https://bugzilla.kernel.org/show_bug.cgi?id=60523 --- Comment #60 from Mathias Tillman <master.homer@xxxxxxxxx> --- I've done some further tests with overriding the power state level values as detailed above, here are my results: The stock values are level 0: sclk: 10000, mclk: 30000, vddc: 950, vddci: 950 level 1: sclk: 77500, mclk: 105000, vddc: 1100 vddci: 1150 level 2: sclk: 90000, mclk: 105000, vddc: 1175, vddci: 1150 sclk, vddc and vddci were all at their stock values for all power levels during my tests. I changed mclk on power level 2 to the values below (OK means that it does not get stuck in the highest power level): 95000 = OK 100000 = OK 104000 = OK 105000 = NOT OK 110000 = NOT OK So as you can see it gets stuck when the mclk value is 10500 or higher, but why that is I really have no idea. Could it be a firmware or VBIOS problem? -- You are receiving this mail because: You are watching the assignee of the bug. _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
