Signed-off-by: mark yao <yzq@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/video/rockchip-panel.txt | 34 ++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/Documentation/devicetree/bindings/video/rockchip-panel.txt b/Documentation/devicetree/bindings/video/rockchip-panel.txt
index f599806..f6d80f6 100644
--- a/Documentation/devicetree/bindings/video/rockchip-panel.txt
+++ b/Documentation/devicetree/bindings/video/rockchip-panel.txt
@@ -80,3 +80,37 @@ Example:
rockchip,data-width = <24>;
rockchip,panel = <&panel>;
};
+
+Rockchip RK3288 EDP interface
+================================
+Required properties:
+-compatible: "rockchip,rk3288-edp";
+
+- reg: physical base address of the controller and length
+- clocks: from common clock binding: handle to dp clock.
+ of memory mapped region.
+- clock-names: from common clock binding:
+ Required elements: "clk_edp"
+ "clk_edp_24m"
+ "clk_edp_24m_parent"
+ "pclk_edp"
+- rockchip,grf: this soc should set GRF regs, so need get grf here.
+- resets: Must contain an entry for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+ - edp
+- rockchip,panel: required a panel node
+
+Example:
+ edp: edp@ff970000 {
+ compatible = "rockchip,rk3288-edp";
+ reg = <0xff970000 0x4000>;
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_EDP>, <&cru SCLK_EDP_24M>, <&cru PCLK_EDP_CTRL>, <&xin24m>;
+ clock-names = "clk_edp", "clk_edp_24m", "pclk_edp", "clk_edp_24m_parent";
+
+ rockchip,grf = <&grf>;
+ resets = <&cru 111>;
+ reset-names = "edp";
+ rockchip,panel = <&panel>;
+ };
--
1.7.9.5
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
