Mark,
在 2015年01月22日 11:15, Mark Yao 写道:
Vop set wrong vsync/hsync polarity, it may cause some
display problem. known problem is that caused HDMI hdcp
authenticate failed, caused pixel offset with hdmi display.
the polarity description at RK3288 TRM doc:
dsp_vsync_pol
VSYNC polarity
1'b0 : negative
1'b1 : positive
dsp_hsync_pol
HSYNC polarity
1'b0 : negative
1'b1 : positive
Signed-off-by: Mark Yao <mark.yao@xxxxxxxxxxxxxx>
---
drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
index 9a5c571..2b145ba5 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c
@@ -874,8 +874,8 @@ static int vop_crtc_mode_set(struct drm_crtc *crtc,
VOP_CTRL_SET(vop, out_mode, vop->connector_out_mode);
val = 0x8;
- val |= (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) ? 1 : 0;
- val |= (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) ? (1 << 1) : 0;
+ val |= (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) ? 0 : 1;
+ val |= (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) ? 0 : (1 << 1);
Tested-by: Caesar Wang <wxt@xxxxxxxxxxxxxx>
VOP_CTRL_SET(vop, pin_pol, val);
VOP_CTRL_SET(vop, htotal_pw, (htotal << 16) | hsync_len);
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel