Currently the DP_PHY_ENABLE register is mapped in the driver,
and accessed to control power to the PHY.
With mfd-syscon and regmap interface available at our disposal,
it's wise to use that instead of using a 'reg' property for the
controller and allocating a memory resource for that.
To facilitate this, we have added another compatible string
for Exynso5420 SoC to acquire driver data which contains
different DP-PHY-CONTROL register offset.
Signed-off-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>
Cc: Jingoo Han <jg1.han@xxxxxxxxxxx>
Cc: Kishon Vijay Abraham I <kishon@xxxxxx>
---
Changes since v1:
- state->regs should have been "struct regmap *" instead of
"void __iomem *". So corrected the same.
.../devicetree/bindings/phy/samsung-phy.txt | 7 +-
drivers/phy/phy-exynos-dp-video.c | 78 ++++++++++++++------
2 files changed, 60 insertions(+), 25 deletions(-)
diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt
index 7a6feea..15e0f2c 100644
--- a/Documentation/devicetree/bindings/phy/samsung-phy.txt
+++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt
@@ -17,8 +17,11 @@ Samsung EXYNOS SoC series Display Port PHY
-------------------------------------------------
Required properties:
-- compatible : should be "samsung,exynos5250-dp-video-phy";
-- reg : offset and length of the Display Port PHY register set;
+- compatible : should be one of the following supported values:
+ - "samsung,exynos5250-dp-video-phy"
+ - "samsung,exynos5420-dp-video-phy"
+- samsung,pmu-syscon: phandle for PMU system controller interface, used to
+ control pmu registers for power isolation.
- #phy-cells : from the generic PHY bindings, must be 0;
Samsung S5P/EXYNOS SoC series USB PHY
diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c
index 8b3026e..881ddb5 100644
--- a/drivers/phy/phy-exynos-dp-video.c
+++ b/drivers/phy/phy-exynos-dp-video.c
@@ -13,44 +13,58 @@
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/exynos5-pmu.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
+#include <linux/regmap.h>
/* DPTX_PHY_CONTROL register */
#define EXYNOS_DPTX_PHY_ENABLE (1 << 0)
+struct exynos_dp_video_phy_drvdata {
+ u32 phy_ctrl_offset;
+};
+
struct exynos_dp_video_phy {
- void __iomem *regs;
+ struct regmap *regs;
+ const struct exynos_dp_video_phy_drvdata *drvdata;
};
-static int __set_phy_state(struct exynos_dp_video_phy *state, unsigned int on)
+static void exynos_dp_video_phy_pwr_isol(struct exynos_dp_video_phy *state,
+ unsigned int on)
{
- u32 reg;
+ unsigned int val;
- reg = readl(state->regs);
- if (on)
- reg |= EXYNOS_DPTX_PHY_ENABLE;
- else
- reg &= ~EXYNOS_DPTX_PHY_ENABLE;
- writel(reg, state->regs);
+ if (IS_ERR(state->regs))
+ return;
- return 0;
+ val = on ? 0 : EXYNOS_DPTX_PHY_ENABLE;
+
+ regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset,
+ EXYNOS_DPTX_PHY_ENABLE, val);
}
static int exynos_dp_video_phy_power_on(struct phy *phy)
{
struct exynos_dp_video_phy *state = phy_get_drvdata(phy);
- return __set_phy_state(state, 1);
+ /* Disable power isolation on DP-PHY */
+ exynos_dp_video_phy_pwr_isol(state, 0);
+
+ return 0;
}
static int exynos_dp_video_phy_power_off(struct phy *phy)
{
struct exynos_dp_video_phy *state = phy_get_drvdata(phy);
- return __set_phy_state(state, 0);
+ /* Enable power isolation on DP-PHY */
+ exynos_dp_video_phy_pwr_isol(state, 1);
+
+ return 0;
}
static struct phy_ops exynos_dp_video_phy_ops = {
@@ -59,11 +73,31 @@ static struct phy_ops exynos_dp_video_phy_ops = {
.owner = THIS_MODULE,
};
+static const struct exynos_dp_video_phy_drvdata exynos5250_dp_video_phy = {
+ .phy_ctrl_offset = EXYNOS5_DPTX_PHY_CONTROL,
+};
+
+static const struct exynos_dp_video_phy_drvdata exynos5420_dp_video_phy = {
+ .phy_ctrl_offset = EXYNOS5420_DPTX_PHY_CONTROL,
+};
+
+static const struct of_device_id exynos_dp_video_phy_of_match[] = {
+ {
+ .compatible = "samsung,exynos5250-dp-video-phy",
+ .data = &exynos5250_dp_video_phy,
+ }, {
+ .compatible = "samsung,exynos5420-dp-video-phy",
+ .data = &exynos5420_dp_video_phy,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match);
+
static int exynos_dp_video_phy_probe(struct platform_device *pdev)
{
struct exynos_dp_video_phy *state;
struct device *dev = &pdev->dev;
- struct resource *res;
+ const struct of_device_id *match;
struct phy_provider *phy_provider;
struct phy *phy;
@@ -71,11 +105,15 @@ static int exynos_dp_video_phy_probe(struct platform_device *pdev)
if (!state)
return -ENOMEM;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
- state->regs = devm_ioremap_resource(dev, res);
- if (IS_ERR(state->regs))
+ state->regs = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "samsung,pmu-syscon");
+ if (IS_ERR(state->regs)) {
+ dev_err(dev, "Failed to lookup PMU regmap\n");
return PTR_ERR(state->regs);
+ }
+
+ match = of_match_node(exynos_dp_video_phy_of_match, dev->of_node);
+ state->drvdata = match->data;
phy = devm_phy_create(dev, NULL, &exynos_dp_video_phy_ops, NULL);
if (IS_ERR(phy)) {
@@ -89,12 +127,6 @@ static int exynos_dp_video_phy_probe(struct platform_device *pdev)
return PTR_ERR_OR_ZERO(phy_provider);
}
-static const struct of_device_id exynos_dp_video_phy_of_match[] = {
- { .compatible = "samsung,exynos5250-dp-video-phy" },
- { },
-};
-MODULE_DEVICE_TABLE(of, exynos_dp_video_phy_of_match);
-
static struct platform_driver exynos_dp_video_phy_driver = {
.probe = exynos_dp_video_phy_probe,
.driver = {
--
1.7.10.4
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
