Remove the function dsi_rr_formula() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@xxxxxxxxxxxxxxxxxx> --- drivers/gpu/drm/i915/intel_dsi_pll.c | 83 +--------------------------------- 1 file changed, 1 insertion(+), 82 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_dsi_pll.c b/drivers/gpu/drm/i915/intel_dsi_pll.c index fa7a6ca..20086e8 100644 --- a/drivers/gpu/drm/i915/intel_dsi_pll.c +++ b/drivers/gpu/drm/i915/intel_dsi_pll.c @@ -50,88 +50,7 @@ static const u32 lfsr_converts[] = { 71, 35 /* 91 - 92 */ }; -#ifdef DSI_CLK_FROM_RR - -static u32 dsi_rr_formula(const struct drm_display_mode *mode, - int pixel_format, int video_mode_format, - int lane_count, bool eotp) -{ - u32 bpp; - u32 hactive, vactive, hfp, hsync, hbp, vfp, vsync, vbp; - u32 hsync_bytes, hbp_bytes, hactive_bytes, hfp_bytes; - u32 bytes_per_line, bytes_per_frame; - u32 num_frames; - u32 bytes_per_x_frames, bytes_per_x_frames_x_lanes; - u32 dsi_bit_clock_hz; - u32 dsi_clk; - - switch (pixel_format) { - default: - case VID_MODE_FORMAT_RGB888: - case VID_MODE_FORMAT_RGB666_LOOSE: - bpp = 24; - break; - case VID_MODE_FORMAT_RGB666: - bpp = 18; - break; - case VID_MODE_FORMAT_RGB565: - bpp = 16; - break; - } - - hactive = mode->hdisplay; - vactive = mode->vdisplay; - hfp = mode->hsync_start - mode->hdisplay; - hsync = mode->hsync_end - mode->hsync_start; - hbp = mode->htotal - mode->hsync_end; - - vfp = mode->vsync_start - mode->vdisplay; - vsync = mode->vsync_end - mode->vsync_start; - vbp = mode->vtotal - mode->vsync_end; - - hsync_bytes = DIV_ROUND_UP(hsync * bpp, 8); - hbp_bytes = DIV_ROUND_UP(hbp * bpp, 8); - hactive_bytes = DIV_ROUND_UP(hactive * bpp, 8); - hfp_bytes = DIV_ROUND_UP(hfp * bpp, 8); - - bytes_per_line = DSI_HSS_PACKET_SIZE + hsync_bytes + - DSI_HSA_PACKET_EXTRA_SIZE + DSI_HSE_PACKET_SIZE + - hbp_bytes + DSI_HBP_PACKET_EXTRA_SIZE + - hactive_bytes + DSI_HACTIVE_PACKET_EXTRA_SIZE + - hfp_bytes + DSI_HFP_PACKET_EXTRA_SIZE; - - /* - * XXX: Need to accurately calculate LP to HS transition timeout and add - * it to bytes_per_line/bytes_per_frame. - */ - - if (eotp && video_mode_format == VIDEO_MODE_BURST) - bytes_per_line += DSI_EOTP_PACKET_SIZE; - - bytes_per_frame = vsync * bytes_per_line + vbp * bytes_per_line + - vactive * bytes_per_line + vfp * bytes_per_line; - - if (eotp && - (video_mode_format == VIDEO_MODE_NON_BURST_WITH_SYNC_PULSE || - video_mode_format == VIDEO_MODE_NON_BURST_WITH_SYNC_EVENTS)) - bytes_per_frame += DSI_EOTP_PACKET_SIZE; - - num_frames = drm_mode_vrefresh(mode); - bytes_per_x_frames = num_frames * bytes_per_frame; - - bytes_per_x_frames_x_lanes = bytes_per_x_frames / lane_count; - - /* the dsi clock is divided by 2 in the hardware to get dsi ddr clock */ - dsi_bit_clock_hz = bytes_per_x_frames_x_lanes * 8; - dsi_clk = dsi_bit_clock_hz / 1000; - - if (eotp && video_mode_format == VIDEO_MODE_BURST) - dsi_clk *= 2; - - return dsi_clk; -} - -#else +#ifndef DSI_CLK_FROM_RR /* Get DSI clock from pixel clock */ static u32 dsi_clk_from_pclk(u32 pclk, int pixel_format, int lane_count) -- 1.7.10.4 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel