On Thu, Mar 27, 2014 at 11:30:37AM -0600, Bjorn Helgaas wrote: > On Mon, Mar 24, 2014 at 4:04 PM, Bjorn Helgaas <bhelgaas@xxxxxxxxxx> wrote: > > On Sat, Mar 22, 2014 at 9:18 AM, Andy Lutomirski <luto@xxxxxxxxxxxxxx> wrote: > >> On Fri, Mar 21, 2014 at 9:37 AM, Bjorn Helgaas <bhelgaas@xxxxxxxxxx> wrote: > >>> On Fri, Mar 21, 2014 at 9:49 AM, Andy Lutomirski <luto@xxxxxxxxxxxxxx> wrote: > >>>> On Fri, Mar 21, 2014 at 7:41 AM, Alex Deucher <alexdeucher@xxxxxxxxx> wrote: > >>>>> On Thu, Mar 20, 2014 at 10:17 PM, Andy Lutomirski <luto@xxxxxxxxxxxxxx> wrote: > >>>>>> My system works on a 3.13 Fedora kernel. It does not work on a > >>>>>> more-or-less identically configured 3.14-rc7+ kernel. The symptom is > >>>>>> that the Plymouth password prompt flashes and them the screen goes > >>>>>> blank. Hitting escape brings back the text console, and all is well > >>>>>> until X tries to start. Then I get a blank screen. killall -9 Xorg > >>>>>> from ssh causes these errors to be logged: > >>>>>> > >>>>>> > >>>>>> [ 226.239747] [drm:atom_op_jump] *ERROR* atombios stuck in loop for > >>>>>> more than 5secs aborting > >>>>>> [ 226.239751] [drm:atom_execute_table_locked] *ERROR* atombios stuck > >>>>>> executing CD34 (len 55, WS 0, PS 0) @ 0xCD57 > >>>>>> [ 231.241492] [drm:atom_op_jump] *ERROR* atombios stuck in loop for > >>>>>> more than 5secs aborting > >>>>>> [ 231.241496] [drm:atom_execute_table_locked] *ERROR* atombios stuck > >>>>>> executing CD6C (len 62, WS 0, PS 0) @ 0xCD88 > >>>>>> [ 236.243111] [drm:atom_op_jump] *ERROR* atombios stuck in loop for > >>>>>> more than 5secs aborting > >>>>>> [ 236.243115] [drm:atom_execute_table_locked] *ERROR* atombios stuck > >>>>>> executing CD6C (len 62, WS 0, PS 0) @ 0xCD88 > >>>>>> [ 241.244625] [drm:atom_op_jump] *ERROR* atombios stuck in loop for > >>>>>> more than 5secs aborting > >>>>>> [ 241.244628] [drm:atom_execute_table_locked] *ERROR* atombios stuck > >>>>>> executing CD6C (len 62, WS 0, PS 0) @ 0xCD88 > >>>>>> > >>>>>> > >>>>>> lspci -vvvxxxnn on 3.14-rc7+ says: > >>>>>> > >>>>>> 09:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. > >>>>>> [AMD/ATI] Caicos [Radeon HD 6450/7450/8450 / R5 230 OEM] [1002:6779] > >>>>>> (rev ff) (prog-if ff) > >>>>>> !!! Unknown header type 7f > >>>>>> Kernel driver in use: radeon > >>>>>> 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > >>>>>> 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > >>>>>> 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > >>>>>> 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > >>>>>> > >>>>>> 09:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] > >>>>>> Caicos HDMI Audio [Radeon HD 6400 Series] [1002:aa98] (rev ff) > >>>>>> (prog-if ff) > >>>>>> !!! Unknown header type 7f > >>>>>> Kernel driver in use: snd_hda_intel > >>>>>> 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > >>>>>> 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > >>>>>> 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > >>>>>> 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff > >>>>>> > >>>>>> (oops!) > >>>>>> > >>>>>> On 3.13, it says: > >>>>>> > >>>>>> 09:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. > >>>>>> [AMD/ATI] Caicos [Radeon HD 6450/7450/8450 / R5 230 OEM] [1002:6779] > >>>>>> (prog-if 00 [VGA controller]) > >>>>>> Subsystem: PC Partner Limited / Sapphire Technology Radeon HD > >>>>>> 6450 1 GB DDR3 [174b:e164] > >>>>>> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > >>>>>> ParErr- Stepping- SERR- FastB2B- DisINTx+ > >>>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > >>>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- > >>>>>> Latency: 0, Cache Line Size: 64 bytes > >>>>>> Interrupt: pin A routed to IRQ 92 > >>>>>> Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M] > >>>>>> Region 2: Memory at f4a20000 (64-bit, non-prefetchable) [size=128K] > >>>>>> Region 4: I/O ports at c000 [size=256] > >>>>>> Expansion ROM at f4a00000 [disabled] [size=128K] > >>>>>> Capabilities: <access denied> > >>>>>> Kernel driver in use: radeon > >>>>>> 00: 02 10 79 67 07 04 10 00 00 00 00 03 10 00 80 00 > >>>>>> 10: 0c 00 00 e0 00 00 00 00 04 00 a2 f4 00 00 00 00 > >>>>>> 20: 01 c0 00 00 00 00 00 00 00 00 00 00 4b 17 64 e1 > >>>>>> 30: 00 00 a0 f4 50 00 00 00 00 00 00 00 0a 01 00 00 > >>>>>> > >>>>>> 09:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] > >>>>>> Caicos HDMI Audio [Radeon HD 6400 Series] [1002:aa98] > >>>>>> Subsystem: PC Partner Limited / Sapphire Technology Radeon HD > >>>>>> 6450 1GB DDR3 [174b:aa98] > >>>>>> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > >>>>>> ParErr- Stepping- SERR- FastB2B- DisINTx+ > >>>>>> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > >>>>>> <TAbort- <MAbort- >SERR- <PERR- INTx- > >>>>>> Latency: 0, Cache Line Size: 64 bytes > >>>>>> Interrupt: pin B routed to IRQ 96 > >>>>>> Region 0: Memory at f4a40000 (64-bit, non-prefetchable) [size=16K] > >>>>>> Capabilities: <access denied> > >>>>>> Kernel driver in use: snd_hda_intel > >>>>>> 00: 02 10 98 aa 06 04 10 00 00 00 03 04 10 00 80 00 > >>>>>> 10: 04 00 a4 f4 00 00 00 00 00 00 00 00 00 00 00 00 > >>>>>> 20: 00 00 00 00 00 00 00 00 00 00 00 00 4b 17 98 aa > >>>>>> 30: 00 00 00 00 50 00 00 00 00 00 00 00 05 02 00 00 > >>>>>> > >>>>>> Logs attached. > >>> > >>> Hi Andy, > >>> > >>> I'm really sorry that you tripped over this, but thanks a lot for the > >>> report. Is there any chance the box is currently running v3.13, and > >>> you could collect the dmesg log from it? I don't see anything unusual > >>> from a PCI perspective in the v3.14-rc7 dmesg; all the PCI device > >>> resources look fine, and we didn't reassign anything. It seems like > >>> the 0000:09:00.x devices just stopped responding for some reason, and > >>> the PCI core shouldn't really be involved after the radeon driver > >>> claims and enables those devices. But it's possible I'd get a clue by > >>> comparing the v3.13 and v3.14-rc7 dmesg logs. > >> > >> Attached. I also clearly screwed something up about my 3.14 config -- > >> I meant for it to match the Fedora config, but it doesn't. At least > >> NR_CPUs is too low. That shoudn't break radeon, but maybe something > >> odd happens. > >> > >> 3.14 also complains that it can't find an AGP bridge. 3.13 does not > >> complain about that. > > > > CONFIG_GART_IOMMU is not defined for the 3.13.6-200.rc20.x86_64 > > kernel, but apparently it is for your v3.14-rc7 kernel. That explains > > the "No AGP bridge found" difference. > > > > I'm afraid I still can't shed any light on the problem with the radeon device. > > Is there any news on this? It would be a shame to release v3.14 with > a known regression. > > I opened https://bugzilla.kernel.org/show_bug.cgi?id=73041 as a place > to archive the dmesg, etc. I didn't see any resolution on this (and I haven't done anything with it myself). If this is still a problem, could it be the same as https://bugzilla.kernel.org/show_bug.cgi?id=79701 ? There's a fix for 79701 in linux-next as of 2014-09-16: https://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/commit/?h=pci/hotplug-vga&id=b440bde74f043c8ec31081cb59c9a53ade954701 Bjorn _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
