Align compatible strings for several IP blocks present on Tegra chips with the latest doctrine from the DT maintainers: http://marc.info/?l=devicetree&m=142255654213019&w=2 The primary objective here is to avoid checkpatch warnings, per: http://marc.info/?l=linux-tegra&m=142201349727836&w=2 DT binding text files have been updated for the following IP blocks: - PCIe - SOR - SoC timers - AHB "gizmo" - APB_MISC - pinmux control - UART - PWM - I2C - SPI - RTC - PMC - eFuse - AHCI - HDA - XUSB_PADCTRL - SDHCI - SOC_THERM - AHUB - I2S - EHCI - USB PHY N.B. The nvidia,tegra20-timer compatible string is removed from the nvidia,tegra30-timer.txt documentation file because it's already mentioned in the nvidia,tegra20-timer.txt documentation file. This second version takes into account the following requests from Rob Herring <robherring2@xxxxxxxxx>: - Per-IP block patches have been combined into a single patch - Explicit documentation about which compatible strings are actually matched by the driver has been removed. In its place is implicit documentation that loosely follows Rob's prescribed format: "Must contain '"nvidia,<chip>-pcie", "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ..." [...] "You should attempt to document known values of <chip> if you use it" Signed-off-by: Paul Walmsley <paul@xxxxxxxxx> Cc: Alexandre Courbot <gnurou@xxxxxxxxx> Cc: Dylan Reid <dgreid@xxxxxxxxxxxx> Cc: Eduardo Valentin <edubezval@xxxxxxxxx> Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Cc: Hans de Goede <hdegoede@xxxxxxxxxx> Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx> Cc: Jingchang Lu <jingchang.lu@xxxxxxxxxxxxx> Cc: John Crispin <blogic@xxxxxxxxxxx> Cc: Kumar Gala <galak@xxxxxxxxxxxxxx> Cc: Linus Walleij <linus.walleij@xxxxxxxxxx> Cc: Mark Rutland <mark.rutland@xxxxxxx> Cc: Mikko Perttunen <mperttunen@xxxxxxxxxx> Cc: Murali Karicheri <m-karicheri2@xxxxxx> Cc: Paul Walmsley <pwalmsley@xxxxxxxxxx> Cc: Pawel Moll <pawel.moll@xxxxxxx> Cc: Peter De Schrijver <pdeschrijver@xxxxxxxxxx> Cc: Peter Hurley <peter@xxxxxxxxxxxxxxxxxx> Cc: Rob Herring <robh+dt@xxxxxxxxxx> Cc: Sean Paul <seanpaul@xxxxxxxxxxxx> Cc: Stephen Warren <swarren@xxxxxxxxxxxxx> Cc: Takashi Iwai <tiwai@xxxxxxx> Cc: Tejun Heo <tj@xxxxxxxxxx> Cc: "Terje Bergström" <tbergstrom@xxxxxxxxxx> Cc: Thierry Reding <thierry.reding@xxxxxxxxx> Cc: Tuomas Tynkkynen <ttynkkynen@xxxxxxxxxx> Cc: Wolfram Sang <wsa@xxxxxxxxxxxxx> Cc: Zhang Rui <rui.zhang@xxxxxxxxx> Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx Cc: linux-i2c@xxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx Cc: linux-pci@xxxxxxxxxxxxxxx Cc: linux-pm@xxxxxxxxxxxxxxx Cc: linux-pwm@xxxxxxxxxxxxxxx Cc: linux-tegra@xxxxxxxxxxxxxxx --- .../bindings/arm/tegra/nvidia,tegra20-ahb.txt | 5 ++++- .../bindings/arm/tegra/nvidia,tegra20-pmc.txt | 6 +++++- .../devicetree/bindings/ata/tegra-sata.txt | 4 +++- .../bindings/fuse/nvidia,tegra20-fuse.txt | 10 +++++----- .../bindings/gpu/nvidia,tegra20-host1x.txt | 8 ++++++-- .../devicetree/bindings/i2c/nvidia,tegra20-i2c.txt | 10 +++++----- .../bindings/misc/nvidia,tegra20-apbmisc.txt | 9 ++++----- .../bindings/mmc/nvidia,tegra20-sdhci.txt | 6 +++++- .../bindings/pci/nvidia,tegra20-pcie.txt | 8 ++++---- .../bindings/pinctrl/nvidia,tegra124-pinmux.txt | 3 ++- .../pinctrl/nvidia,tegra124-xusb-padctl.txt | 4 +++- .../devicetree/bindings/pwm/nvidia,tegra20-pwm.txt | 7 ++++--- .../devicetree/bindings/rtc/nvidia,tegra20-rtc.txt | 4 +++- .../devicetree/bindings/serial/of-serial.txt | 5 ++++- .../bindings/sound/nvidia,tegra30-ahub.txt | 5 ++++- .../bindings/sound/nvidia,tegra30-hda.txt | 4 +++- .../bindings/sound/nvidia,tegra30-i2s.txt | 5 ++++- .../bindings/spi/nvidia,tegra114-spi.txt | 4 +++- .../devicetree/bindings/thermal/tegra-soctherm.txt | 4 +++- .../bindings/timer/nvidia,tegra30-timer.txt | 4 +++- .../bindings/usb/nvidia,tegra20-ehci.txt | 5 ++++- .../bindings/usb/nvidia,tegra20-usb-phy.txt | 5 ++++- 22 files changed, 85 insertions(+), 40 deletions(-) diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt index 234406d41c12..067c9790062f 