Hi Thierry, On Wednesday 30 July 2014 11:40:54 Thierry Reding wrote: > On Wed, Jul 30, 2014 at 11:54:00AM +0530, Ajay kumar wrote: > > On Tue, Jul 29, 2014 at 5:17 PM, Thierry Reding wrote: > > > On Tue, Jul 29, 2014 at 01:42:09PM +0200, Andreas Färber wrote: > > >> Am 29.07.2014 13:36, schrieb Thierry Reding: > > >> > On Tue, Jul 29, 2014 at 01:21:48PM +0200, Andreas Färber wrote: > > >> >> Am 28.07.2014 08:13, schrieb Ajay kumar: > > >> >>> On 7/27/14, Andreas Färber <afaerber@xxxxxxx> wrote: > > >> >>>> Am 25.07.2014 21:22, schrieb Ajay Kumar: > > >> >>>>> This series is based on exynos-drm-next branch of Inki Dae's tree > > >> >>>>> at: > > >> >>>>> git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos. > > >> >>>>> git > > >> >>>>> > > >> >>>>> I have tested this after adding few DT changes for > > >> >>>>> exynos5250-snow, > > >> >>>>> exynos5420-peach-pit and exynos5800-peach-pi boards. > > >> >>>> > > >> >>>> I'm trying to test this with a modified exynos5250-spring DT > > >> > > >> [...] > > >> > > >> >> Unfortunately the most I got on Spring with attached DT was a blank > > >> >> screen with a white horizontal line in the middle. > > >> >> > > >> >> Do I need to specify a specific panel model for Spring? > > >> > > >> [...] > > >> > > >> >> From 9172a26a8f0d0f0d170bd27e1c150ad204d8086a Mon Sep 17 00:00:00 > > >> >> 2001 > > >> >> From: =?UTF-8?q?Andreas=20F=C3=A4rber?= <afaerber@xxxxxxx> > > >> >> Date: Sun, 27 Jul 2014 21:58:06 +0200 > > >> >> Subject: [PATCH] ARM: dts: exynos5250: Add eDP/LVDS bridge to Spring > > >> >> MIME-Version: 1.0 > > >> >> Content-Type: text/plain; charset=UTF-8 > > >> >> Content-Transfer-Encoding: 8bit > > >> >> > > >> >> Signed-off-by: Ajay Kumar <ajaykumar.rs@xxxxxxxxxxx> > > >> >> [AF: Redone for v6] > > >> >> Signed-off-by: Andreas F??rber <afaerber@xxxxxxx> > > >> >> --- > > >> >> > > >> >> arch/arm/boot/dts/exynos5250-spring.dts | 32 +++++++++++++++++++++- > > >> >> 1 file changed, 31 insertions(+), 1 deletion(-) > > >> >> > > >> >> diff --git a/arch/arm/boot/dts/exynos5250-spring.dts > > >> >> b/arch/arm/boot/dts/exynos5250-spring.dts index > > >> >> 687dfab86bc8..517b1ff2bfdf 100644 > > >> >> --- a/arch/arm/boot/dts/exynos5250-spring.dts > > >> >> +++ b/arch/arm/boot/dts/exynos5250-spring.dts > > >> >> @@ -64,10 +64,14 @@ > > >> >> vdd_pll-supply = <&s5m_ldo8_reg>; > > >> >> }; > > >> >> > > >> >> + panel: panel { > > >> >> + compatible = "simple-panel"; > > >> >> + }; > > >> > > > >> > You can't do this. "simple-panel" isn't a valid panel model. It > > >> > should probably be removed from the platform_of_match table in the > > >> > driver. > > >> > > >> Okay, that means the Snow DT is wrong, too: > > >> https://patchwork.kernel.org/patch/4625441/ > > >> > > >> And the others specify it as fallback: > > >> https://patchwork.kernel.org/patch/4625461/ > > >> https://patchwork.kernel.org/patch/4625451/ > > > > > > A quick grep shows that many (all?) devices that use DRM panels provide > > > simple-panel as fallback. That's probably fine as long as they also do > > > provide the specific model. But given that simple-panel does not have a > > > mode or physical size, I don't think even that makes sense. > > > > On snow, the bridge chip provides the display mode instead of the panel. > > That is why display was working for me. > > Okay, I suppose under some circumstances that might make sense. Although > it's still always the panel that dictates the display timings, so the > panel node needs to have a panel model specific compatible value with a > matching entry in the panel-simple driver so that it can even be used in > setups without a bridge. > > One other thing: how does the bridge know which mode to drive? I suspect > that it can drive more than one mode? Can it freely be configured or > does it have a predefined set of modes? If the latter, then according to > what you said above there needs to be a way to configure the bridge (via > DT?) so that it reports the mode matching the panel. I wonder if that > should be handled completely in code, so that for example a bridge has a > panel attached it can use the panel's .get_modes() and select a matching > mode among the set that it supports. Yes, pretty please :-) I don't think it would be a good idea to duplicate mode information in the bridge DT node, as that's not a property of the bridge. Querying the mode at runtime is in my opinion a much better option, and would also allow switching between different modes at runtime when that makes sense. Now, I'm not sure whether it should be the bridge driver querying the panel driver directly, or the display controller driver doing it and then configuring the bridge accordingly. The latter seems more generic to me and doesn't rely on the assumption that the bridge output will always be directly connected to a panel. -- Regards, Laurent Pinchart _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel