If connector->dpms is left untouched, it defaults to DRM_MODE_DPMS_ON (0). As a result, drm_helper_connector_dpms will exit when it will be asked to set the state to DRM_MODE_DPMS_ON, because it is already set. That issue prevented displays from turning on at boot. Signed-off-by: Denis Carikli <denis@xxxxxxxxxx> --- drivers/staging/imx-drm/parallel-display.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/staging/imx-drm/parallel-display.c b/drivers/staging/imx-drm/parallel-display.c index b567832..4ca61af 100644 --- a/drivers/staging/imx-drm/parallel-display.c +++ b/drivers/staging/imx-drm/parallel-display.c @@ -173,6 +173,13 @@ static int imx_pd_register(struct drm_device *drm, if (ret) return ret; + /* set the connector's dpms to OFF so that + * drm_helper_connector_dpms() won't return + * immediately since the current state is ON + * at this point. + */ + imxpd->connector.dpms = DRM_MODE_DPMS_OFF; + drm_encoder_helper_add(&imxpd->encoder, &imx_pd_encoder_helper_funcs); drm_encoder_init(drm, &imxpd->encoder, &imx_pd_encoder_funcs, DRM_MODE_ENCODER_NONE); -- 1.7.9.5 _______________________________________________ dri-devel mailing list dri-devel@xxxxxxxxxxxxxxxxxxxxx http://lists.freedesktop.org/mailman/listinfo/dri-devel
