On Mon, Jan 12, 2015 at 02:59:57PM +0100, Philipp Zabel wrote: > Am Montag, den 12.01.2015, 12:25 +0000 schrieb Russell King - ARM Linux: > > It's not quite that simple, because the SPDIF AP pins are multiplexed > > with the I2S pins - and there is variation between chip models and > > packages. > > > > So, it's probably best if port@0 is the video port, and then port@1..n > > can describe the audio inputs, including a property which specifies > > whether they are I2S or SPDIF, and the value to be programmed into > > the AP enable register (which is a bit field of the AP pins which > > should be unmasked.) I guess we can re-use the reg= property for that > > value, since video will always be zero. > > Note that of_graph_parse_endpoint interprets the port node's reg > property as port id. And the unit address part of the node name should > match the first address in the reg property. So that's not going to work very well... because the AP register is a bitmask. I guess we could specify a node unit and reg, which the code otherwise ignores, and specify a philipps,ap-mask = property for the audio ports instead. -- FTTC broadband for 0.8mile line: currently at 10.5Mbps down 400kbps up according to speedtest.net. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
