From: Gustavo Padovan <gustavo.padovan@xxxxxxxxxxxxxxx>
As a preparation for atomic updates we need to split the code to check
everything we are going to commit first. This patch starts the work to
split intel_primary_plane_setplane() into check() and commit() parts.
More work is expected on this to get a better split of the two steps.
Ideally the commit() step should never fail.
Signed-off-by: Gustavo Padovan <gustavo.padovan@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_display.c | 133 ++++++++++++++++++++---------------
1 file changed, 75 insertions(+), 58 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 0f036cd..39c57c2 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -11663,63 +11663,37 @@ disable_unpin:
}
static int
-intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc,
- struct drm_framebuffer *fb, int crtc_x, int crtc_y,
- unsigned int crtc_w, unsigned int crtc_h,
- uint32_t src_x, uint32_t src_y,
- uint32_t src_w, uint32_t src_h)
+intel_check_primary_plane(struct drm_plane *plane,
+ struct intel_plane_state *state)
{
+ struct drm_crtc *crtc = state->crtc;
+ struct drm_framebuffer *fb = state->fb;
+ struct drm_rect *dest = &state->dst;
+ struct drm_rect *src = &state->src;
+ const struct drm_rect *clip = &state->clip;
+
+ return drm_plane_helper_check_update(plane, crtc, fb,
+ src, dest, clip,
+ DRM_PLANE_HELPER_NO_SCALING,
+ DRM_PLANE_HELPER_NO_SCALING,
+ false, true, &state->visible);
+}
+
+static int
+intel_commit_primary_plane(struct drm_plane *plane,
+ struct intel_plane_state *state)
+{
+ struct drm_crtc *crtc = state->crtc;
+ struct drm_framebuffer *fb = state->fb;
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct drm_i915_gem_object *obj = intel_fb_obj(fb);
struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->fb);
- struct drm_rect dest = {
- /* integer pixels */
- .x1 = crtc_x,
- .y1 = crtc_y,
- .x2 = crtc_x + crtc_w,
- .y2 = crtc_y + crtc_h,
- };
- struct drm_rect src = {
- /* 16.16 fixed point */
- .x1 = src_x,
- .y1 = src_y,
- .x2 = src_x + src_w,
- .y2 = src_y + src_h,
- };
- const struct drm_rect clip = {
- /* integer pixels */
- .x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0,
- .y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0,
- };
- const struct {
- int crtc_x, crtc_y;
- unsigned int crtc_w, crtc_h;
- uint32_t src_x, src_y, src_w, src_h;
- } orig = {
- .crtc_x = crtc_x,
- .crtc_y = crtc_y,
- .crtc_w = crtc_w,
- .crtc_h = crtc_h,
- .src_x = src_x,
- .src_y = src_y,
- .src_w = src_w,
- .src_h = src_h,
- };
struct intel_plane *intel_plane = to_intel_plane(plane);
- bool visible;
+ struct drm_rect *src = &state->src;
int ret;
- ret = drm_plane_helper_check_update(plane, crtc, fb,
- &src, &dest, &clip,
- DRM_PLANE_HELPER_NO_SCALING,
- DRM_PLANE_HELPER_NO_SCALING,
- false, true, &visible);
-
- if (ret)
- return ret;
-
/*
* If the CRTC isn't enabled, we're just pinning the framebuffer,
* updating the fb pointer, and returning without touching the
@@ -11754,7 +11728,7 @@ intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc,
* happens if userspace explicitly disables the plane by passing fb=0
* because plane->fb still gets set and pinned.
*/
- if (!visible) {
+ if (!state->visible) {
mutex_lock(&dev->struct_mutex);
/*
@@ -11801,7 +11775,7 @@ intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc,
intel_disable_fbc(dev);
}
}
- ret = intel_pipe_set_base(crtc, src.x1, src.y1, fb);
+ ret = intel_pipe_set_base(crtc, src->x1, src->y1, fb);
if (ret)
return ret;
@@ -11809,19 +11783,62 @@ intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc,
intel_enable_primary_hw_plane(plane, crtc);
}
- intel_plane->crtc_x = orig.crtc_x;
- intel_plane->crtc_y = orig.crtc_y;
- intel_plane->crtc_w = orig.crtc_w;
- intel_plane->crtc_h = orig.crtc_h;
- intel_plane->src_x = orig.src_x;
- intel_plane->src_y = orig.src_y;
- intel_plane->src_w = orig.src_w;
- intel_plane->src_h = orig.src_h;
+ intel_plane->crtc_x = state->orig_dst.x1;
+ intel_plane->crtc_y = state->orig_dst.y1;
+ intel_plane->crtc_w = drm_rect_width(&state->orig_dst);
+ intel_plane->crtc_h = drm_rect_height(&state->orig_dst);
+ intel_plane->src_x = state->orig_src.x1;
+ intel_plane->src_y = state->orig_src.y1;
+ intel_plane->src_w = drm_rect_width(&state->orig_src);
+ intel_plane->src_h = drm_rect_height(&state->orig_src);
intel_plane->obj = obj;
return 0;
}
+static int
+intel_primary_plane_setplane(struct drm_plane *plane, struct drm_crtc *crtc,
+ struct drm_framebuffer *fb, int crtc_x, int crtc_y,
+ unsigned int crtc_w, unsigned int crtc_h,
+ uint32_t src_x, uint32_t src_y,
+ uint32_t src_w, uint32_t src_h)
+{
+ struct intel_plane_state state;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int ret;
+
+ state.crtc = crtc;
+ state.fb = fb;
+
+ /* sample coordinates in 16.16 fixed point */
+ state.src.x1 = src_x;
+ state.src.x2 = src_x + src_w;
+ state.src.y1 = src_y;
+ state.src.y2 = src_y + src_h;
+
+ /* integer pixels */
+ state.dst.x1 = crtc_x;
+ state.dst.x2 = crtc_x + crtc_w;
+ state.dst.y1 = crtc_y;
+ state.dst.y2 = crtc_y + crtc_h;
+
+ state.clip.x1 = 0;
+ state.clip.y1 = 0;
+ state.clip.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0;
+ state.clip.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0;
+
+ state.orig_src = state.src;
+ state.orig_dst = state.dst;
+
+ ret = intel_check_primary_plane(plane, &state);
+ if (ret)
+ return ret;
+
+ intel_commit_primary_plane(plane, &state);
+
+ return 0;
+}
+
/* Common destruction function for both primary and cursor planes */
static void intel_plane_destroy(struct drm_plane *plane)
{
--
1.9.3
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
