Re: [PATCH] drm/atomic-helper: implementatations for legacy interfaces

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Nov 05, 2014 at 02:46:10PM +0100, Daniel Vetter wrote:
> Well, except page_flip since that requires async commit, which isn't
> there yet.
>
> For the functions which changes planes there's a bit of trickery
> involved to keep the fb refcounting working. But otherwise fairly
> straight-forward atomic updates.
>
> The property setting functions are still a bit incomplete. Once we
> have generic properties (e.g. rotation, but also all the properties
> needed by the atomic ioctl) we need to filter those out and parse them
> in the helper. Preferrably with the same function as used by the real
> atomic ioctl implementation.
>
> v2: Fixup kerneldoc, reported by Paulo.
>
> v3: Add missing EXPORT_SYMBOL.
>
> v4: We need to look at the crtc of the modeset, not some random
> leftover one from a previous loop when udpating the connector->crtc
> routing. Also push some local variables into inner loops to avoid
> these kinds of bugs.
>
> v5: Adjust semantics - drivers now own the atomic state upon
> successfully synchronous commit.
>
> v6: Use the set_crtc_for_plane function to assign the crtc, since
> otherwise the book-keeping is off.
>
> v7:
> - Improve comments.
> - Filter out the crtc of the ->set_config call when recomputing
>   crtc_state->enabled: We should compute the same state, but not doing
>   so will give us a good chance to catch bugs and inconsistencies -
>   the atomic helper's atomic_check function re-validates this again.
> - Fix the set_config implementation logic when disabling the crtc: We
>   still need to update the output routing to disable all the
>   connectors properly in the state. Caught by the atomic_check
>   functions, so at least that part worked ;-) Also add some WARN_ONs
>   to ensure ->set_config preconditions all apply.
>
> v8: Fixup an embarrassing h/vdisplay mixup.
>
> v9: Shuffled bad squash to the right patch, spotted by Daniel
>
> v10: Use set_crtc_for_connector as suggested by Sean.
>
> v11: Daniel Thompson noticed that my error handling is inconsistent
> and that in a few cases I didn't handle fatal errors (i.e. not
> -EDEADLK). Fix this by consolidate the ww mutex backoff handling
> into one check in the fail: block and flatten the error control
> flow everywhere else.
>
> Cc: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
> Cc: Sean Paul <seanpaul@xxxxxxxxxxxx>
> Cc: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
> Cc: Paulo Zanoni <przanoni@xxxxxxxxx>
> Signed-off-by: Daniel Vetter <daniel.vetter@xxxxxxxx>

Looks good to me, a couple nits.

Reviewed-by: Sean Paul <seanpaul@xxxxxxxxxxxx>

> ---
>  drivers/gpu/drm/drm_atomic_helper.c | 504 +++++++++++++++++++++++++++++++++++-
>  include/drm/drm_atomic_helper.h     |  21 ++
>  2 files changed, 524 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
> index 887e1971c915..b84581f8c8fc 100644
> --- a/drivers/gpu/drm/drm_atomic_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_helper.c
> @@ -86,6 +86,7 @@ steal_encoder(struct drm_atomic_state *state,
>   struct drm_crtc_state *crtc_state;
>   struct drm_connector *connector;
>   struct drm_connector_state *connector_state;
> + int ret;
>
>   /*
>   * We can only steal an encoder coming from a connector, which means we
> @@ -116,7 +117,9 @@ steal_encoder(struct drm_atomic_state *state,
>   if (IS_ERR(connector_state))
>   return PTR_ERR(connector_state);
>
> - connector_state->crtc = NULL;
> + ret = drm_atomic_set_crtc_for_connector(connector_state, NULL);
> + if (ret)
> + return ret;
>   connector_state->best_encoder = NULL;
>   }
>
> @@ -1045,3 +1048,502 @@ void drm_atomic_helper_swap_state(struct drm_device *dev,
>   }
>  }
>  EXPORT_SYMBOL(drm_atomic_helper_swap_state);
> +
> +/**
> + * drm_atomic_helper_update_plane - Helper for primary plane update using atomic
> + * @plane: plane object to update
> + * @crtc: owning CRTC of owning plane
> + * @fb: framebuffer to flip onto plane
> + * @crtc_x: x offset of primary plane on crtc
> + * @crtc_y: y offset of primary plane on crtc
> + * @crtc_w: width of primary plane rectangle on crtc
> + * @crtc_h: height of primary plane rectangle on crtc
> + * @src_x: x offset of @fb for panning
> + * @src_y: y offset of @fb for panning
> + * @src_w: width of source rectangle in @fb
> + * @src_h: height of source rectangle in @fb
> + *
> + * Provides a default plane update handler using the atomic driver interface.
> + *
> + * RETURNS:
> + * Zero on success, error code on failure
> + */
> +int drm_atomic_helper_update_plane(struct drm_plane *plane,
> +   struct drm_crtc *crtc,
> +   struct drm_framebuffer *fb,
> +   int crtc_x, int crtc_y,
> +   unsigned int crtc_w, unsigned int crtc_h,
> +   uint32_t src_x, uint32_t src_y,
> +   uint32_t src_w, uint32_t src_h)
> +{
> + struct drm_atomic_state *state;
> + struct drm_plane_state *plane_state;
> + int ret = 0;
> +
> + state = drm_atomic_state_alloc(plane->dev);
> + if (!state)
> + return -ENOMEM;
> +
> + state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
> +retry:
> + plane_state = drm_atomic_get_plane_state(state, plane);
> + if (IS_ERR(plane_state)) {
> + ret = PTR_ERR(plane_state);
> + goto fail;
> + }
> +
> + ret = drm_atomic_set_crtc_for_plane(plane_state, crtc);
> + if (ret != 0)
> + goto fail;
> + plane_state->fb = fb;
> + plane_state->crtc_x = crtc_x;
> + plane_state->crtc_y = crtc_y;
> + plane_state->crtc_h = crtc_h;
> + plane_state->crtc_w = crtc_w;
> + plane_state->src_x = src_x;
> + plane_state->src_y = src_y;
> + plane_state->src_h = src_h;
> + plane_state->src_w = src_w;
> +
> + ret = drm_atomic_commit(state);
> + if (ret != 0)
> + goto fail;
> +
> + /* Driver takes ownership of state on successful commit. */
> + return 0;
> +fail:
> + if (ret == -EDEADLK)
> + goto backoff;
> +
> + drm_atomic_state_free(state);
> +
> + return ret;
> +backoff:
> + drm_atomic_legacy_backoff(state);
> + drm_atomic_state_clear(state);
> +
> + /*
> + * Someone might have exchanged the framebuffer while we dropped locks
> + * in the backoff code. We need to fix up the fb refcount tracking the
> + * core does for us.
> + */
> + plane->old_fb = plane->fb;
> +
> + goto retry;
> +}
> +EXPORT_SYMBOL(drm_atomic_helper_update_plane);
> +
> +/**
> + * drm_atomic_helper_disable_plane - Helper for primary plane disable using * atomic
> + * @plane: plane to disable
> + *
> + * Provides a default plane disablle handler using the atomic driver interface.

s/disablle/disable/

> + *
> + * RETURNS:
> + * Zero on success, error code on failure
> + */
> +int drm_atomic_helper_disable_plane(struct drm_plane *plane)
> +{
> + struct drm_atomic_state *state;
> + struct drm_plane_state *plane_state;
> + int ret = 0;
> +
> + state = drm_atomic_state_alloc(plane->dev);
> + if (!state)
> + return -ENOMEM;
> +
> + state->acquire_ctx = drm_modeset_legacy_acquire_ctx(plane->crtc);
> +retry:
> + plane_state = drm_atomic_get_plane_state(state, plane);
> + if (IS_ERR(plane_state)) {
> + ret = PTR_ERR(plane_state);
> + goto fail;
> + }
> +
> + ret = drm_atomic_set_crtc_for_plane(plane_state, NULL);
> + if (ret != 0)
> + goto fail;
> + plane_state->fb = NULL;
> + plane_state->crtc_x = 0;
> + plane_state->crtc_y = 0;
> + plane_state->crtc_h = 0;
> + plane_state->crtc_w = 0;
> + plane_state->src_x = 0;
> + plane_state->src_y = 0;
> + plane_state->src_h = 0;
> + plane_state->src_w = 0;
> +
> + ret = drm_atomic_commit(state);
> + if (ret != 0)
> + goto fail;
> +
> + /* Driver takes ownership of state on successful commit. */
> + return 0;
> +fail:
> + if (ret == -EDEADLK)
> + goto backoff;
> +
> + drm_atomic_state_free(state);
> +
> + return ret;
> +backoff:
> + drm_atomic_legacy_backoff(state);
> + drm_atomic_state_clear(state);
> +
> + /*
> + * Someone might have exchanged the framebuffer while we dropped locks
> + * in the backoff code. We need to fix up the fb refcount tracking the
> + * core does for us.
> + */
> + plane->old_fb = plane->fb;
> +
> + goto retry;
> +}
> +EXPORT_SYMBOL(drm_atomic_helper_disable_plane);
> +
> +static int update_output_state(struct drm_atomic_state *state,
> +       struct drm_mode_set *set)
> +{
> + struct drm_device *dev = set->crtc->dev;
> + struct drm_connector_state *conn_state;
> + int nconnectors = state->dev->mode_config.num_connector;
> + int ncrtcs = state->dev->mode_config.num_crtc;
> + int ret, i, j;
> +
> + ret = drm_modeset_lock(&dev->mode_config.connection_mutex,
> +       state->acquire_ctx);
> + if (ret)
> + return ret;
> +
> + /* First grab all affected connector/crtc states. */
> + for (i = 0; i < set->num_connectors; i++) {
> + conn_state = drm_atomic_get_connector_state(state,
> +    set->connectors[i]);
> + if (IS_ERR(conn_state))
> + return PTR_ERR(conn_state);
> + }
> +
> + for (i = 0; i < ncrtcs; i++) {
> + struct drm_crtc *crtc = state->crtcs[i];
> +
> + if (!crtc)
> + continue;
> +
> + ret = drm_atomic_add_affected_connectors(state, crtc);
> + if (ret)
> + return ret;
> + }
> +
> + /* Then recompute connector->crtc links and crtc enabling state. */
> + for (i = 0; i < nconnectors; i++) {
> + struct drm_connector *connector;
> +
> + connector = state->connectors[i];
> + conn_state = state->connector_states[i];
> +
> + if (!connector)
> + continue;
> +
> + if (conn_state->crtc == set->crtc) {
> + ret = drm_atomic_set_crtc_for_connector(conn_state,
> + NULL);
> + if (ret)
> + return ret;
> + }
> +
> + for (j = 0; j < set->num_connectors; j++) {
> + if (set->connectors[j] == connector) {
> + ret = drm_atomic_set_crtc_for_connector(conn_state,
> + set->crtc);
> + if (ret)
> + return ret;
> + break;
> + }
> + }
> + }
> +
> + for (i = 0; i < ncrtcs; i++) {
> + struct drm_crtc *crtc = state->crtcs[i];
> + struct drm_crtc_state *crtc_state = state->crtc_states[i];
> +
> + if (!crtc && crtc != set->crtc)

