On Tue, Jan 13, 2015 at 05:18:04PM -0500, Stephane Viau wrote:
> From: Beeresh Gopal <gbeeresh@xxxxxxxxxxxxxx>
>
> This patch implements the hardware accelarated cursor
> support for MDP5 platforms.
>
> Signed-off-by: Beeresh Gopal <gbeeresh@xxxxxxxxxxxxxx>
> Signed-off-by: Wentao Xu <wentaox@xxxxxxxxxxxxxx>
> Signed-off-by: Stephane Viau <sviau@xxxxxxxxxxxxxx>
Imo implementing legacy cursor support instead of with universal planes
makes no sense. Especially since msm is converted to atomic already, and
you can't move the cursor with atomic when it's legacy only. See the
cursor argument for the drm_crtc_init_with_planes function and how it's
used in e.g. i915.
Cheers, Daniel
> ---
> drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c | 164 +++++++++++++++++++++++++++++++
> 1 file changed, 164 insertions(+)
>
> diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c
> index f021f96..2021f09 100644
> --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c
> +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c
> @@ -24,6 +24,9 @@
> #include "drm_crtc_helper.h"
> #include "drm_flip_work.h"
>
> +#define CURSOR_WIDTH 64
> +#define CURSOR_HEIGHT 64
> +
> #define SSPP_MAX (SSPP_RGB3 + 1) /* TODO: Add SSPP_MAX in mdp5.xml.h */
>
> struct mdp5_crtc {
> @@ -47,8 +50,21 @@ struct mdp5_crtc {
> #define PENDING_FLIP 0x2
> atomic_t pending;
>
> + /* for unref'ing cursor bo's after scanout completes: */
> + struct drm_flip_work unref_cursor_work;
> +
> struct mdp_irq vblank;
> struct mdp_irq err;
> +
> + struct {
> + /* protect REG_MDP5_LM_CURSOR* registers and cursor scanout_bo*/
> + spinlock_t lock;
> +
> + /* current cursor being scanned out: */
> + struct drm_gem_object *scanout_bo;
> + uint32_t width;
> + uint32_t height;
> + } cursor;
> };
> #define to_mdp5_crtc(x) container_of(x, struct mdp5_crtc, base)
>
> @@ -129,11 +145,22 @@ static void complete_flip(struct drm_crtc *crtc, struct drm_file *file)
> }
> }
>
> +static void unref_cursor_worker(struct drm_flip_work *work, void *val)
> +{
> + struct mdp5_crtc *mdp5_crtc =
> + container_of(work, struct mdp5_crtc, unref_cursor_work);
> + struct mdp5_kms *mdp5_kms = get_kms(&mdp5_crtc->base);
> +
> + msm_gem_put_iova(val, mdp5_kms->id);
> + drm_gem_object_unreference_unlocked(val);
> +}
> +
> static void mdp5_crtc_destroy(struct drm_crtc *crtc)
> {
> struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc);
>
> drm_crtc_cleanup(crtc);
> + drm_flip_work_cleanup(&mdp5_crtc->unref_cursor_work);
>
> kfree(mdp5_crtc);
> }
> @@ -384,6 +411,132 @@ static int mdp5_crtc_set_property(struct drm_crtc *crtc,
> return -EINVAL;
> }
>
> +static int mdp5_crtc_cursor_set(struct drm_crtc *crtc,
> + struct drm_file *file, uint32_t handle,
> + uint32_t width, uint32_t height)
> +{
> + struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc);
> + struct drm_device *dev = crtc->dev;
> + struct mdp5_kms *mdp5_kms = get_kms(crtc);
> + struct drm_gem_object *cursor_bo, *old_bo;
> + uint32_t blendcfg, cursor_addr, stride;
> + int ret, bpp, lm;
> + unsigned int depth;
> + enum mdp5_cursor_alpha cur_alpha = CURSOR_ALPHA_PER_PIXEL;
> + uint32_t flush_mask = mdp_ctl_flush_mask_cursor(0);
> + unsigned long flags;
> +
> + if ((width > CURSOR_WIDTH) || (height > CURSOR_HEIGHT)) {
> + dev_err(dev->dev, "bad cursor size: %dx%d\n", width, height);
> + return -EINVAL;
> + }
> +
> + if (NULL == mdp5_crtc->ctl)
> + return -EINVAL;
> +
> + if (!handle) {
> + DBG("Cursor off");
> + return mdp5_ctl_set_cursor(mdp5_crtc->ctl, false);
> + }
> +
> + cursor_bo = drm_gem_object_lookup(dev, file, handle);
> + if (!cursor_bo)
> + return -ENOENT;
> +
> + ret = msm_gem_get_iova(cursor_bo, mdp5_kms->id, &cursor_addr);
> + if (ret)
> + return -EINVAL;
> +
> + lm = mdp5_crtc->lm;
> + drm_fb_get_bpp_depth(DRM_FORMAT_ARGB8888, &depth, &bpp);
> + stride = width * (bpp >> 3);
> +
> + spin_lock_irqsave(&mdp5_crtc->cursor.lock, flags);
> + old_bo = mdp5_crtc->cursor.scanout_bo;
> +
> + mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_STRIDE(lm), stride);
> + mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_FORMAT(lm),
> + MDP5_LM_CURSOR_FORMAT_FORMAT(CURSOR_FMT_ARGB8888));
> + mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_IMG_SIZE(lm),
> + MDP5_LM_CURSOR_IMG_SIZE_SRC_H(height) |
> + MDP5_LM_CURSOR_IMG_SIZE_SRC_W(width));
> + mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_SIZE(lm),
> + MDP5_LM_CURSOR_SIZE_ROI_H(height) |
> + MDP5_LM_CURSOR_SIZE_ROI_W(width));
> + mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_BASE_ADDR(lm), cursor_addr);
> +
> +
> + blendcfg = MDP5_LM_CURSOR_BLEND_CONFIG_BLEND_EN;
> + blendcfg |= MDP5_LM_CURSOR_BLEND_CONFIG_BLEND_TRANSP_EN;
> + blendcfg |= MDP5_LM_CURSOR_BLEND_CONFIG_BLEND_ALPHA_SEL(cur_alpha);
> + mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_BLEND_CONFIG(lm), blendcfg);
> +
> + mdp5_crtc->cursor.scanout_bo = cursor_bo;
> + mdp5_crtc->cursor.width = width;
> + mdp5_crtc->cursor.height = height;
> + spin_unlock_irqrestore(&mdp5_crtc->cursor.lock, flags);
> +
> + ret = mdp5_ctl_set_cursor(mdp5_crtc->ctl, true);
> + if (ret)
> + goto end;
> +
> + flush_mask |= mdp5_ctl_get_flush(mdp5_crtc->ctl);
> + crtc_flush(crtc, flush_mask);
> +
> +end:
> + if (old_bo) {
> + drm_flip_work_queue(&mdp5_crtc->unref_cursor_work, old_bo);
> + /* enable vblank to complete cursor work: */
> + request_pending(crtc, PENDING_CURSOR);
> + }
> + return ret;
> +}
> +
> +static int mdp5_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
> +{
> + struct mdp5_kms *mdp5_kms = get_kms(crtc);
> + struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc);
> + uint32_t flush_mask = mdp_ctl_flush_mask_cursor(0);
> + uint32_t xres = crtc->mode.hdisplay;
> + uint32_t yres = crtc->mode.vdisplay;
> + uint32_t roi_w;
> + uint32_t roi_h;
> + unsigned long flags;
> +
> + x = (x > 0) ? x : 0;
> + y = (y > 0) ? y : 0;
> +
> + /*
> + * Cursor Region Of Interest (ROI) is a plane read from cursor
> + * buffer to render. The ROI region is determined by the visiblity of
> + * the cursor point. In the default Cursor image the cursor point will
> + * be at the top left of the cursor image, unless it is specified
> + * otherwise using hotspot feature.
> + *
> + * If the cursor point reaches the right (xres - x < cursor.width) or
> + * bottom (yres - y < cursor.height) boundary of the screen, then ROI
> + * width and ROI height need to be evaluated to crop the cursor image
> + * accordingly.
> + * (xres-x) will be new cursor width when x > (xres - cursor.width)
> + * (yres-y) will be new cursor height when y > (yres - cursor.height)
> + */
> + roi_w = min(mdp5_crtc->cursor.width, xres - x);
> + roi_h = min(mdp5_crtc->cursor.height, yres - y);
> +
> + spin_lock_irqsave(&mdp5_crtc->cursor.lock, flags);
> + mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_SIZE(mdp5_crtc->lm),
> + MDP5_LM_CURSOR_SIZE_ROI_H(roi_h) |
> + MDP5_LM_CURSOR_SIZE_ROI_W(roi_w));
> + mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_START_XY(mdp5_crtc->lm),
> + MDP5_LM_CURSOR_START_XY_Y_START(y) |
> + MDP5_LM_CURSOR_START_XY_X_START(x));
> + spin_unlock_irqrestore(&mdp5_crtc->cursor.lock, flags);
> +
> + crtc_flush(crtc, flush_mask);
> +
> + return 0;
> +}
> +
> static const struct drm_crtc_funcs mdp5_crtc_funcs = {
> .set_config = drm_atomic_helper_set_config,
> .destroy = mdp5_crtc_destroy,
> @@ -392,6 +545,8 @@ static const struct drm_crtc_funcs mdp5_crtc_funcs = {
> .reset = drm_atomic_helper_crtc_reset,
> .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
> .atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
> + .cursor_set = mdp5_crtc_cursor_set,
> + .cursor_move = mdp5_crtc_cursor_move,
> };
>
> static const struct drm_crtc_helper_funcs mdp5_crtc_helper_funcs = {
> @@ -412,6 +567,7 @@ static void mdp5_crtc_vblank_irq(struct mdp_irq *irq, uint32_t irqstatus)
> {
> struct mdp5_crtc *mdp5_crtc = container_of(irq, struct mdp5_crtc, vblank);
> struct drm_crtc *crtc = &mdp5_crtc->base;
> + struct msm_drm_private *priv = crtc->dev->dev_private;
> unsigned pending;
>
> mdp_irq_unregister(&get_kms(crtc)->base, &mdp5_crtc->vblank);
> @@ -421,6 +577,9 @@ static void mdp5_crtc_vblank_irq(struct mdp_irq *irq, uint32_t irqstatus)
> if (pending & PENDING_FLIP) {
> complete_flip(crtc, NULL);
> }
> +
> + if (pending & PENDING_CURSOR)
> + drm_flip_work_commit(&mdp5_crtc->unref_cursor_work, priv->wq);
> }
>
> static void mdp5_crtc_err_irq(struct mdp_irq *irq, uint32_t irqstatus)
> @@ -520,6 +679,7 @@ struct drm_crtc *mdp5_crtc_init(struct drm_device *dev,
> mdp5_crtc->lm = GET_LM_ID(id);
>
> spin_lock_init(&mdp5_crtc->lm_lock);
> + spin_lock_init(&mdp5_crtc->cursor.lock);
>
> mdp5_crtc->vblank.irq = mdp5_crtc_vblank_irq;
> mdp5_crtc->err.irq = mdp5_crtc_err_irq;
> @@ -528,6 +688,10 @@ struct drm_crtc *mdp5_crtc_init(struct drm_device *dev,
> pipe2name(mdp5_plane_pipe(plane)), id);
>
> drm_crtc_init_with_planes(dev, crtc, plane, NULL, &mdp5_crtc_funcs);
> +
> + drm_flip_work_init(&mdp5_crtc->unref_cursor_work,
> + "unref cursor", unref_cursor_worker);
> +
> drm_crtc_helper_add(crtc, &mdp5_crtc_helper_funcs);
> plane->crtc = crtc;
>
> --
> Qualcomm Innovation Center, Inc.
>
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
