From: Gustavo Padovan <gustavo.padovan@xxxxxxxxxxxxxxx>
Create intel_crtc_cursor_create_obj() to check any need setting
before we call intel_crtc_cursor_set_obj() to apply the cursor updates.
intel_crtc_cursor_check_obj() must always be called before
intel_crtc_cursor_set_obj().
Signed-off-by: Gustavo Padovan <gustavo.padovan@xxxxxxxxxxxxxxx>
---
drivers/gpu/drm/i915/intel_display.c | 115 ++++++++++++++++++++++++-----------
1 file changed, 80 insertions(+), 35 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 0173c53..86c8fa3 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8232,30 +8232,25 @@ static bool cursor_size_ok(struct drm_device *dev,
}
/*
- * intel_crtc_cursor_set_obj - Set cursor to specified GEM object
+ * intel_crtc_cursor_check_obj - Check settings for a specified GEM object
*
- * Note that the object's reference will be consumed if the update fails. If
- * the update succeeds, the reference of the old object (if any) will be
- * consumed.
+ * Note that the object's reference will be consumed if the check fails. If
+ * the check succeeds, the reference of the old object (if any) will be
+ * consumed in intel_crtc_cursor_set_obj(). It must be called before
+ * intel_crtc_cursor_set_obj()
*/
-static int intel_crtc_cursor_set_obj(struct drm_crtc *crtc,
+static int intel_crtc_cursor_check_obj(struct drm_crtc *crtc,
struct drm_i915_gem_object *obj,
uint32_t width, uint32_t height)
+
{
struct drm_device *dev = crtc->dev;
- struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
- enum pipe pipe = intel_crtc->pipe;
- unsigned old_width, stride;
- uint32_t addr;
+ unsigned stride;
int ret;
/* if we want to turn off the cursor ignore width and height */
- if (!obj) {
- DRM_DEBUG_KMS("cursor off\n");
- addr = 0;
- mutex_lock(&dev->struct_mutex);
- goto finish;
- }
+ if (!obj)
+ return 0;
/* Check for which cursor types we support */
if (!cursor_size_ok(dev, width, height)) {
@@ -8302,7 +8297,6 @@ static int intel_crtc_cursor_set_obj(struct drm_crtc *crtc,
goto fail_unpin;
}
- addr = i915_gem_obj_ggtt_offset(obj);
} else {
int align = IS_I830(dev) ? 16 * 1024 : 256;
ret = i915_gem_object_attach_phys(obj, align);
@@ -8310,8 +8304,50 @@ static int intel_crtc_cursor_set_obj(struct drm_crtc *crtc,
DRM_DEBUG_KMS("failed to attach phys object\n");
goto fail_locked;
}
- addr = obj->phys_handle->busaddr;
}
+ mutex_unlock(&dev->struct_mutex);
+
+ return 0;
+
+fail_unpin:
+ i915_gem_object_unpin_from_display_plane(obj);
+fail_locked:
+ mutex_unlock(&dev->struct_mutex);
+fail:
+ drm_gem_object_unreference_unlocked(&obj->base);
+ return ret;
+}
+
+/*
+ * intel_crtc_cursor_set_obj - Set cursor to specified GEM object
+ *
+ * intel_crtc_cursor_check_obj() must be called before this function
+ * so check for failures can be done before apply the update.
+ */
+static void intel_crtc_cursor_set_obj(struct drm_crtc *crtc,
+ struct drm_i915_gem_object *obj,
+ uint32_t width, uint32_t height)
+{
+ struct drm_device *dev = crtc->dev;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ enum pipe pipe = intel_crtc->pipe;
+ unsigned old_width;
+ uint32_t addr;
+
+ /* if we want to turn off the cursor ignore width and height */
+ if (!obj) {
+ DRM_DEBUG_KMS("cursor off\n");
+ addr = 0;
+ mutex_lock(&dev->struct_mutex);
+ goto finish;
+ }
+
+ /* we only need to pin inside GTT if cursor is non-phy */
+ mutex_lock(&dev->struct_mutex);
+ if (!INTEL_INFO(dev)->cursor_needs_physical)
+ addr = i915_gem_obj_ggtt_offset(obj);
+ else
+ addr = obj->phys_handle->busaddr;
finish:
if (intel_crtc->cursor_bo) {
@@ -8337,15 +8373,6 @@ static int intel_crtc_cursor_set_obj(struct drm_crtc *crtc,
}
intel_frontbuffer_flip(dev, INTEL_FRONTBUFFER_CURSOR(pipe));
-
- return 0;
-fail_unpin:
- i915_gem_object_unpin_from_display_plane(obj);
-fail_locked:
- mutex_unlock(&dev->struct_mutex);
-fail:
- drm_gem_object_unreference_unlocked(&obj->base);
- return ret;
}
static void intel_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
@@ -11733,12 +11760,20 @@ static struct drm_plane *intel_primary_plane_create(struct drm_device *dev,
static int
intel_cursor_plane_disable(struct drm_plane *plane)
{
+ int ret;
+
if (!plane->fb)
return 0;
BUG_ON(!plane->crtc);
- return intel_crtc_cursor_set_obj(plane->crtc, NULL, 0, 0);
+ ret = intel_crtc_cursor_check_obj(plane->crtc, NULL, 0, 0);
+ if (ret)
+ return ret;
+
+ intel_crtc_cursor_set_obj(plane->crtc, NULL, 0, 0);
+
+ return 0;
}
static int
@@ -11749,6 +11784,7 @@ intel_check_cursor_plane(struct drm_plane *plane, struct drm_crtc *crtc,
uint32_t src_h, bool *visible)
{
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
struct drm_rect dest = {
/* integer pixels */
.x1 = crtc_x,
@@ -11768,12 +11804,21 @@ intel_check_cursor_plane(struct drm_plane *plane, struct drm_crtc *crtc,
.x2 = intel_crtc->active ? intel_crtc->config.pipe_src_w : 0,
.y2 = intel_crtc->active ? intel_crtc->config.pipe_src_h : 0,
};
+ int ret;
- return drm_plane_helper_check_update(plane, crtc, fb,
- &src, &dest, &clip,
- DRM_PLANE_HELPER_NO_SCALING,
- DRM_PLANE_HELPER_NO_SCALING,
- true, true, visible);
+ ret = drm_plane_helper_check_update(plane, crtc, fb,
+ &src, &dest, &clip,
+ DRM_PLANE_HELPER_NO_SCALING,
+ DRM_PLANE_HELPER_NO_SCALING,
+ true, true, visible);
+ if (ret)
+ return ret;
+
+ if (fb != crtc->cursor->fb)
+ ret = intel_crtc_cursor_check_obj(crtc, intel_fb->obj,
+ crtc_w, crtc_h);
+
+ return ret;
}
static int
@@ -11789,15 +11834,15 @@ intel_commit_cursor_plane(struct drm_plane *plane, struct drm_crtc *crtc,
crtc->cursor_x = crtc_x;
crtc->cursor_y = crtc_y;
if (fb != crtc->cursor->fb) {
- return intel_crtc_cursor_set_obj(crtc, obj, crtc_w, crtc_h);
+ intel_crtc_cursor_set_obj(crtc, obj, crtc_w, crtc_h);
} else {
intel_crtc_update_cursor(crtc, visible);
intel_frontbuffer_flip(crtc->dev,
INTEL_FRONTBUFFER_CURSOR(intel_crtc->pipe));
-
- return 0;
}
+
+ return 0;
}
static int
--
1.9.3
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
