Add the DU device with a disabled state. Boards that want to enable the
DU need to specify the output topology
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/r8a7779.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 559788b..9689314 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -379,6 +379,30 @@
status = "disabled";
};
+ du: du@fff80000 {
+ compatible = "renesas,du-r8a7779";
+ reg = <0 0xfff80000 0 0x40000>;
+ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7779_CLK_DU>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb0: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ du_out_rgb1: endpoint {
+ };
+ };
+ };
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
--
1.8.5.5
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
