This patch adds below two flags for LPM transfer, and it attaches LPM flags
to a msg in accordance with master's mode_flags set by LCD Panel driver.
MIPI_DSI_MODE_CMD_LPM
- If this flag is set by Panel driver, MIPI-DSI controller will tranfer
command data to Panel device in Low Power Mode.
MIPI_DSI_MODE_VIDEO_LPM
- If this flag is set by Panel driver, MIPI-DSI controller will tranfer
image data to Panel device in Low Power Mode.
And above two flags can be combined together to transfer command and video
data to Panel device.
MIPI DSI spec says,
"the host processor controls the desired mode of clock operation.
Host protocol and applications control Clock Lane operating mode
(High Speed or Low Power mode). System designers are responsible
for understanding the clock requirements for peripherals attached
to DSI and controlling clock behavior in accordance with those
requirements."
Some LCD Panel devices, nt35502a, would need LPM transfer support
because they should receive some initial commands with LPM by default
hardware setting.
Changelog v2: just add more descriptions.
Signed-off-by: Inki Dae <inki.dae@xxxxxxxxxxx>
Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
drivers/gpu/drm/drm_mipi_dsi.c | 3 +++
include/drm/drm_mipi_dsi.h | 4 ++++
2 files changed, 7 insertions(+)
diff --git a/drivers/gpu/drm/drm_mipi_dsi.c b/drivers/gpu/drm/drm_mipi_dsi.c
index e633df2..6b2bbda 100644
--- a/drivers/gpu/drm/drm_mipi_dsi.c
+++ b/drivers/gpu/drm/drm_mipi_dsi.c
@@ -232,6 +232,9 @@ int mipi_dsi_dcs_write(struct mipi_dsi_device *dsi, unsigned int channel,
break;
}
+ if (dsi->mode_flags & MIPI_DSI_MODE_CMD_LPM)
+ msg.flags = MIPI_DSI_MSG_USE_LPM;
+
return ops->transfer(dsi->host, &msg);
}
EXPORT_SYMBOL(mipi_dsi_dcs_write);
diff --git a/include/drm/drm_mipi_dsi.h b/include/drm/drm_mipi_dsi.h
index 944f33f..1c41e49 100644
--- a/include/drm/drm_mipi_dsi.h
+++ b/include/drm/drm_mipi_dsi.h
@@ -94,6 +94,10 @@ void mipi_dsi_host_unregister(struct mipi_dsi_host *host);
#define MIPI_DSI_MODE_VSYNC_FLUSH BIT(8)
/* disable EoT packets in HS mode */
#define MIPI_DSI_MODE_EOT_PACKET BIT(9)
+/* command low power mode */
+#define MIPI_DSI_MODE_CMD_LPM BIT(10)
+/* video low power mode */
+#define MIPI_DSI_MODE_VIDEO_LPM BIT(11)
enum mipi_dsi_pixel_format {
MIPI_DSI_FMT_RGB888,
--
1.7.9.5
_______________________________________________
dri-devel mailing list
dri-devel@xxxxxxxxxxxxxxxxxxxxx
http://lists.freedesktop.org/mailman/listinfo/dri-devel
