[PATCH v3 3/3] ARM: dts: add Panel device support for exynos3250-rinato

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Inki Dae <inki.dae@xxxxxxxxxxx>

This patch adds MIPI-DSI and MIPI-DSI based S6E63J0X03 AMOLED panel
device nodes for Exynos3250 Rinato board.

Signed-off-by: Inki Dae <inki.dae@xxxxxxxxxxx>
Signed-off-by: Hyungwon Hwang <human.hwang@xxxxxxxxxxx>
Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
Changes for v2:
- None
Changes for v3:
- Remove unnecessary DT properties of flip-*
 arch/arm/boot/dts/exynos3250-rinato.dts | 116 ++++++++++++++++++++++++++++++++
 1 file changed, 116 insertions(+)

diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 8b033b5..659068f 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -125,6 +125,122 @@
 	};
 };

+&dsi_0 {
+	vddcore-supply = <&ldo6_reg>;
+	vddio-supply = <&ldo6_reg>;
+	samsung,pll-clock-frequency = <24000000>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&dsi_in>;
+				samsung,burst-clock-frequency = <250000000>;
+				samsung,esc-clock-frequency = <20000000>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "samsung,s6e63j0x03";
+		reg = <0>;
+		vdd3-supply = <&ldo16_reg>;
+		vci-supply = <&ldo20_reg>;
+		reset-gpios = <&gpe0 1 0>;
+		te-gpios = <&gpx0 6 0>;
+		power-on-delay= <30>;
+		power-off-delay= <120>;
+		reset-delay = <5>;
+		init-delay = <100>;
+		panel-width-mm = <29>;
+		panel-height-mm = <29>;
+
+
+		display-timings {
+			timing-0 {
+				clock-frequency = <0>;
+				hactive = <320>;
+				vactive = <320>;
+				hfront-porch = <1>;
+				hback-porch = <1>;
+				hsync-len = <1>;
+				vfront-porch = <150>;
+				vback-porch = <1>;
+				vsync-len = <2>;
+			};
+		};
+
+		port {
+			dsi_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_0 {
+	vddcore-supply = <&ldo6_reg>;
+	vddio-supply = <&ldo6_reg>;
+	samsung,pll-clock-frequency = <24000000>;
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			dsi_out: endpoint {
+				remote-endpoint = <&dsi_in>;
+				samsung,burst-clock-frequency = <250000000>;
+				samsung,esc-clock-frequency = <20000000>;
+			};
+		};
+	};
+
+	panel@0 {
+		compatible = "samsung,s6e63j0x03";
+		reg = <0>;
+		vdd3-supply = <&ldo16_reg>;
+		vci-supply = <&ldo20_reg>;
+		reset-gpios = <&gpe0 1 0>;
+		te-gpios = <&gpx0 6 0>;
+		power-on-delay= <30>;
+		power-off-delay= <120>;
+		reset-delay = <5>;
+		init-delay = <100>;
+		panel-width-mm = <29>;
+		panel-height-mm = <29>;
+
+
+		display-timings {
+			timing-0 {
+				clock-frequency = <0>;
+				hactive = <320>;
+				vactive = <320>;
+				hfront-porch = <1>;
+				hback-porch = <1>;
+				hsync-len = <1>;
+				vfront-porch = <150>;
+				vback-porch = <1>;
+				vsync-len = <2>;
+			};
+		};
+
+		port {
+			dsi_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
 &fimd {
 	status = "okay";

--
1.9.1

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux