Re: [Intel-gfx] [PATCH 1/2] drm: Adding rotation to drm_plane_helper_check_update

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 13, 2015 at 06:03:39PM +0530, Sonika Jindal wrote:
> Taking rotation into account while checking the plane
> and adjusting the sizes accordingly.
> 
> Signed-off-by: Sonika Jindal <sonika.jindal@xxxxxxxxx>
> ---
>  drivers/gpu/drm/drm_plane_helper.c |   79 ++++++++++++++++++++++++++++++++++--
>  include/drm/drm_plane_helper.h     |    3 +-
>  2 files changed, 77 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_plane_helper.c b/drivers/gpu/drm/drm_plane_helper.c
> index f24c4cf..4badd69 100644
> --- a/drivers/gpu/drm/drm_plane_helper.c
> +++ b/drivers/gpu/drm/drm_plane_helper.c
> @@ -138,9 +138,13 @@ int drm_plane_helper_check_update(struct drm_plane *plane,
>  				    int max_scale,
>  				    bool can_position,
>  				    bool can_update_disabled,
> -				    bool *visible)
> +				    bool *visible,
> +				    unsigned int rotation)
>  {
>  	int hscale, vscale;
> +	int crtc_x, crtc_y;
> +	unsigned int crtc_w, crtc_h;
> +	uint32_t src_x, src_y, src_w, src_h;
>  
>  	if (!fb) {
>  		*visible = false;
> @@ -158,9 +162,13 @@ int drm_plane_helper_check_update(struct drm_plane *plane,
>  		return -EINVAL;
>  	}
>  
> +	if (fb)
> +		drm_rect_rotate(src, fb->width << 16, fb->height << 16,
> +				rotation);
> +
>  	/* Check scaling */
> -	hscale = drm_rect_calc_hscale(src, dest, min_scale, max_scale);
> -	vscale = drm_rect_calc_vscale(src, dest, min_scale, max_scale);
> +	hscale = drm_rect_calc_hscale_relaxed(src, dest, min_scale, max_scale);
> +	vscale = drm_rect_calc_vscale_relaxed(src, dest, min_scale, max_scale);

This is an unrelated change. Relaxed scaling allows the the src/dest
rectangles to be reduced in size in order to keep the scaling ration
within the min/max range. I suppose we should switch to using it to
make the behaviour uniform across drivers, but definitely should be
done with a separate patch.

>  	if (hscale < 0 || vscale < 0) {
>  		DRM_DEBUG_KMS("Invalid scaling of plane\n");
>  		return -ERANGE;
> @@ -182,6 +190,68 @@ int drm_plane_helper_check_update(struct drm_plane *plane,
>  		return -EINVAL;
>  	}
>  
> +	crtc_x = dest->x1;
> +	crtc_y = dest->y1;
> +	crtc_w = drm_rect_width(dest);
> +	crtc_h = drm_rect_height(dest);

You don't adjust these in any way so they are not needed.

> +
> +	if (*visible) {
> +		/* check again in case clipping clamped the results */
> +		hscale = drm_rect_calc_hscale(src, dest,
> +						DRM_PLANE_HELPER_NO_SCALING,
> +						DRM_PLANE_HELPER_NO_SCALING);

First you allowed scaling and now you don't. What's up with that?

> +		if (hscale < 0) {
> +			DRM_DEBUG_KMS("Horizontal scaling factor out of limits\n");
> +			drm_rect_debug_print(src, true);
> +			drm_rect_debug_print(dest, false);
> +
> +			return hscale;
> +		}
> +
> +		vscale = drm_rect_calc_vscale(src, dest,
> +						DRM_PLANE_HELPER_NO_SCALING,
> +						DRM_PLANE_HELPER_NO_SCALING);
> +		if (vscale < 0) {
> +			DRM_DEBUG_KMS("Vertical scaling factor out of limits\n");
> +			drm_rect_debug_print(src, true);
> +			drm_rect_debug_print(dest, false);
> +
> +			return vscale;
> +		}
> +
> +		/* Make the source viewport size an exact multiple of the scaling factors. */
> +		drm_rect_adjust_size(src,
> +			drm_rect_width(dest) * hscale - drm_rect_width(src),
> +			drm_rect_height(dest) * vscale - drm_rect_height(src));
> +
> +		drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16,
> +				    rotation);
> +
> +		/*
> +		 * Hardware doesn't handle subpixel coordinates.

That's a purely hardware specific detail. It should not be part of the
helpers. And in any case the returned src coordinates must remain in
fixed point format.

> +		 * Adjust to (macro)pixel boundary, but be careful not to
> +		 * increase the source viewport size, because that could
> +		 * push the downscaling factor out of bounds.
> +		 */
> +		src_x = src->x1 >> 16;
> +		src_w = drm_rect_width(src) >> 16;
> +		src_y = src->y1 >> 16;
> +		src_h = drm_rect_height(src) >> 16;
> +	}
> +
> +	if (*visible) {
> +		src->x1 = src_x;
> +		src->x2 = src_x + src_w;
> +		src->y1 = src_y;
> +		src->y2 = src_y + src_h;
> +	}
> +
> +	dest->x1 = crtc_x;
> +	dest->x2 = crtc_x + crtc_w;
> +	dest->y1 = crtc_y;
> +	dest->y2 = crtc_y + crtc_h;
> +
> +
>  	return 0;
>  }
>  EXPORT_SYMBOL(drm_plane_helper_check_update);
> @@ -258,7 +328,8 @@ int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
>  					    &src, &dest, &clip,
>  					    DRM_PLANE_HELPER_NO_SCALING,
>  					    DRM_PLANE_HELPER_NO_SCALING,
> -					    false, false, &visible);
> +					    false, false, &visible,
> +					    DRM_ROTATE_0);
>  	if (ret)
>  		return ret;
>  
> diff --git a/include/drm/drm_plane_helper.h b/include/drm/drm_plane_helper.h
> index a185392..ef9eb04 100644
> --- a/include/drm/drm_plane_helper.h
> +++ b/include/drm/drm_plane_helper.h
> @@ -84,7 +84,8 @@ extern int drm_plane_helper_check_update(struct drm_plane *plane,
>  					 int max_scale,
>  					 bool can_position,
>  					 bool can_update_disabled,
> -					 bool *visible);
> +					 bool *visible,
> +					 unsigned int rotation);
>  extern int drm_primary_helper_update(struct drm_plane *plane,
>  				     struct drm_crtc *crtc,
>  				     struct drm_framebuffer *fb,
> -- 
> 1.7.10.4
> 
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@xxxxxxxxxxxxxxxxxxxxx
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx

-- 
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux