marchesin (1):
  drm/panel: add support for Samsung LTN140AT29 panel

Tomeu Vizoso (9):
  ARM: tegra: Change model of sound card in Nyan Big
  ARM: tegra: Move out nyan-generic parts out from the nyan-big DT
  ARM: tegra: Add DTS for the nyan-blaze board
  ARM: tegra: Add node for trackpad in Nyan boards
  ARM: tegra: Use pwrseq-simple for the wifi in Nyan
  ARM: tegra: Use the generated pinmux data
  ARM: tegra: Set spi-max-frequency property to flash node
  ARM: tegra: Set nvidia,reset-gpio property on the PMC node
  drm/tegra: Reset the SOR on probe

 .../bindings/arm/tegra/nvidia,tegra20-pmc.txt      |    1 +
 .../bindings/panel/samsung,ltn140at29-301.txt      |    7 +
 arch/arm/boot/dts/Makefile                         |    1 +
 arch/arm/boot/dts/tegra124-nyan-big.dts            | 2119 +++++++++++---------
 arch/arm/boot/dts/tegra124-nyan-blaze.dts          | 1332 ++++++++++++
 arch/arm/boot/dts/tegra124-nyan.dtsi               |  689 +++++++
 drivers/gpu/drm/panel/panel-simple.c               |   26 +
 drivers/gpu/drm/tegra/sor.c                        |   14 +
 drivers/soc/tegra/pmc.c                            |   33 +
 9 files changed, 3261 insertions(+), 961 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/panel/samsung,ltn140at29-301.txt
 create mode 100644 arch/arm/boot/dts/tegra124-nyan-blaze.dts
 create mode 100644 arch/arm/boot/dts/tegra124-nyan.dtsi

-- 
1.9.3

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux