Re: [PATCH] drm: tda998x: Use drm_do_get_edid()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Russell,

On Wednesday 26 November 2014 21:04:15 Laurent Pinchart wrote:
> Replace the internal EDID read implementation by a call to the new EDID
> read core function.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>

Do you plan to take this patch in your tree or should I send a pull request to 
Dave directly ?

> ---
>  drivers/gpu/drm/i2c/tda998x_drv.c | 86 +++++++-----------------------------
>  1 file changed, 18 insertions(+), 68 deletions(-)
> 
> This patch has been compile-tested only as I lack test hardware. It depends
> on "[PATCH v4 6/9] drm: Decouple EDID parsing from I2C adapter" previously
> posted to the dri-devel mailing list.
> 
> diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c
> b/drivers/gpu/drm/i2c/tda998x_drv.c index d4762799351d..a267a78a0d0a 100644
> --- a/drivers/gpu/drm/i2c/tda998x_drv.c
> +++ b/drivers/gpu/drm/i2c/tda998x_drv.c
> @@ -1011,8 +1011,9 @@ tda998x_encoder_detect(struct tda998x_priv *priv)
>  			connector_status_disconnected;
>  }
> 
> -static int read_edid_block(struct tda998x_priv *priv, uint8_t *buf, int
> blk) +static int read_edid_block(void *data, u8 *buf, unsigned int blk,
> size_t length) {
> +	struct tda998x_priv *priv = data;
>  	uint8_t offset, segptr;
>  	int ret, i;
> 
> @@ -1056,8 +1057,8 @@ static int read_edid_block(struct tda998x_priv *priv,
> uint8_t *buf, int blk) return -ETIMEDOUT;
>  	}
> 
> -	ret = reg_read_range(priv, REG_EDID_DATA_0, buf, EDID_LENGTH);
> -	if (ret != EDID_LENGTH) {
> +	ret = reg_read_range(priv, REG_EDID_DATA_0, buf, length);
> +	if (ret != length) {
>  		dev_err(&priv->hdmi->dev, "failed to read edid block %d: %d\n",
>  			blk, ret);
>  		return ret;
> @@ -1066,82 +1067,31 @@ static int read_edid_block(struct tda998x_priv
> *priv, uint8_t *buf, int blk) return 0;
>  }
> 
> -static uint8_t *do_get_edid(struct tda998x_priv *priv)
> +static int
> +tda998x_encoder_get_modes(struct tda998x_priv *priv,
> +			  struct drm_connector *connector)
>  {
> -	int j, valid_extensions = 0;
> -	uint8_t *block, *new;
> -	bool print_bad_edid = drm_debug & DRM_UT_KMS;
> -
> -	if ((block = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL)
> -		return NULL;
> +	struct edid *edid;
> +	int n;
> 
>  	if (priv->rev == TDA19988)
>  		reg_clear(priv, REG_TX4, TX4_PD_RAM);
> 
> -	/* base block fetch */
> -	if (read_edid_block(priv, block, 0))
> -		goto fail;
> -
> -	if (!drm_edid_block_valid(block, 0, print_bad_edid))
> -		goto fail;
> -
> -	/* if there's no extensions, we're done */
> -	if (block[0x7e] == 0)
> -		goto done;
> -
> -	new = krealloc(block, (block[0x7e] + 1) * EDID_LENGTH, GFP_KERNEL);
> -	if (!new)
> -		goto fail;
> -	block = new;
> -
> -	for (j = 1; j <= block[0x7e]; j++) {
> -		uint8_t *ext_block = block + (valid_extensions + 1) * EDID_LENGTH;
> -		if (read_edid_block(priv, ext_block, j))
> -			goto fail;
> -
> -		if (!drm_edid_block_valid(ext_block, j, print_bad_edid))
> -			goto fail;
> +	edid = drm_do_get_edid(connector, read_edid_block, priv);
> 
> -		valid_extensions++;
> -	}
> -
> -	if (valid_extensions != block[0x7e]) {
> -		block[EDID_LENGTH-1] += block[0x7e] - valid_extensions;
> -		block[0x7e] = valid_extensions;
> -		new = krealloc(block, (valid_extensions + 1) * EDID_LENGTH, 
GFP_KERNEL);
> -		if (!new)
> -			goto fail;
> -		block = new;
> -	}
> -
> -done:
>  	if (priv->rev == TDA19988)
>  		reg_set(priv, REG_TX4, TX4_PD_RAM);
> 
> -	return block;
> -
> -fail:
> -	if (priv->rev == TDA19988)
> -		reg_set(priv, REG_TX4, TX4_PD_RAM);
> -	dev_warn(&priv->hdmi->dev, "failed to read EDID\n");
> -	kfree(block);
> -	return NULL;
> -}
> -
> -static int
> -tda998x_encoder_get_modes(struct tda998x_priv *priv,
> -			  struct drm_connector *connector)
> -{
> -	struct edid *edid = (struct edid *)do_get_edid(priv);
> -	int n = 0;
> -
> -	if (edid) {
> -		drm_mode_connector_update_edid_property(connector, edid);
> -		n = drm_add_edid_modes(connector, edid);
> -		priv->is_hdmi_sink = drm_detect_hdmi_monitor(edid);
> -		kfree(edid);
> +	if (!edid) {
> +		dev_warn(&priv->hdmi->dev, "failed to read EDID\n");
> +		return 0;
>  	}
> 
> +	drm_mode_connector_update_edid_property(connector, edid);
> +	n = drm_add_edid_modes(connector, edid);
> +	priv->is_hdmi_sink = drm_detect_hdmi_monitor(edid);
> +	kfree(edid);
> +
>  	return n;
>  }

-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel




[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux