With I2S input, the CTS_N predivider depends on the sample width. Signed-off-by: Jean-Francois Moine <moinejf@xxxxxxx> --- drivers/gpu/drm/i2c/tda998x_drv.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c index a26a516..8af84cd 100644 --- a/drivers/gpu/drm/i2c/tda998x_drv.c +++ b/drivers/gpu/drm/i2c/tda998x_drv.c @@ -50,6 +50,7 @@ struct tda998x_priv { wait_queue_head_t wq_edid; volatile int wq_edid_wait; struct drm_encoder *encoder; + int audio_sample_format; u8 audio_ports[2]; #ifdef WITH_CODEC @@ -671,7 +672,17 @@ tda998x_configure_audio(struct tda998x_priv *priv, reg_write(priv, REG_MUX_AP, MUX_AP_SELECT_I2S); clksel_aip = AIP_CLKSEL_AIP_I2S; clksel_fs = AIP_CLKSEL_FS_ACLK; - cts_n = CTS_N_M(3) | CTS_N_K(3); + + /* with I2S input, the CTS_N predivider depends on + * the sample width */ + switch (priv->audio_sample_format) { + case SNDRV_PCM_FORMAT_S16_LE: + cts_n = CTS_N_M(3) | CTS_N_K(1); + break; + default: + cts_n = CTS_N_M(3) | CTS_N_K(3); + break; + } break; default: @@ -778,7 +789,8 @@ static int tda998x_set_audio_input(struct device *dev, /* if same audio parameters, just enable the audio port */ if (p->audio_cfg == priv->audio_ports[port_index] && - p->audio_sample_rate == sample_rate) { + p->audio_sample_rate == sample_rate && + priv->audio_sample_format == sample_format) { reg_write(priv, REG_ENA_AP, p->audio_cfg); return 0; } @@ -787,6 +799,7 @@ static int tda998x_set_audio_input(struct device *dev, p->audio_clk_cfg = port_index == PORT_SPDIF ? 0 : 1; p->audio_cfg = priv->audio_ports[port_index]; p->audio_sample_rate = sample_rate; + priv->audio_sample_format = sample_format; tda998x_configure_audio(priv, &priv->encoder->crtc->hwmode, p); return 0; } @@ -1388,6 +1401,7 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv) priv->params.audio_frame[1] = 1; /* channels - 1 */ priv->params.audio_sample_rate = 48000; /* 48kHz */ + priv->audio_sample_format = SNDRV_PCM_FORMAT_S24_LE; priv->current_page = 0xff; priv->hdmi = client; -- 2.1.4 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel