On Thu, 8 Jan 2015 16:53:41 +0200 Jyri Sarha <jsarha@xxxxxx> wrote: > > + - audio-ports: must contain one or two values selecting the source > > + in the audio port. > > + The source type is given by the corresponding entry in > > + the audio-port-names property. > > + > > This binding does not allow multi channel i2s setups with multiple i2s > pins. It would be nice to support that in the DT binding, even if the > code is not yet ready for it. > > How about having these two optional properties instead of audio-ports > and audio-port-names: > > audio-port-i2s: Upto 4 values for selecting pins for i2s port > audio-port-spdif: Value for selecting input pin for spdif port > > Presence of one of the properties would be mandatory and both are allowed. > > Sorry to notice this only now, but I have not yet looked the drm side > changes too closely. >From Andrew's datasheet, the TDA998x's which are handled by the tda998x driver have only 4 input audio pins, the first two ones being either S/PDIF or I2s, the last ones being I2S only. So, the DT description could be reduced to a simple list indexed by the pin number (= DAI number) and defining the protocol type. Examples: - for the Cubox: audio-inputs = "i2s", "spdif"; - for some other board with I2S on the pins 3 and 4 only: audio-inputs = "none", "none", "i2s", "i2s"; - for a fully wired TDA9983B (no driver yet): audio-inputs = "i2s", "i2s", "i2s", "i2s", "spdif"; -- Ken ar c'hentañ | ** Breizh ha Linux atav! ** Jef | http://moinejf.free.fr/ _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
