Add node for NXP TDA19988 encoder and refer to it in the hdmi node instead of referring to the i2c bus where the encoder is connected to. Signed-off-by: Jyri Sarha <jsarha@xxxxxx> --- arch/arm/boot/dts/am335x-boneblack.dts | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 5c42d25..c0c8e4b 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -70,10 +70,17 @@ status = "okay"; }; +&i2c0 { + tda19988: tda19988@70 { + compatible = "nxp,tda998x"; + reg = <0x70>; + }; +}; + / { hdmi { compatible = "ti,tilcdc,slave"; - i2c = <&i2c0>; + i2c-slave = <&tda19988>; pinctrl-names = "default", "off"; pinctrl-0 = <&nxp_hdmi_bonelt_pins>; pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; -- 1.7.9.5 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel