Re: [PATCH] drm/exynos: don' disable hdmi clocks for exynos5420

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



+Cc dri-devel ML,

Hi,

On 01/31/2015 06:45 AM, Gustavo Padovan wrote:
> From: Prathyush K <prathyush.k@xxxxxxxxxxx>
> 
> When VPLL clock of less than 140 MHz was used and all the three
> clocks - hdmiphy, hdmi, sclk_hdmi are disabled, the system hangs
> during S2R when HDMI is connected. Since we want to use a vpll
> clock of 70.5 MHz, we cannot disable these 3 clocks before suspending.
> This patch moves the clk enable/disable of hdmi and sclk_hdmi
> outside of the pm ops. Now system suspends and resumes with HDMI
> connected with VPLL set at 70.5 MHz.
> 

I think commit messages should be updated because it is different with
prior posting codes.

Thanks.

> Signed-off-by: Prathyush K <prathyush.k@xxxxxxxxxxx>
> Signed-off-by: Andrew Bresticker <abrestic@xxxxxxxxxxxx>
> Signed-off-by: Gustavo Padovan <gustavo.padovan@xxxxxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/exynos/exynos_hdmi.c | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
> 
> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
> index 6aa0d65..0be6921 100644
> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c
> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
> @@ -2254,6 +2254,20 @@ static int hdmi_resources_init(struct hdmi_context *hdata)
>  	} else
>  		res->reg_hdmi_en = NULL;
>  
> +	/*
> +	 * For these two clocks exynos5420 fails to suspend if VPLL clock of
> +	 * 70.5 MHz is used and these clocks are disabled before suspend. So
> +	 * enable them here.
> +	 * Note that this will keep the clocks enabled for the entire
> +	 * lifetime of the driver and waste energy when it is suspended.
> +	 * However it prevents the system crash until a better solution is
> +	 * found
> +	 */
> +	if (of_machine_is_compatible("samsung,exynos5420")) {

I'm not sure it's ok to use SoC compatible in driver and doesn't
exynos5800 also have same issue?

How about just use driver_data?

Thanks.

> +		clk_prepare_enable(res->sclk_hdmi);
> +		clk_prepare_enable(res->hdmi);
> +	}
> +
>  	return ret;
>  fail:
>  	DRM_ERROR("HDMI resource init - failed\n");
> @@ -2516,6 +2530,11 @@ static int hdmi_remove(struct platform_device *pdev)
>  	if (hdata->res.reg_hdmi_en)
>  		regulator_disable(hdata->res.reg_hdmi_en);
>  
> +	if (of_machine_is_compatible("samsung,exynos5420")) {
> +		clk_disable_unprepare(hdata->res.sclk_hdmi);
> +		clk_disable_unprepare(hdata->res.hdmi);
> +	}
> +
>  	if (hdata->hdmiphy_port)
>  		put_device(&hdata->hdmiphy_port->dev);
>  	put_device(&hdata->ddc_adpt->dev);
> 

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux