From: Gustavo Padovan <gustavo.padovan@xxxxxxxxxxxxxxx>
Due to the upcoming atomic modesetting feature we need to separate
some update functions into a check step that can fail and a commit
step that should, ideally, never fail.
This commit splits intel_update_plane() and its commit part can still
fail due to the fb pinning procedure.
v2: use the new struct intel_plane_state to store information
between check and commit stages.
Signed-off-by: Gustavo Padovan <gustavo.padovan@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_sprite.c | 236 ++++++++++++++++++++++--------------
1 file changed, 146 insertions(+), 90 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c
index 4cbe286..062eca2 100644
--- a/drivers/gpu/drm/i915/intel_sprite.c
+++ b/drivers/gpu/drm/i915/intel_sprite.c
@@ -845,57 +845,28 @@ static bool colorkey_enabled(struct intel_plane *intel_plane)
}
static int
-intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
- struct drm_framebuffer *fb, int crtc_x, int crtc_y,
- unsigned int crtc_w, unsigned int crtc_h,
- uint32_t src_x, uint32_t src_y,
- uint32_t src_w, uint32_t src_h)
+intel_check_sprite_plane(struct drm_plane *plane,
+ struct intel_plane_state *pstate)
{
- struct drm_device *dev = plane->dev;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_crtc *intel_crtc = to_intel_crtc(pstate->crtc);
struct intel_plane *intel_plane = to_intel_plane(plane);
- enum pipe pipe = intel_crtc->pipe;
+ struct drm_framebuffer *fb = pstate->fb;
struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
struct drm_i915_gem_object *obj = intel_fb->obj;
- struct drm_i915_gem_object *old_obj = intel_plane->obj;
- int ret;
- bool primary_enabled;
- bool visible;
+ int crtc_x = pstate->crtc_x;
+ int crtc_y = pstate->crtc_y;
+ int crtc_w = pstate->crtc_w;
+ int crtc_h = pstate->crtc_h;
+ int src_x = pstate->src_x;
+ int src_y = pstate->src_y;
+ int src_w = pstate->src_w;
+ int src_h = pstate->src_h;
+ struct drm_rect *src = &pstate->src;
+ struct drm_rect *dst = &pstate->dst;
+ struct drm_rect *clip = &pstate->clip;
int hscale, vscale;
int max_scale, min_scale;
int pixel_size = drm_format_plane_cpp(fb->pixel_format, 0);
- struct drm_rect src = {
- /* sample coordinates in 16.16 fixed point */
- .x1 = src_x,
- .x2 = src_x + src_w,
- .y1 = src_y,
- .y2 = src_y + src_h,
- };
- struct drm_rect dst = {
- /* integer pixels */
- .x1 = crtc_x,
- .x2 = crtc_x + crtc_w,
- .y1 = crtc_y,
- .y2 = crtc_y + crtc_h,
- };
- const struct drm_rect clip = {
- .x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0,
- .y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0,
- };
- const struct {
- int crtc_x, crtc_y;
- unsigned int crtc_w, crtc_h;
- uint32_t src_x, src_y, src_w, src_h;
- } orig = {
- .crtc_x = crtc_x,
- .crtc_y = crtc_y,
- .crtc_w = crtc_w,
- .crtc_h = crtc_h,
- .src_x = src_x,
- .src_y = src_y,
- .src_w = src_w,
- .src_h = src_h,
- };
/* Don't modify another pipe's plane */
if (intel_plane->pipe != intel_crtc->pipe) {
@@ -927,55 +898,55 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
max_scale = intel_plane->max_downscale << 16;
min_scale = intel_plane->can_scale ? 1 : (1 << 16);
- drm_rect_rotate(&src, fb->width << 16, fb->height << 16,
+ drm_rect_rotate(src, fb->width << 16, fb->height << 16,
intel_plane->rotation);
- hscale = drm_rect_calc_hscale_relaxed(&src, &dst, min_scale, max_scale);
+ hscale = drm_rect_calc_hscale_relaxed(src, dst, min_scale, max_scale);
BUG_ON(hscale < 0);
- vscale = drm_rect_calc_vscale_relaxed(&src, &dst, min_scale, max_scale);
+ vscale = drm_rect_calc_vscale_relaxed(src, dst, min_scale, max_scale);
BUG_ON(vscale < 0);
- visible = drm_rect_clip_scaled(&src, &dst, &clip, hscale, vscale);
+ pstate->visible = drm_rect_clip_scaled(src, dst, clip, hscale, vscale);
- crtc_x = dst.x1;
- crtc_y = dst.y1;
- crtc_w = drm_rect_width(&dst);
- crtc_h = drm_rect_height(&dst);
+ crtc_x = dst->x1;
+ crtc_y = dst->y1;
+ crtc_w = drm_rect_width(dst);
+ crtc_h = drm_rect_height(dst);
- if (visible) {
+ if (pstate->visible) {
/* check again in case clipping clamped the results */
- hscale = drm_rect_calc_hscale(&src, &dst, min_scale, max_scale);
+ hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale);