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-ahb.txt @@ -1,7 +1,10 @@ NVIDIA Tegra AHB Required properties: -- compatible : "nvidia,tegra20-ahb" or "nvidia,tegra30-ahb" +- compatible : For Tegra20, must contain "nvidia,tegra20-ahb". For + Tegra30, must contain "nvidia,tegra30-ahb". Otherwise, must contain + '"nvidia,<chip>-ahb", "nvidia,tegra30-ahb"' where <chip> is tegra124, + tegra132, or tegra210. - reg : Should contain 1 register ranges(address and length) Example: diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt index 68ac65f82a1c..dd75b972ee37 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt @@ -6,7 +6,11 @@ modes. It provides power-gating controllers for SoC and CPU power-islands. Required properties: - name : Should be pmc -- compatible : Should contain "nvidia,tegra<chip>-pmc". +- compatible : For Tegra20, must contain "nvidia,tegra20-pmc". For Tegra30, + must contain "nvidia,tegra30-pmc". For Tegra114, must contain + "nvidia,tegra114-pmc". For Tegra124, must contain "nvidia,tegra124-pmc". + Otherwise, must contain "nvidia,<chip>-pmc", plus at least one of the + above, where <chip> is tegra132. - reg : Offset and length of the register set for the device - clocks : Must contain an entry for each entry in clock-names. See ../clocks/clock-bindings.txt for details. diff --git a/Documentation/devicetree/bindings/ata/tegra-sata.txt b/Documentation/devicetree/bindings/ata/tegra-sata.txt index 946f2072570b..66c83c3e8915 100644 --- a/Documentation/devicetree/bindings/ata/tegra-sata.txt +++ b/Documentation/devicetree/bindings/ata/tegra-sata.txt @@ -1,7 +1,9 @@ Tegra124 SoC SATA AHCI controller Required properties : -- compatible : "nvidia,tegra124-ahci". +- compatible : For Tegra124, must contain "nvidia,tegra124-ahci". Otherwise, + must contain '"nvidia,<chip>-ahci", "nvidia,tegra124-ahci"', where <chip> + is tegra132. - reg : Should contain 2 entries: - AHCI register set (SATA BAR5) - SATA register set diff --git a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt index d8c98c7614d0..23e1d3194174 100644 --- a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt +++ b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt @@ -1,11 +1,11 @@ NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 fuse block. Required properties: -- compatible : should be: - "nvidia,tegra20-efuse" - "nvidia,tegra30-efuse" - "nvidia,tegra114-efuse" - "nvidia,tegra124-efuse" +- compatible : For Tegra20, must contain "nvidia,tegra20-efuse". For Tegra30, + must contain "nvidia,tegra30-efuse". For Tegra114, must contain + "nvidia,tegra114-efuse". For Tegra124, must contain "nvidia,tegra124-efuse". + Otherwise, must contain "nvidia,<chip>-efuse", plus one of the above, where + <chip> is tegra132. Details: nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data due to a hardware bug. Tegra20 also lacks certain information which is diff --git a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt index 4c32ef0b7db8..009f4bfa1590 100644 --- a/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt @@ -197,7 +197,9 @@ of the following host1x client modules: - sor: serial output resource Required properties: - - compatible: "nvidia,tegra124-sor" + - compatible: For Tegra124, must contain "nvidia,tegra124-sor". Otherwise, + must contain '"nvidia,<chip>-sor", "nvidia,tegra124-sor"', where <chip> + is tegra132. - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt outputs from the controller. - clocks: Must contain an entry for each entry in clock-names. @@ -222,7 +224,9 @@ of the following host1x client modules: - nvidia,dpaux: phandle to a DispayPort AUX interface - dpaux: DisplayPort AUX interface - - compatible: "nvidia,tegra124-dpaux" + - compatible: For Tegra124, must contain "nvidia,tegra124-dpaux". Otherwise, + must contain '"nvidia,<chip>-dpaux", "nvidia,tegra124-dpaux"', where + <chip> is tegra132. - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt outputs from the controller. - clocks: Must contain an entry for each entry in clock-names. diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt index 87507e9ce6db..656716b72cc4 100644 --- a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt @@ -1,11 +1,11 @@ NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver. Required properties: -- compatible : should be: - "nvidia,tegra114-i2c" - "nvidia,tegra30-i2c" - "nvidia,tegra20-i2c" - "nvidia,tegra20-i2c-dvc" +- compatible : For Tegra20, must be one of "nvidia,tegra20-i2c-dvc" or + "nvidia,tegra20-i2c". For Tegra30, must be "nvidia,tegra30-i2c". + For Tegra114, must be "nvidia,tegra114-i2c". Otherwise, must be + "nvidia,<chip>-i2c", plus at least one of the above, where <chip> is + tegra124, tegra132, or tegra210. Details of compatible are as follows: nvidia,tegra20-i2c-dvc: Tegra20 has specific I2C controller called as DVC I2C controller. This only support master mode of I2C communication. Register diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt index b97b8bef1fe5..47b205cc9cc7 100644 --- a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt +++ b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt @@ -1,11 +1,10 @@ NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 apbmisc block Required properties: -- compatible : should be: - "nvidia,tegra20-apbmisc" - "nvidia,tegra30-apbmisc" - "nvidia,tegra114-apbmisc" - "nvidia,tegra124-apbmisc" +- compatible : For Tegra20, must be "nvidia,tegra20-apbmisc". For Tegra30, + must be "nvidia,tegra30-apbmisc". Otherwise, must contain + "nvidia,<chip>-apbmisc", plus one of the above, where <chip> is tegra114, + tegra124, tegra132. - reg: Should contain 2 entries: the first entry gives the physical address and length of the registers which contain revision and debug features. The second entry gives the physical address and length of the diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt index f357c16ea815..15b8368ee1f2 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt @@ -7,7 +7,11 @@ This file documents differences between the core properties described by mmc.txt and the properties used by the sdhci-tegra driver. Required properties: -- compatible : Should be "nvidia,<chip>-sdhci" +- compatible : For Tegra20, must contain "nvidia,tegra20-sdhci". + For Tegra30, must contain "nvidia,tegra30-sdhci". For Tegra114, + must contain "nvidia,tegra114-sdhci". For Tegra124, must contain + "nvidia,tegra124-sdhci". Otherwise, must contain "nvidia,<chip>-sdhci", + plus one of the above, where <chip> is tegra132 or tegra210. - clocks : Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. - resets : Must contain an entry for each entry in reset-names. diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt index d763e047c6ae..75321ae23c08 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt @@ -1,10 +1,10 @@ NVIDIA Tegra PCIe controller Required properties: -- compatible: Must be one of: - - "nvidia,tegra20-pcie" - - "nvidia,tegra30-pcie" - - "nvidia,tegra124-pcie" +- compatible: For Tegra20, must contain "nvidia,tegra20-pcie". For Tegra30, + "nvidia,tegra30-pcie". For Tegra124, must contain "nvidia,tegra124-pcie". + Otherwise, must contain "nvidia,<chip>-pcie", plus one of the above, where + <chip> is tegra132 or tegra210. - device_type: Must be "pci" - reg: A list of physical base address and length for each set of controller registers. Must contain an entry for each entry in the reg-names property. diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt index 189814e7cdc7..ecb5c0d25218 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-pinmux.txt @@ -6,7 +6,8 @@ nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as a baseline, and only documents the differences between the two bindings. Required properties: -- compatible: "nvidia,tegra124-pinmux" +- compatible: For Tegra124, must contain "nvidia,tegra124-pinmux". For + Tegra132, must contain '"nvidia,tegra132-pinmux", "nvidia-tegra124-pinmux"'. - reg: Should contain a list of base address and size pairs for: -- first entry - the drive strength and pad control registers. -- second entry - the pinmux registers diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt index 2f9c0bd66457..30676ded85bb 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt @@ -13,7 +13,9 @@ how to describe and reference PHYs in device trees. Required properties: -------------------- -- compatible: should be "nvidia,tegra124-xusb-padctl" +- compatible: For Tegra124, must contain "nvidia,tegra124-xusb-padctl". + Otherwise, must contain '"nvidia,<chip>-xusb-padctl", + "nvidia-tegra124-xusb-padctl"', where <chip> is tegra132 or tegra210. - reg: Physical base address and length of the controller's registers. - resets: Must contain an entry for each entry in reset-names. See ../reset/reset.txt for details. diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt index c7ea9d4a988b..c52f03b5032f 100644 --- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt @@ -1,9 +1,10 @@ Tegra SoC PWFM controller Required properties: -- compatible: should be one of: - - "nvidia,tegra20-pwm" - - "nvidia,tegra30-pwm" +- compatible: For Tegra20, must contain "nvidia,tegra20-pwm". For Tegra30, + must contain "nvidia,tegra30-pwm". Otherwise, must contain + "nvidia,<chip>-pwm", plus one of the above, where <chip> is tegra114, + tegra124, tegra132, or tegra210. - reg: physical base address and length of the controller's registers - #pwm-cells: should be 2. See pwm.txt in this directory for a description of the cells format. diff --git a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt index 652d1ff2e8be..b7d98ed3e098 100644 --- a/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/nvidia,tegra20-rtc.txt @@ -6,7 +6,9 @@ state. Required properties: -- compatible : should be "nvidia,tegra20-rtc". +- compatible : For Tegra20, must contain "nvidia,tegra20-rtc". Otherwise, + must contain '"nvidia,<chip>-rtc", "nvidia,tegra20-rtc"', where <chip> + can be tegra30, tegra114, tegra124, or tegra132. - reg : Specifies base physical address and size of the registers. - interrupts : A single interrupt specifier. - clocks : Must contain one entry, for the module clock. diff --git a/Documentation/devicetree/bindings/serial/of-serial.txt b/Documentation/devicetree/bindings/serial/of-serial.txt index b52b98234b9b..bea60ef6cdc5 100644 --- a/Documentation/devicetree/bindings/serial/of-serial.txt +++ b/Documentation/devicetree/bindings/serial/of-serial.txt @@ -8,7 +8,10 @@ Required properties: - "ns16550" - "ns16750" - "ns16850" - - "nvidia,tegra20-uart" + - For Tegra20, must contain "nvidia,tegra20-uart" + - For other Tegra, must contain '"nvidia,<chip>-uart", + "nvidia,tegra20-uart"' where <chip> is tegra30, tegra114, tegra124, + tegra132, or tegra210. - "nxp,lpc3220-uart" - "ralink,rt2880-uart" - "ibm,qpace-nwp-serial" diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt index 946e2ac46091..0e9a1895d7fb 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-ahub.txt @@ -1,7 +1,10 @@ NVIDIA Tegra30 AHUB (Audio Hub) Required properties: -- compatible : "nvidia,tegra30-ahub", "nvidia,tegra114-ahub", etc. +- compatible : For Tegra30, must contain "nvidia,tegra30-ahub". For Tegra114, + must contain "nvidia,tegra114-ahub". For Tegra124, must contain + "nvidia,tegra124-ahub". Otherwise, must contain "nvidia,<chip>-ahub", + plus at least one of the above, where <chip> is tegra132. - reg : Should contain the register physical address and length for each of the AHUB's register blocks. - Tegra30 requires 2 entries, for the APBIF and AHUB/AUDIO register blocks. diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt index b4730c2822bc..13e2ef496724 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-hda.txt @@ -1,7 +1,9 @@ NVIDIA Tegra30 HDA controller Required properties: -- compatible : "nvidia,tegra30-hda" +- compatible : For Tegra30, must contain "nvidia,tegra30-hda". Otherwise, + must contain '"nvidia,<chip>-hda", "nvidia,tegra30-hda"', where <chip> is + tegra114, tegra124, or tegra132. - reg : Should contain the HDA registers location and length. - interrupts : The interrupt from the HDA controller. - clocks : Must contain an entry for each required entry in clock-names. diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt index 0c113ffe3814..38caa936f6f8 