[+cc Alex Williamson, Rajat] On Tue, Oct 28, 2014 at 9:45 AM, Alex Deucher <alexdeucher@xxxxxxxxx> wrote: > On Mon, Oct 27, 2014 at 12:44 PM, Bjorn Helgaas <bhelgaas@xxxxxxxxxx> wrote: >> On Sun, Oct 26, 2014 at 11:31 AM, Alex Deucher <alexdeucher@xxxxxxxxx> wrote: >>> On Mon, Oct 13, 2014 at 12:11 PM, Bjorn Helgaas <bhelgaas@xxxxxxxxxx> wrote: >>>> [+cc Alex, Christian, dri-devel] >>>> >>>> On Sat, Oct 11, 2014 at 1:37 PM, Shawn Starr <shawn.starr@xxxxxxxxxx> wrote: >>>>> On September 11, 2014 04:26:21 PM Bjorn Helgaas wrote: >>>>>> [+cc linux-pci] >>>>>> >>>>>> On Sat, Aug 2, 2014 at 10:02 AM, Shawn Starr <shawn.starr@xxxxxxxxxx> wrote: >>>>>> > Hello devs, >>>>>> > >>>>>> > There are two issues I am encountering with the PCIe Hotplug driver on my >>>>>> > Lenovo Laptop (W500). I note this goes back further than 3.15. >>>>>> > >>>>>> > It is noted here: >>>>>> > http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id= >>>>>> > f244d8b623dae7a7bc695b0336f67729b95a9736 >>>>>> > https://bugzilla.kernel.org/show_bug.cgi?id=79701 >>>>>> > >>>>>> > And my open bug here: >>>>>> > https://bugzilla.kernel.org/show_bug.cgi?id=77261 >>>>>> > >>>>>> > 1) If I enable the device to use both the integrated and discrete GPU, >>>>>> > pciehp will decide to force unload radeon because it puts itself into a >>>>>> > power saving state, fails back to the Intel integrated GPU in this case >>>>>> > unless I tell radeon.ko to runpm=0 (no power management, then pciehp wont >>>>>> > touch it). >>>>>> > >>>>>> > 2) If the Radeon GPU resets and you use pci_reset=1 for kernel module >>>>>> > option, pciehp decides to force unload radeon even though the GPU is >>>>>> > trying to setup after failing. >>>>>> > >>>>>> > Kernel I am using right now: 3.16.0-0.rc7.git3.1.fc21.x86_64 (about to >>>>>> > boot into snapshot kernel-core-3.16.0-0.rc7.git4.1.fc21.x86_64) >>>>>> Hi Shawn, >>>>>> >>>>>> Thanks for the report and sorry that it got dropped. But I see you're >>>>>> cc'd on https://bugzilla.kernel.org/show_bug.cgi?id=79701, so you've >>>>>> probably seen the work there. If you can try out the patches I just >>>>>> posted, that would be great. >>>>>> >>>>>> Bjorn >>>>> >>>>> Hi Bjorn, >>>>> >>>>> For #1) This is fixed in linux-next (tracking 3.18.0-0.rc0.git1.2.fc22.1.x86_64 >>>>> nondebug kernel for Fedora). PCIe HotPlug no longer unloads radeon. For this >>>>> bugzilla report we can close it. >>>>> >>>>> #2) This still has weird results however, radeon.hard_reset=1 is experimental >>>>> and while it attempts to reset GPU, PCIe HotPlug seems to interact in this. >>>>> >>>>> This can be tested by adding to grub command line radeon.hard_reset=1. >>>>> When X has started up, trigger a reset by cat >>>>> /sys/kernel/debug/dri/#/radeon_gpu_reset. It will output 0, cat it again will >>>>> show 1. >>>>> >>>>> Attempt to drag a window. The this will trigger a GPU reset, but fail to >>>>> recover, its unknown if PCIe HotPlug is preventing a proper reset or not but >>>>> there is pciehp calls in the stack trace. >>>> >>>> A PCIe device reset usually looks like a hotplug event because the >>>> PCIe link goes down and comes back up. As far as the PCI core is >>>> concerned, it can't tell the difference between (1) a simple reset >>>> where the link bounces and (2) removal of one device followed by >>>> addition of another. >>>> >>>> b440bde74f04 ("PCI: Add pci_ignore_hotplug() to ignore hotplug events >>>> for a device") addressed this for some similar cases, but it looks >>>> like we probably need some more calls to pci_ignore_hotplug() in the >>>> radeon driver reset methods. >>>> >>>> Can you please open a bugzilla and attach the complete dmesg log, >>>> including the GPU reset and recovery failure? >>> >>> Is there a way we could temporarily disable pci hotplug around a GPU reset? >> >> There is pci_ignore_hotplug(). Do you mean something more? Oh, I >> guess you mean a way to disable, then *re*-enable hotplug. We can >> easily add that if that would help. > > Exactly. I was thinking I could disable hotplug, do the gpu hard > reset, then re-enable hotplug. That approach sounds fine to me. We're accumulating ways to deal with this issue, and I wonder if they could be unified a bit. At least the following are related: b440bde74f04 PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device 06a8d89af551 PCI: pciehp: Disable link notification across slot reset 2e35afaefe64 PCI: pciehp: Add reset_slot() method 2e35afaefe64 adds a pciehp reset method that disables presence detect notification and stops any pciehp polling for events. 06a8d89af551 extends that pciehp reset method to also disable link status notifications. b440bde74f04 adds an explicit interface for drivers (pci_ignore_hotplug()), since some drivers reset devices in device-specific ways rather than using the pci_reset_function() path. This leaves notifications enabled but ignores them if they arrive. And of course, this didn't add a way to *enable* hotplug again, which is what we need here. The b440bde74f04 approach is extensible to other hotplug drivers, but I am a little worried about races and polling. What happens if we ignore hotplug events, reset the device, start paying attention to hotplug events again, and *then* the hotplug interrupt arrives or the poll for events happens? Bjorn _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