if (hscale < 0) {
DRM_DEBUG_KMS("Horizontal scaling factor out of limits\n");
- drm_rect_debug_print(&src, true);
- drm_rect_debug_print(&dst, false);
+ drm_rect_debug_print(src, true);
+ drm_rect_debug_print(dst, false);
return hscale;
}
- vscale = drm_rect_calc_vscale(&src, &dst, min_scale, max_scale);
+ vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale);
if (vscale < 0) {
DRM_DEBUG_KMS("Vertical scaling factor out of limits\n");
- drm_rect_debug_print(&src, true);
- drm_rect_debug_print(&dst, false);
+ drm_rect_debug_print(src, true);
+ drm_rect_debug_print(dst, false);
return vscale;
}
/* Make the source viewport size an exact multiple of the scaling factors. */
- drm_rect_adjust_size(&src,
- drm_rect_width(&dst) * hscale - drm_rect_width(&src),
- drm_rect_height(&dst) * vscale - drm_rect_height(&src));
+ drm_rect_adjust_size(src,
+ drm_rect_width(dst) * hscale - drm_rect_width(src),
+ drm_rect_height(dst) * vscale - drm_rect_height(src));
- drm_rect_rotate_inv(&src, fb->width << 16, fb->height << 16,
+ drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16,
intel_plane->rotation);
/* sanity check to make sure the src viewport wasn't enlarged */
- WARN_ON(src.x1 < (int) src_x ||
- src.y1 < (int) src_y ||
- src.x2 > (int) (src_x + src_w) ||
- src.y2 > (int) (src_y + src_h));
+ WARN_ON(src->x1 < (int) src_x ||
+ src->y1 < (int) src_y ||
+ src->x2 > (int) (src_x + src_w) ||
+ src->y2 > (int) (src_y + src_h));
/*
* Hardware doesn't handle subpixel coordinates.
@@ -983,10 +954,10 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
* increase the source viewport size, because that could
* push the downscaling factor out of bounds.
*/
- src_x = src.x1 >> 16;
- src_w = drm_rect_width(&src) >> 16;
- src_y = src.y1 >> 16;
- src_h = drm_rect_height(&src) >> 16;
+ src_x = src->x1 >> 16;
+ src_w = drm_rect_width(src) >> 16;
+ src_y = src->y1 >> 16;
+ src_h = drm_rect_height(src) >> 16;
if (format_is_yuv(fb->pixel_format)) {
src_x &= ~1;
@@ -1000,12 +971,12 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
crtc_w &= ~1;
if (crtc_w == 0)
- visible = false;
+ pstate->visible = false;
}
}
/* Check size restrictions when scaling */
- if (visible && (src_w != crtc_w || src_h != crtc_h)) {
+ if (pstate->visible && (src_w != crtc_w || src_h != crtc_h)) {
unsigned int width_bytes;
WARN_ON(!intel_plane->can_scale);
@@ -1013,10 +984,10 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
/* FIXME interlacing min height is 6 */
if (crtc_w < 3 || crtc_h < 3)
- visible = false;
+ pstate->visible = false;
if (src_w < 3 || src_h < 3)
- visible = false;
+ pstate->visible = false;
width_bytes = ((src_x * pixel_size) & 63) + src_w * pixel_size;
@@ -1027,17 +998,55 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
}
}
- dst.x1 = crtc_x;
- dst.x2 = crtc_x + crtc_w;
- dst.y1 = crtc_y;
- dst.y2 = crtc_y + crtc_h;
+ dst->x1 = crtc_x;
+ dst->x2 = crtc_x + crtc_w;
+ dst->y1 = crtc_y;
+ dst->y2 = crtc_y + crtc_h;
+
+ pstate->src_x = src_x;
+ pstate->src_y = src_y;
+ pstate->src_w = src_w;
+ pstate->src_h = src_h;
+ pstate->crtc_x = crtc_x;
+ pstate->crtc_y = crtc_y;
+ pstate->crtc_w = crtc_w;
+ pstate->crtc_x = crtc_h;
+
+ return 0;
+}
+
+static int
+intel_commit_sprite_plane(struct drm_plane *plane,
+ struct intel_plane_state *pstate)
+{
+ struct drm_device *dev = plane->dev;
+ struct drm_crtc *crtc = pstate->crtc;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_plane *intel_plane = to_intel_plane(plane);
+ enum pipe pipe = intel_crtc->pipe;
+ struct drm_framebuffer *fb = pstate->fb;
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
+ struct drm_i915_gem_object *obj = intel_fb->obj;
+ struct drm_i915_gem_object *old_obj = intel_plane->obj;
+ int crtc_x = pstate->crtc_x;
+ int crtc_y = pstate->crtc_y;
+ int crtc_w = pstate->crtc_w;
+ int crtc_h = pstate->crtc_h;
+ int src_x = pstate->src_x;
+ int src_y = pstate->src_y;
+ int src_w = pstate->src_w;
+ int src_h = pstate->src_h;
+ struct drm_rect *dst = &pstate->dst;
+ struct drm_rect *clip = &pstate->clip;
+ int ret;
+ bool primary_enabled;
/*
* If the sprite is completely covering the primary plane,
* we can disable the primary and save power.