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra30-i2s.txt @@ -1,7 +1,10 @@ NVIDIA Tegra30 I2S controller Required properties: -- compatible : "nvidia,tegra30-i2s" +- compatible : For Tegra30, must contain "nvidia,tegra30-i2s". For Tegra124, + must contain "nvidia,tegra124-i2s". Otherwise, must contain + "nvidia,<chip>-i2s" plus at least one of the above, where <chip> is + tegra114 or tegra132. - reg : Should contain I2S registers location and length - clocks : Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt index 7ea701e07dc2..b785976fe98a 100644 --- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt @@ -1,7 +1,9 @@ NVIDIA Tegra114 SPI controller. Required properties: -- compatible : should be "nvidia,tegra114-spi". +- compatible : For Tegra114, must contain "nvidia,tegra114-spi". + Otherwise, must contain '"nvidia,<chip>-spi", "nvidia,tegra114-spi"' where + <chip> is tegra124, tegra132, or tegra210. - reg: Should contain SPI registers location and length. - interrupts: Should contain SPI interrupts. - clock-names : Must include the following entries: diff --git a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt index ecf3ed76cd46..6b68cd150405 100644 --- a/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt +++ b/Documentation/devicetree/bindings/thermal/tegra-soctherm.txt @@ -7,7 +7,9 @@ notifications. It is also used to manage emergency shutdown in an overheating situation. Required properties : -- compatible : "nvidia,tegra124-soctherm". +- compatible : For Tegra124, must contain "nvidia,tegra124-soctherm". + For Tegra132, must contain "nvidia,tegra132-soctherm". + For Tegra210, must contain "nvidia,tegra210-soctherm". - reg : Should contain 1 entry: - SOCTHERM register set - interrupts : Defines the interrupt used by SOCTHERM diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt b/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt index b5082a1cf461..1761f53ee36f 100644 --- a/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt +++ b/Documentation/devicetree/bindings/timer/nvidia,tegra30-timer.txt @@ -6,7 +6,9 @@ trigger a legacy watchdog reset. Required properties: -- compatible : should be "nvidia,tegra30-timer", "nvidia,tegra20-timer". +- compatible : For Tegra30, must contain "nvidia,tegra30-timer". Otherwise, + must contain '"nvidia,<chip>-timer", "nvidia,tegra30-timer"' where + <chip> is tegra124 or tegra132. - reg : Specifies base physical address and size of the registers. - interrupts : A list of 6 interrupts; one per each of timer channels 1 through 5, and one for the shared interrupt for the remaining channels. diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt index 3dc9140e3dfb..f60785f73d3d 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt @@ -6,7 +6,10 @@ Practice : Universal Serial Bus" with the following modifications and additions : Required properties : - - compatible : Should be "nvidia,tegra20-ehci". + - compatible : For Tegra20, must contain "nvidia,tegra20-ehci". + For Tegra30, must contain "nvidia,tegra30-ehci". Otherwise, must contain + "nvidia,<chip>-ehci" plus at least one of the above, where <chip> is + tegra114, tegra124, tegra132, or tegra210. - nvidia,phy : phandle of the PHY that the controller is connected to. - clocks : Must contain one entry, for the module clock. See ../clocks/clock-bindings.txt for details. diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt index c9205fbf26e2..a9aa79fb90ed 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt @@ -3,7 +3,10 @@ Tegra SOC USB PHY The device node for Tegra SOC USB PHY: Required properties : - - compatible : Should be "nvidia,tegra<chip>-usb-phy". + - compatible : For Tegra20, must contain "nvidia,tegra20-usb-phy". + For Tegra30, must contain "nvidia,tegra30-usb-phy". Otherwise, must contain + "nvidia,<chip>-usb-phy" plus at least one of the above, where <chip> is + tegra114, tegra124, tegra132, or tegra210. - reg : Defines the following set of registers, in the order listed: - The PHY's own register set. Always present. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
