Hi Kukjin,
On Fri, Jan 23, 2015 at 12:31 PM, Kukjin Kim <kgene@xxxxxxxxxx> wrote:
> Ajay Kumar wrote:
>>
>> Define videoports and use endpoints to describe the connection between
>> the encoder, bridge and the panel, instead of using phandles.
>>
>> Signed-off-by: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
>> Acked-by: Inki Dae <inki.dae@xxxxxxxxxxx>
>> Tested-by: Rahul Sharma <rahul.sharma@xxxxxxxxxxx>
>> Tested-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
>> Tested-by: Gustavo Padovan <gustavo.padovan@xxxxxxxxxxxxxxx>
>> Tested-by: Sjoerd Simons <sjoerd.simons@xxxxxxxxxxxxxxx>
>> ---
>> arch/arm/boot/dts/exynos5250-snow.dts | 30 ++++++++++++++++++++++++++++--
>> 1 file changed, 28 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
>> index b9aeec4..1bd5d3a 100644
>> --- a/arch/arm/boot/dts/exynos5250-snow.dts
>> +++ b/arch/arm/boot/dts/exynos5250-snow.dts
>> @@ -183,7 +183,20 @@
>> powerdown-gpios = <&gpy2 5 GPIO_ACTIVE_HIGH>;
>> reset-gpios = <&gpx1 5 GPIO_ACTIVE_HIGH>;
>> edid-emulation = <5>;
>> - panel = <&panel>;
>> +
>> + ports {
>> + port@0 {
>> + bridge_out: endpoint {
>> + remote-endpoint = <&panel_in>;
>> + };
>> + };
>> +
>> + port@1 {
>> + bridge_in: endpoint {
>> + remote-endpoint = <&dp_out>;
>> + };
>> + };
>> + };
>> };
>> };
>>
>> @@ -228,6 +241,12 @@
>> compatible = "auo,b116xw03";
>> power-supply = <&fet6>;
>> backlight = <&backlight>;
>> +
>> + port {
>> + panel_in: endpoint {
>> + remote-endpoint = <&bridge_out>;
>> + };
>> + };
>> };
>> };
>>
>> @@ -242,7 +261,14 @@
>> samsung,link-rate = <0x0a>;
>> samsung,lane-count = <2>;
>> samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
>> - bridge = <&ptn3460>;
>> +
>> + ports {
>> + port@0 {
>> + dp_out: endpoint {
>> + remote-endpoint = <&bridge_in>;
>> + };
>> + };
>> + };
>> };
>>
>> &ehci {
>> --
>> 1.7.9.5
>
> I'm fine on the DT changes in this series, shall I take 13/14 and 14/14 in
> Samsung tree?
Yes, please take these patches.
Thanks and regards,
Ajay Kumar
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