*/
- primary_enabled = !drm_rect_equals(&dst, &clip) || colorkey_enabled(intel_plane);
- WARN_ON(!primary_enabled && !visible && intel_crtc->active);
+ primary_enabled = !drm_rect_equals(dst, clip) || colorkey_enabled(intel_plane);
+ WARN_ON(!primary_enabled && !pstate->visible && intel_crtc->active);
mutex_lock(&dev->struct_mutex);
@@ -1055,14 +1064,14 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
if (ret)
return ret;
- intel_plane->crtc_x = orig.crtc_x;
- intel_plane->crtc_y = orig.crtc_y;
- intel_plane->crtc_w = orig.crtc_w;
- intel_plane->crtc_h = orig.crtc_h;
- intel_plane->src_x = orig.src_x;
- intel_plane->src_y = orig.src_y;
- intel_plane->src_w = orig.src_w;
- intel_plane->src_h = orig.src_h;
+ intel_plane->crtc_x = pstate->orig_dst.x1;
+ intel_plane->crtc_y = pstate->orig_dst.y1;
+ intel_plane->crtc_w = drm_rect_width(&pstate->orig_dst);
+ intel_plane->crtc_h = drm_rect_height(&pstate->orig_dst);
+ intel_plane->src_x = pstate->orig_src.x1;
+ intel_plane->src_y = pstate->orig_src.y1;
+ intel_plane->src_w = drm_rect_width(&pstate->orig_src);
+ intel_plane->src_h = drm_rect_height(&pstate->orig_src);
intel_plane->obj = obj;
if (intel_crtc->active) {
@@ -1076,7 +1085,7 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
if (primary_was_enabled && !primary_enabled)
intel_pre_disable_primary(crtc);
- if (visible)
+ if (pstate->visible)
intel_plane->update_plane(plane, crtc, fb, obj,
crtc_x, crtc_y, crtc_w, crtc_h,
src_x, src_y, src_w, src_h);
@@ -1109,6 +1118,53 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
}
static int
+intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc,
+ struct drm_framebuffer *fb, int crtc_x, int crtc_y,
+ unsigned int crtc_w, unsigned int crtc_h,
+ uint32_t src_x, uint32_t src_y,
+ uint32_t src_w, uint32_t src_h)
+{
+ struct intel_plane_state pstate;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int ret;
+
+ pstate.crtc = crtc;
+ pstate.fb = fb;
+ pstate.crtc_x = crtc_x;
+ pstate.crtc_y = crtc_y;
+ pstate.crtc_w = crtc_w;
+ pstate.crtc_h = crtc_h;
+ pstate.src_x = src_x;
+ pstate.src_y = src_y;
+ pstate.src_w = src_w;
+ pstate.src_h = src_h;
+ pstate.src.x1 = src_x,
+ pstate.src.x2 = src_x + src_w,
+ pstate.src.y1 = src_y,
+ pstate.src.y2 = src_y + src_h,
+ pstate.dst.x1 = crtc_x,
+ pstate.dst.x2 = crtc_x + crtc_w,
+ pstate.dst.y1 = crtc_y,
+ pstate.dst.y2 = crtc_y + crtc_h,
+ pstate.clip.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0,
+ pstate.clip.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0,
+ pstate.orig_src.x1 = src_x,
+ pstate.orig_src.x2 = src_x + src_w,
+ pstate.orig_src.y1 = src_y,
+ pstate.orig_src.y2 = src_y + src_h,
+ pstate.orig_dst.x1 = crtc_x,
+ pstate.orig_dst.x2 = crtc_x + crtc_w,
+ pstate.orig_dst.y1 = crtc_y,
+ pstate.orig_dst.y2 = crtc_y + crtc_h,
+
+ ret = intel_check_sprite_plane(plane, &pstate);
+ if (ret)
+ return ret;
+
+ return intel_commit_sprite_plane(plane, &pstate);
+}
+
+static int
intel_disable_plane(struct drm_plane *plane)
{
struct drm_device *dev = plane->dev;
--
1.9.3
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
