[Bug 82201] [HAWAII] GPU doesn't reclock, poor 3D performance

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Comment # 3 on bug 82201 from
Created attachment 104081 [details]
VBIOS from

(In reply to comment #2)
> Please attach your dmesg output with radeon.dpm=1 set on the kernel command
> line in grub.  That dumps some additional debugging output.

I'll reboot later and attach that dmesg, I'm currently bisecting X for bug
82055.

>  Also please attach a copy of your vbios.

Here you go. Below you find the lspci output, maybe you can reach out to XFX
directly, if that should help:
> 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Hawaii PRO [Radeon R9 290] (prog-if 00 [VGA controller])
>         Subsystem: XFX Pine Group Inc. Device 9295
>         Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
>         Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
>         Latency: 0, Cache Line Size: 64 bytes
>         Interrupt: pin A routed to IRQ 45
>         Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M]
>         Region 2: Memory at f0000000 (64-bit, prefetchable) [size=8M]
>         Region 4: I/O ports at e000 [size=256]
>         Region 5: Memory at f7e00000 (32-bit, non-prefetchable) [size=256K]
>         Expansion ROM at f7e40000 [disabled] [size=128K]
>         Capabilities: [48] Vendor Specific Information: Len=08 <?>
>         Capabilities: [50] Power Management version 3
>                 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-)
>                 Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
>         Capabilities: [58] Express (v2) Legacy Endpoint, MSI 00
>                 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited
>                         ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
>                 DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
>                         RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
>                         MaxPayload 256 bytes, MaxReadReq 512 bytes
>                 DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-
>                 LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us
>                         ClockPM- Surprise- LLActRep- BwNot-
>                 LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
>                         ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
>                 LnkSta: Speed 8GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
>                 DevCap2: Completion Timeout: Not Supported, TimeoutDis-, LTR-, OBFF Not Supported
>                 DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
>                 LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
>                          Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
>                          Compliance De-emphasis: -6dB
>                 LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+, EqualizationPhase1+
>                          EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest-
>         Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
>                 Address: 00000000fee00358  Data: 0000
>         Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
>         Capabilities: [150 v2] Advanced Error Reporting
>                 UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
>                 UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
>                 CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>                 CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
>                 AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
>         Capabilities: [270 v1] #19
>         Capabilities: [2b0 v1] Address Translation Service (ATS)
>                 ATSCap: Invalidate Queue Depth: 00
>                 ATSCtl: Enable-, Smallest Translation Unit: 00
>         Capabilities: [2c0 v1] #13
>         Capabilities: [2d0 v1] #1b
>         Kernel driver in use: radeon


You are receiving this mail because:
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel

[Index of Archives]     [Linux DRI Users]     [Linux Intel Graphics]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]
  Powered by Linux