On Fri, Jan 30, 2015 at 06:28:59AM -0500, Yakir Yang wrote:
> Signed-off-by: Yakir Yang <ykk@xxxxxxxxxxxxxx>
> ---
> Changes in v2:
> - Add suspend/resume support for dw_hdmi_rockchip driver
>
> drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> index d236faa..2f8bacb 100644
> --- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> +++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
> @@ -323,9 +323,22 @@ static int dw_hdmi_rockchip_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static int dw_hdmi_rockchip_suspend(struct platform_device *pdev,
> + pm_message_t state)
> +{
> + return dw_hdmi_suspend(pdev, state);
> +}
> +
> +static int dw_hdmi_rockchip_resume(struct platform_device *pdev)
> +{
> + return dw_hdmi_resume(pdev);
> +}
> +
> static struct platform_driver dw_hdmi_rockchip_pltfm_driver = {
> .probe = dw_hdmi_rockchip_probe,
> .remove = dw_hdmi_rockchip_remove,
> + .resume = dw_hdmi_rockchip_resume,
> + .suspend = dw_hdmi_rockchip_suspend,
> .driver = {
> .name = "dwhdmi-rockchip",
> .of_match_table = dw_hdmi_rockchip_dt_ids,
Using the power management operations (setting the .pm member in
the embedded struct device_driver) is preferred over using the
.resume and .suspend methods.
Please update this patch to use the preferred method. Thanks.
--
FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up
according to speedtest.net.
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