I think this should be an ||

> + continue;
> +
> + crtc_state->enable =
> + drm_atomic_connectors_for_crtc(state, crtc);
> + }
> +
> + return 0;
> +}
> +
> +/**
> + * drm_atomic_helper_set_config - set a new config from userspace
> + * @set: mode set configuration
> + *
> + * Provides a default crtc set_config handler using the atomic driver interface.
> + *
> + * Returns:
> + * Returns 0 on success, negative errno numbers on failure.
> + */
> +int drm_atomic_helper_set_config(struct drm_mode_set *set)
> +{
> + struct drm_atomic_state *state;
> + struct drm_crtc *crtc = set->crtc;
> + struct drm_crtc_state *crtc_state;
> + struct drm_plane_state *primary_state;
> + int ret = 0;
> +
> + state = drm_atomic_state_alloc(crtc->dev);
> + if (!state)
> + return -ENOMEM;
> +
> + state->acquire_ctx = drm_modeset_legacy_acquire_ctx(crtc);
> +retry:
> + crtc_state = drm_atomic_get_crtc_state(state, crtc);
> + if (IS_ERR(crtc_state)) {
> + ret = PTR_ERR(crtc_state);
> + goto fail;
> + }
> +
> + if (!set->mode) {
> + WARN_ON(set->fb);
> + WARN_ON(set->num_connectors);
> +
> + crtc_state->enable = false;
> + goto commit;
> + }
> +
> + WARN_ON(!set->fb);
> + WARN_ON(!set->num_connectors);
> +
> + crtc_state->enable = true;
> + drm_mode_copy(&crtc_state->mode, set->mode);
> +
> + primary_state = drm_atomic_get_plane_state(state, crtc->primary);
> + if (IS_ERR(primary_state)) {
> + ret = PTR_ERR(primary_state);
> + goto fail;
> + }
> +
> + ret = drm_atomic_set_crtc_for_plane(primary_state, crtc);
> + if (ret != 0)
> + goto fail;
> + primary_state->fb = set->fb;
> + primary_state->crtc_x = 0;
> + primary_state->crtc_y = 0;
> + primary_state->crtc_h = set->mode->vdisplay;
> + primary_state->crtc_w = set->mode->hdisplay;
> + primary_state->src_x = set->x << 16;
> + primary_state->src_y = set->y << 16;
> + primary_state->src_h = set->mode->vdisplay << 16;
> + primary_state->src_w = set->mode->hdisplay << 16;
> +
> +commit:
> + ret = update_output_state(state, set);
> + if (ret)
> + goto fail;
> +
> + ret = drm_atomic_commit(state);
> + if (ret != 0)
> + goto fail;
> +
> + /* Driver takes ownership of state on successful commit. */
> + return 0;
> +fail:
> + if (ret == -EDEADLK)
> + goto backoff;
> +
> + drm_atomic_state_free(state);
> +
> + return ret;
> +backoff:
> + drm_atomic_legacy_backoff(state);
> + drm_atomic_state_clear(state);
> +
> + /*
> + * Someone might have exchanged the framebuffer while we dropped locks
> + * in the backoff code. We need to fix up the fb refcount tracking the
> + * core does for us.
> + */
> + crtc->primary->old_fb = crtc->primary->fb;
> +
> + goto retry;
> +}
> +EXPORT_SYMBOL(drm_atomic_helper_set_config);
> +
> +/**
> + * drm_atomic_helper_crtc_set_property - helper for crtc prorties
> + * @crtc: DRM crtc
> + * @property: DRM property
> + * @val: value of property
> + *
> + * Provides a default plane disablle handler using the atomic driver interface.
> + *
> + * RETURNS:
> + * Zero on success, error code on failure
> + */
> +int
> +drm_atomic_helper_crtc_set_property(struct drm_crtc *crtc,
> +    struct drm_property *property,
> +    uint64_t val)
> +{
> + struct drm_atomic_state *state;
> + struct drm_crtc_state *crtc_state;
> + int ret = 0;
> +
> + state = drm_atomic_state_alloc(crtc->dev);
> + if (!state)
> + return -ENOMEM;
> +
> + /* ->set_property is always called with all locks held. */
> + state->acquire_ctx = crtc->dev->mode_config.acquire_ctx;
> +retry:
> + crtc_state = drm_atomic_get_crtc_state(state, crtc);
> + if (IS_ERR(crtc_state)) {
> + ret = PTR_ERR(crtc_state);
> + goto fail;
> + }
> +
> + ret = crtc->funcs->atomic_set_property(crtc, crtc_state,
> +       property, val);
> + if (ret)
> + goto fail;
> +
> + ret = drm_atomic_commit(state);
> + if (ret != 0)
> + goto fail;
> +
> + /* Driver takes ownership of state on successful commit. */
> + return 0;
> +fail:
> + if (ret == -EDEADLK)
> + goto backoff;
> +
> + drm_atomic_state_free(state);
> +
> + return ret;
> +backoff:
> + drm_atomic_legacy_backoff(state);
> + drm_atomic_state_clear(state);
> +
> + goto retry;
> +}
> +EXPORT_SYMBOL(drm_atomic_helper_crtc_set_property);
> +
> +/**
> + * drm_atomic_helper_plane_set_property - helper for plane prorties
> + * @plane: DRM plane
> + * @property: DRM property
> + * @val: value of property
> + *
> + * Provides a default plane disable handler using the atomic driver interface.
> + *
> + * RETURNS:
> + * Zero on success, error code on failure
> + */
> +int
> +drm_atomic_helper_plane_set_property(struct drm_plane *plane,
> +    struct drm_property *property,
> +    uint64_t val)
> +{
> + struct drm_atomic_state *state;
> + struct drm_plane_state *plane_state;
> + int ret = 0;
> +
> + state = drm_atomic_state_alloc(plane->dev);
> + if (!state)
> + return -ENOMEM;
> +
> + /* ->set_property is always called with all locks held. */
> + state->acquire_ctx = plane->dev->mode_config.acquire_ctx;
> +retry:
> + plane_state = drm_atomic_get_plane_state(state, plane);
> + if (IS_ERR(plane_state)) {
> + ret = PTR_ERR(plane_state);
> + goto fail;
> + }
> +
> + ret = plane->funcs->atomic_set_property(plane, plane_state,
> +       property, val);
> + if (ret)
> + goto fail;
> +
> + ret = drm_atomic_commit(state);
> + if (ret != 0)
> + goto fail;
> +
> + /* Driver takes ownership of state on successful commit. */
> + return 0;
> +fail:
> + if (ret == -EDEADLK)
> + goto backoff;
> +
> + drm_atomic_state_free(state);
> +
> + return ret;
> +backoff:
> + drm_atomic_legacy_backoff(state);
> + drm_atomic_state_clear(state);
> +
> + goto retry;
> +}
> +EXPORT_SYMBOL(drm_atomic_helper_plane_set_property);
> +
> +/**
> + * drm_atomic_helper_connector_set_property - helper for connector prorties
> + * @connector: DRM connector
> + * @property: DRM property
> + * @val: value of property
> + *
> + * Provides a default plane disablle handler using the atomic driver interface.
> + *
> + * RETURNS:
> + * Zero on success, error code on failure
> + */
> +int
> +drm_atomic_helper_connector_set_property(struct drm_connector *connector,
> +    struct drm_property *property,
> +    uint64_t val)
> +{
> + struct drm_atomic_state *state;
> + struct drm_connector_state *connector_state;
> + int ret = 0;
> +
> + state = drm_atomic_state_alloc(connector->dev);
> + if (!state)
> + return -ENOMEM;
> +
> + /* ->set_property is always called with all locks held. */
> + state->acquire_ctx = connector->dev->mode_config.acquire_ctx;
> +retry:
> + connector_state = drm_atomic_get_connector_state(state, connector);
> + if (IS_ERR(connector_state)) {
> + ret = PTR_ERR(connector_state);
> + goto fail;
> + }
> +
> + ret = connector->funcs->atomic_set_property(connector, connector_state,
> +       property, val);
> + if (ret)
> + goto fail;
> +
> + ret = drm_atomic_commit(state);
> + if (ret != 0)
> + goto fail;
> +
> + /* Driver takes ownership of state on successful commit. */
> + return 0;
> +fail:
> + if (ret == -EDEADLK)
> + goto backoff;
> +
> + drm_atomic_state_free(state);
> +
> + return ret;
> +backoff:
> + drm_atomic_legacy_backoff(state);
> + drm_atomic_state_clear(state);
> +
> + goto retry;
> +}
> +EXPORT_SYMBOL(drm_atomic_helper_connector_set_property);
> diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h
> index 9781ce739e10..8cd6fe7a48e5 100644
> --- a/include/drm/drm_atomic_helper.h
> +++ b/include/drm/drm_atomic_helper.h
> @@ -49,4 +49,25 @@ void drm_atomic_helper_cleanup_planes(struct drm_device *dev,
>  void drm_atomic_helper_swap_state(struct drm_device *dev,
>    struct drm_atomic_state *state);
>
> +/* implementations for legacy interfaces */
> +int drm_atomic_helper_update_plane(struct drm_plane *plane,
> +   struct drm_crtc *crtc,
> +   struct drm_framebuffer *fb,
> +   int crtc_x, int crtc_y,
> +   unsigned int crtc_w, unsigned int crtc_h,
> +   uint32_t src_x, uint32_t src_y,
> +   uint32_t src_w, uint32_t src_h);
> +int drm_atomic_helper_disable_plane(struct drm_plane *plane);
> +int drm_atomic_helper_set_config(struct drm_mode_set *set);
> +
> +int drm_atomic_helper_crtc_set_property(struct drm_crtc *crtc,
> + struct drm_property *property,
> + uint64_t val);
> +int drm_atomic_helper_plane_set_property(struct drm_plane *plane,
> + struct drm_property *property,
> + uint64_t val);
> +int drm_atomic_helper_connector_set_property(struct drm_connector *connector,
> + struct drm_property *property,
> + uint64_t val);
> +
>  #endif /* DRM_ATOMIC_HELPER_H_ */
> --
> 2.1.1
>
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel





[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux