On 27/08/14 17:39, Ajay Kumar wrote:
> Add documentation for DT properties supported by ps8622/ps8625
> eDP-LVDS converter.
>
> Signed-off-by: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx>
> ---
> .../devicetree/bindings/video/bridge/ps8622.txt | 20 ++++++++++++++++++++
> 1 file changed, 20 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/video/bridge/ps8622.txt
>
> diff --git a/Documentation/devicetree/bindings/video/bridge/ps8622.txt b/Documentation/devicetree/bindings/video/bridge/ps8622.txt
> new file mode 100644
> index 0000000..0ec8172
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/video/bridge/ps8622.txt
> @@ -0,0 +1,20 @@
> +ps8622-bridge bindings
> +
> +Required properties:
> + - compatible: "parade,ps8622" or "parade,ps8625"
> + - reg: first i2c address of the bridge
> + - sleep-gpios: OF device-tree gpio specification for PD_ pin.
> + - reset-gpios: OF device-tree gpio specification for RST_ pin.
> +
> +Optional properties:
> + - lane-count: number of DP lanes to use
> + - use-external-pwm: backlight will be controlled by an external PWM
What does this mean? That the backlight support from ps8625 is not used?
If so, maybe "disable-pwm" or something?
> +
> +Example:
> + lvds-bridge@48 {
> + compatible = "parade,ps8622";
> + reg = <0x48>;
> + sleep-gpios = <&gpc3 6 1 0 0>;
> + reset-gpios = <&gpc3 1 1 0 0>;
> + lane-count = <1>;
> + };
>
I wish all new display component bindings would use the video
ports/endpoints to describe the connections. It will be very difficult
to improve the display driver model later if we're missing such critical
pieces from the DT bindings.
Tomi
Attachment:
signature.asc
Description: OpenPGP digital signature
_______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
