In some cases like when PSR just got enabled the panel need more vblank
times to calculate CRC. I figured that out with the new PSR test cases
facing some cases that I had a green screen but a blank CRC. Even with
2 vblank waits on kernel + 2 vblank waits on test case.
So let's give up to 6 vblank wait time. However we now check for
TEST_CRC_COUNT that shows when panel finished to calculate CRC and
has it ready.
v2: Jani pointed out attempts decrements was wrong and should never reach
the error condition. And Daniel pointed out that EIO is more appropriated than
EGAIN. Also I realized that I have to read test_crc_count after setting
test_sink
v3: Rebase and adding error message
Cc: Todd Previte <tprevite@xxxxxxxxx>
Cc: Daniel Vetter <daniel.vetter@xxxxxxxx>
Cc: Jani Nikula <jani.nikula@xxxxxxxxx>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@xxxxxxxxx>
---
drivers/gpu/drm/i915/intel_dp.c | 23 +++++++++++++++++------
include/drm/drm_dp_helper.h | 5 +++--
2 files changed, 20 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index e4d0367..d9091dc7 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -3468,21 +3468,32 @@ int intel_dp_sink_crc(struct intel_dp *intel_dp, u8 *crc)
struct drm_device *dev = intel_dig_port->base.base.dev;
struct intel_crtc *intel_crtc =
to_intel_crtc(intel_dig_port->base.base.crtc);
- u8 buf[1];
+ u8 buf;
+ int test_crc_count;
+ int attempts = 6;
- if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, buf) < 0)
+ if (drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, &buf) < 0)
return -EIO;
- if (!(buf[0] & DP_TEST_CRC_SUPPORTED))
+ if (!(buf & DP_TEST_CRC_SUPPORTED))
return -ENOTTY;
if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_TEST_SINK,
DP_TEST_SINK_START) < 0)
return -EIO;
- /* Wait 2 vblanks to be sure we will have the correct CRC value */
- intel_wait_for_vblank(dev, intel_crtc->pipe);
- intel_wait_for_vblank(dev, intel_crtc->pipe);
+ drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, &buf);
+ test_crc_count = buf & DP_TEST_COUNT_MASK;
+
+ do {
+ drm_dp_dpcd_readb(&intel_dp->aux, DP_TEST_SINK_MISC, &buf);
+ intel_wait_for_vblank(dev, intel_crtc->pipe);
+ } while (--attempts && (buf & DP_TEST_COUNT_MASK) == test_crc_count);
+
+ if (attempts == 0) {
+ DRM_ERROR("Panel is unable to calculate CRC after 6 vblanks\n");
+ return -EIO;
+ }
if (drm_dp_dpcd_read(&intel_dp->aux, DP_TEST_CRC_R_CR, crc, 6) < 0)
return -EIO;
diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h
index 9305c71..8edeed0 100644
--- a/include/drm/drm_dp_helper.h
+++ b/include/drm/drm_dp_helper.h
@@ -303,7 +303,8 @@
#define DP_TEST_CRC_B_CB 0x244
#define DP_TEST_SINK_MISC 0x246
-#define DP_TEST_CRC_SUPPORTED (1 << 5)
+# define DP_TEST_CRC_SUPPORTED (1 << 5)
+# define DP_TEST_COUNT_MASK 0x7
#define DP_TEST_RESPONSE 0x260
# define DP_TEST_ACK (1 << 0)
@@ -313,7 +314,7 @@
#define DP_TEST_EDID_CHECKSUM 0x261
#define DP_TEST_SINK 0x270
-#define DP_TEST_SINK_START (1 << 0)
+# define DP_TEST_SINK_START (1 << 0)
#define DP_PAYLOAD_TABLE_UPDATE_STATUS 0x2c0 /* 1.2 MST */
# define DP_PAYLOAD_TABLE_UPDATED (1 << 0)
--
1.9.3
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
