On Tue, Jul 29, 2014 at 02:58:23PM -0700, clinton.a.taylor@xxxxxxxxx wrote: > From: Clint Taylor <clinton.a.taylor@xxxxxxxxx> > > CEA SD interlaced modes use a horizontal 720 pixels that are pixel replicated to 1440. The current driver reports 1440 pixel to the OS and does not set pixel replicated modes. > > Signed-off-by: Clint Taylor <clinton.a.taylor@xxxxxxxxx> > --- > drivers/gpu/drm/drm_edid.c | 68 ++++++++++++++++++------------------- > drivers/gpu/drm/i915/intel_hdmi.c | 13 +++++++ > 2 files changed, 47 insertions(+), 34 deletions(-) > > diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c > index dfa9769..5233f4c 100644 > --- a/drivers/gpu/drm/drm_edid.c > +++ b/drivers/gpu/drm/drm_edid.c > @@ -632,26 +632,26 @@ static const struct drm_display_mode edid_cea_modes[] = { > DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC | > DRM_MODE_FLAG_INTERLACE), > .vrefresh = 60, .picture_aspect_ratio = HDMI_PICTURE_ASPECT_16_9, }, > - /* 6 - 1440x480i@60Hz */ > - { DRM_MODE("1440x480i", DRM_MODE_TYPE_DRIVER, 27000, 1440, 1478, > + /* 6 - 720(1440)x480i@60Hz */ > + { DRM_MODE("720x480i", DRM_MODE_TYPE_DRIVER, 27000, 720, 1478, I think the best thing here might be to halve all the horizontal timings (and the clock), and maybe do it with an explicit /2 to remind people that this is a bit special, and also the spec lists the doubled timings, so it's maybe a bit easier to compare with the spec that way. So perhaps something like this: DRM_MODE(..., 27000/2, 1440/2, 1478/2, ... <snip> > diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c > index 2422413..f8cdf7f 100644 > --- a/drivers/gpu/drm/i915/intel_hdmi.c > +++ b/drivers/gpu/drm/i915/intel_hdmi.c > @@ -918,6 +918,19 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder, > intel_hdmi->color_range = 0; > } > > + /* Adjust pipe timings for pixel doubled modes */ > + if ((adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK)) { > + adjusted_mode->hsync_start /= 2; > + adjusted_mode->hsync_end /= 2; > + adjusted_mode->htotal /= 2; > + > + drm_mode_set_crtcinfo(adjusted_mode, 0); > + > + /* Set 2x pixel double on pipe */ > + pipe_config->pixel_multiplier = 2; > + pipe_config->port_clock = adjusted_mode->crtc_clock; > + } If you halve the timings already in drm_edid.c all of this would be reduced to just: if (adjusted_mode->flags & DRM_MODE_FLAG_DBLCLK) pipe_config->pixel_multiplier = 2; > + > if (intel_hdmi->color_range) > pipe_config->limited_color_range = true; > > -- > 1.7.9.5 > > _______________________________________________ > Intel-gfx mailing list > Intel-gfx@xxxxxxxxxxxxxxxxxxxxx > http://lists.freedesktop.org/mailman/listinfo/intel-gfx -- Ville Syrjälä Intel OTC _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel