Commit eb10d6355532 ("imx-drm: encoder prepare/mode_set must use adjusted mode")
broke the first LVDS modeset by using crtc->hwmode before crtc mode_set is
called. In fact, encoder prepare is not supposed to prepare the display clock
at all. Rather encoder mode_set should be used to set the DI clock rate, before
it is enabled by crtc commit.
Reported-by: Liu Ying <Ying.Liu@xxxxxxxxxxxxx>
Tested-by: Fabio Estevam <fabio.estevam@xxxxxxxxxxxxx>
Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/imx/imx-ldb.c | 28 +++++++++++++---------------
1 file changed, 13 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/imx/imx-ldb.c b/drivers/gpu/drm/imx/imx-ldb.c
index 1b86aac..2d6dc94 100644
--- a/drivers/gpu/drm/imx/imx-ldb.c
+++ b/drivers/gpu/drm/imx/imx-ldb.c
@@ -163,22 +163,7 @@ static void imx_ldb_encoder_prepare(struct drm_encoder *encoder)
{
struct imx_ldb_channel *imx_ldb_ch = enc_to_imx_ldb_ch(encoder);
struct imx_ldb *ldb = imx_ldb_ch->ldb;
- struct drm_display_mode *mode = &encoder->crtc->hwmode;
u32 pixel_fmt;
- unsigned long serial_clk;
- unsigned long di_clk = mode->clock * 1000;
- int mux = imx_drm_encoder_get_mux_id(imx_ldb_ch->child, encoder);
-
- if (ldb->ldb_ctrl & LDB_SPLIT_MODE_EN) {
- /* dual channel LVDS mode */
- serial_clk = 3500UL * mode->clock;
- imx_ldb_set_clock(ldb, mux, 0, serial_clk, di_clk);
- imx_ldb_set_clock(ldb, mux, 1, serial_clk, di_clk);
- } else {
- serial_clk = 7000UL * mode->clock;
- imx_ldb_set_clock(ldb, mux, imx_ldb_ch->chno, serial_clk,
- di_clk);
- }
switch (imx_ldb_ch->chno) {
case 0:
@@ -247,6 +232,9 @@ static void imx_ldb_encoder_mode_set(struct drm_encoder *encoder,
struct imx_ldb_channel *imx_ldb_ch = enc_to_imx_ldb_ch(encoder);
struct imx_ldb *ldb = imx_ldb_ch->ldb;
int dual = ldb->ldb_ctrl & LDB_SPLIT_MODE_EN;
+ unsigned long serial_clk;
+ unsigned long di_clk = mode->clock * 1000;
+ int mux = imx_drm_encoder_get_mux_id(imx_ldb_ch->child, encoder);
if (mode->clock > 170000) {
dev_warn(ldb->dev,
@@ -257,6 +245,16 @@ static void imx_ldb_encoder_mode_set(struct drm_encoder *encoder,
"%s: mode exceeds 85 MHz pixel clock\n", __func__);
}
+ if (dual) {
+ serial_clk = 3500UL * mode->clock;
+ imx_ldb_set_clock(ldb, mux, 0, serial_clk, di_clk);
+ imx_ldb_set_clock(ldb, mux, 1, serial_clk, di_clk);
+ } else {
+ serial_clk = 7000UL * mode->clock;
+ imx_ldb_set_clock(ldb, mux, imx_ldb_ch->chno, serial_clk,
+ di_clk);
+ }
+
/* FIXME - assumes straight connections DI0 --> CH0, DI1 --> CH1 */
if (imx_ldb_ch == &ldb->channel[0]) {
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
--
2.1.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
